Used Spitzenberger & Spies Supply Simulation for sale (11,189)

Condition: refurbished (used), Year of construction: 2015, SPITZENBERGER & SPIES Bordnetzsimulation Supply Simulation System PAS 15000/GN/KFZ/OPD The device is from VW. Update: Device overhauled by the manufacturer. As pictured. According to specifications, the following tests can be carried out: Audi BDM LAH XXX.915.181.XX ISO 7637-2 ISO 16750-2 ISO 21848 LV 124 SAE J 1113-11 VW TL 80101 VW TL 82066 VW TL 82366 Among others, the following components are installed: Nsdswg Rzfspfx Alhocu Power Supply NT 15000/GN/Kfz SyCore 2-Quadrant Amplifier PAS 15000/GN/Kfz Overvoltage Protection Device OPD 15000/GN/Kfz The instruction manual can gladly be sent by email in advance. Viewing welcome. Also see my other measurement and test equipment offers.

Condition: ready for operation (used), Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible. Nedex El Anspfx Alhjcu

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Nodszg U Dzepfx Alhocu Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. 0239398K Year of construction: 1993 Rated power: 6 kW Ncedpfeqv I S Ssx Alhou Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, Year of construction: 2006, machine/vehicle number: 20618, Heißfolienprägemaschine / Hot Foil Stamping American Supply HFS Year 2006 - Serial-No. 20618 Prgefläche / Hot Foil Stamping area max. 80 x 150mm Druckleistung / Pressure max. 600Kg Online-Video-Inspection by Skype-Video Ncodpfx Asup Eimjlhju We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Manufacturer: Engel / Bosch Operating pressure: 280 bar Capacity: 65 l/min Ncodpfxjiy Ddfs Alhju Overall dimensions: 1800 x 800 x 700 mm Voltage: 380 V Electric power: 15 kW

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Nedpfx Alow I A N Aehocu

Condition: good (used), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply, DC, 1 channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch enclosure Technical data: Manufacturer: TDK-LAMBDA Power supply type: Programmable laboratory power supply Display type: LED x2 Number of channels: 1 Output voltage: 0...10V DC Output current: 0...240A Max. power: 2.4kW Mounting: Rack 19" Output voltage resolution: 1.2mV Output current resolution: 28.8mA Voltage ripple and noise (regulated): ≤8Vrms, ≤60Vpp Input connector type: Terminal block Manufacturer series: GEN Operating temperature: 0...50°C Nsdpfozg Exvjx Alhecu Dimensions (width x height x depth): 423x43.6x432.8mm Parameter display: 4 digits Software: LabVIEW Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Knürr-Heinzinger Type: PHN 1200-4 Power Supply: Mains 1200 Volts 4 Amperes Condition: used Scope of delivery: (See image) Ncsdpfezgcbhex Alhsu (Subject to change and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003617 - Manufacturer Code: HVR02,2-W025N - Condition: Like new (showroom item) - Functionality: Fully operational - Compatible Machine: CNC HOMAG-IMA - Weight: 22KG - Dimensions: 70X46X34 - If interested, we offer an overhaul service; please contact us. Njdpozd Eyzjfx Alhecu

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: Ncjdpezd Ukpofx Alhou External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: good (used), Berger Nodpfx Aljzdqvhehscu Type: PSS 8 Berger Solar Simulator, Pulsed Solar Simulator Solar Simulator PSS 8 230 Volt, 50 Hz, 1000 W, 3.15 ATT Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Ifsys Type: 114100, Type: VL 13 Ncjdozdp Icepfx Alhou Screw feeding system Hopper system with 2x Vibroliner and 2x Vibrohopper 1x Return conveyor 2x Control unit FC 1000 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, For sale: two switch-mode power supplies removed from a Finn-Power L6A CO2 laser. Manufacturer: PRC Manufacturer’s code: D8946006S/10 | 0009 HV 401 and D8946006S/12 | 0106HV402 Revision: REV10 / REV12 Price per unit: 3000 EUR. If you have any further questions, please do not hesitate to ask. Ncedpfjy Tt Etjx Alhou

Condition: new, Manufacturer: Siemens Condition: New, meaning unused, original packaging opened Type: Built-in power supply Designation: SV-DC/DC Article number: A5E00166828 Application: Power supply for Siemens PCU50 Compatible platform: SINUMERIK / PCU50 PCU50 processor type: 333 MHz Design: Built-in module Power supply unit: DC/DC converter Application area: CNC controls and industrial automation technology Mounting type: Installation in control cabinet or control unit Ncodjzcw Ipepfx Alhou

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module Njdpfxexvrwds Alhocu -Manufacturer: LinMot, Switching Power Supply 72V/1000W -Type: S01-72/1000 -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm -Weight: 2.1 kg

Condition: ready for operation (used), Bosch NT600 Power Supply. Power supply unit, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nedpfx Alsi D Uayjhjcu

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo power supply, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Njdsi Ebrgspfx Alhocu

Condition: ready for operation (used), Fanuc A06B-6077-H111 Power Supply Module V03602951, the left fastening point of the rear connection cover is damaged, see photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please inquire about price separately! Nodpfx Aouvhrkslhocu

Condition: ready for operation (used), Siemens 6EV3055-0BC power supply, version K, serial number as shown in the photo, used, professionally refurbished and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. Ncsdpfxji Edv Ee Alheu

Condition: ready for operation (used), Fanuc A14B-0067-B001 04 Power Supply, serial number as shown in the photo, used, professionally refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Nedpfsi D Uz Dex Alhocu

Condition: ready for operation (used), Bosch NT600 power supply. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Ncsdpfji D Ua Dox Alhou

Condition: ready for operation (used), Bosch VM 5 / E-G – VM 5/E-G Power Supply, 1070916727, used, professionally refurbished and tested, comes with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. Ncjdpfoi D Ug Hox Alhou

Condition: ready for operation (used), Bosch NT 600 power supply, serial number as shown in the photo, used, minor signs of wear, 100% functional. Ncsdpfx Aloi D Uarshou

Condition: ready for operation (used), Contraves PS 700 DC power supply, used, in good condition, 100% functional. Ncodpfei D Umhex Alheu