Used Stöckel 12000 for sale (584)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressure: 14 bar, operating pressure: 14 bar, For sale: Stöckel steam boiler with Saacke oil burner. Optional gas burner available on request. Complete with water heater up to 250 degrees. The unit is in very good condition. Steam output: 12,000 kg/h. Maximum steam pressure: 14 bar. Delivery available at extra cost. Fpodpoyllf Isfx Adrsk On-site inspection possible. If you have any questions, please feel free to contact us.

Condition: used, Year of construction: 2021, functionality: fully functional, grinding length: 6,000 mm, grinding width: 800 mm, total height: 800 mm, Technical specifications: • Application: Surface grinding and profile grinding • Grinding area: 6000 x 800 x 800 mm • Grinding wheel: 500 x 100 x 203.20 mm • Spindle power: 43 kW • Connected load: 89 kW • Operating hours: approx. 4,400 machine operating hours / approx. 1,600 spindle operating hours • Year of manufacture: 2021 The machine is currently fully functional and can be inspected at the supplier’s premises by appointment. Price is quoted ex works in Lower Saxony; the machine will be prepared/packaged for transport. The machine can be taken over immediately. Equipment: • CAM profile grinding software “WinWop” • Diamond roll dressing unit with 160 mm diamond wheel Fsdpfx Adozcyccerspk • Coolant recirculation system • Grinding mist extraction system • Automatic balancing • Spark detection system • Belt filter system with magnetic separator • VPN connection for remote diagnostics/remote maintenance

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M60I/9035, Offer Number: M60I/9035 Machinetype: surface grinding machine Fpsdow N Dmxepfx Adrok Make: STÖCKEL Type: FX60/30 SPS Constr. year: 2010 table size: 600x250 mm Location: Germany

Condition: used, Year of construction: 2017, grinding range 600 x 300 x 400 mm magnetic plate size 600 x 300 mm distance spindle center to table 5500 mm max. table load 250 kg grinding wheel speeds 1.900 U/min longitudinal feed 680 mm cross travel 245 mm control STÖCKEL - ST-2 Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. A machine video will be shared on request. Fedpfx Aou Rt Tqodrepk Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST

Condition: used, STÖCKEL FNX 640 ST-2 is a NC Surface grinder, engineered for precision, high accuracy and reliability. Capacities: grinding length 600 mm, grinding width 400 mm, grinding height over table 530 mm; table speeds up to 35 m/min. Main technical specifications: grinding spindle motor 7.5 kW; voltage 50 Hz 3x 400 V; machine weight approx. 3600 kg; overall dimensions L 3000 × W 2500 × H 2300 mm. Delivers tight tolerances and is suited to applications in automotive, aerospace, machine tools, medical and watchmaking. Fjdpfxsyymbuj Adrjpk

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 350007, feed rate Y-axis: 2 m/min, table length: 1,200 mm, table load: 1,500 kg, table width: 800 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obliges you to arrange collection within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Table length: 1,200 mm Table width: 800 mm Table longitudinal travel: 1,300 mm Table load capacity: 1,500 kg Table feed rate: 3–25 m/min Y-axis Movements Adjustable feed speed: up to 2,000 mm/min Adjustable depth of cut: 0.001–0.030 mm Fine adjustment: 0.001 mm via electronic handwheel Z-axis Adjustable cross feed: up to 2,000 mm/min Maximum cross travel: 800 mm Fine adjustment: 0.001 mm via electronic handwheel Magnet dimensions: 1,200 x 750 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 7,000 x 2,400 x 2,600 mm Weight: 14,000 kg EQUIPMENT Linear guides on Y-axis Electronic handwheel for fine adjustment Hydraulic external table drive Grinding wheels Fjdjxm R Dkepfx Adrjpk

Condition: used, grinding length 1350 mm grinding width 660 mm Fsdpfxjyqv Nbj Adropk workpiece height 522 mm control mit Steuerung surface area 1500x750 mm grinding wheel size 350x60 mm turning speeds 1500 U/min power capacity 11 kW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, GMN TSE 100cg-12000 / 1.25 high-speed spindle, serial number: R367004, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fpodpei D U U Nefx Adrok

Condition: new, GMN TSE 100cg-12000 / 1.25 high-speed spindle, serial number: R367002, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fpedpfxji D U U Ej Adrsk

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle, serial number 281117, unused in original packaging, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fpodpji Eab Sjfx Adrjk

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle, serial no. 287832, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Fpsdpfx Adoi Eacajrek

Condition: new, GMN TSE 80-16000 / 1.2 high-speed spindle SP: 10-12000 :384568, unused in opened original packaging, 100% functional, scope of delivery as per photos Fedomq H T Hspfx Adrepk

Condition: used, Year of construction: 2008, machine/vehicle number: AT88, Used Tetra Pak Sterilizer + Homogenizer 12000 l/hThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h processes liquid food products through thermal treatment and homogenization, ensuring high safety and quality standards in industrial production. Since it combines a UHT sterilization system with a high-pressure homogenizer, it delivers optimal processing for various food and beverage applications. Moreover, its design allows easy integration into existing production lines, making it a practical choice for manufacturers.General FeaturesThis system operates at a capacity of 12,000 liters per hour (l/h), providing both high performance and consistent results in thermal treatment and particle size reduction. Tetra Pak, a leading brand in food processing technology, manufactured this unit in 2008, ensuring a balance between proven reliability and advanced engineering. Furthermore, the system’s robust construction guarantees long-term durability, reducing the need for frequent maintenance.Tetra Pak Steritube UHT SterilizerThe Tetra Pak Steritube UHT sterilization unit applies high temperatures to ensure the microbiological stability of liquid products. Because it features a controlled heating system, it keeps the sterilization temperature between 95°C and 138°C, depending on production requirements. In addition, operators can adjust the holding time at multiple levels, choosing between 5, 10, 15 seconds for initial stages and 30, 45, 60 seconds for advanced stages, allowing precise thermal treatment control.To optimize heat transfer, the system regulates hot water flow between 10,500 and 32,000 l/h, ensuring uniform sterilization. As a result, the unit maintains an inlet temperature of 5°C and an outlet temperature between 85°C and 95°C, which provides controlled cooling before further processing. Another key advantage is that its design allows seamless integration with homogenization systems, CIP (Cleaning-in-Place) units, and aseptic packaging lines.Tetra Pak Alex 30 HomogenizerThe Tetra Pak Alex 30 homogenizer operates at pressures up to 250 bar, effectively reducing particle size and improving product stability. Because it processes between 6,000 and 14,000 l/h, it is ideal for enhancing the consistency and quality of UHT-treated liquid products.Additionally, the system features cone valves and pistons made of stainless steel or solid ceramic, ensuring durability and resistance to wear. It also includes grooved and V-type seals, which provide effective sealing and reduce maintenance needs. Since the homogenization process occurs in two stages, the system ensures maximum efficiency. The first stage applies 42% of the pressure, while the second stage handles the remaining 58%, both controlled electronically via VDC signals.Moreover, an ABB M3BP315SMB 4 motor powers the unit with 132 kW output, operating at 380V and 50 Hz, which guarantees reliability and high performance. At the same time, a 7.5V DC thermistor monitors the operating temperature to prevent potential malfunctions. For enhanced safety, the system includes a 24V DC door safety lock and a crankshaft speed sensor to prevent overloads.ConclusionThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h offers an efficient solution for thermal processing and homogenization of liquid food products. Thanks to its high performance and reliable construction, manufacturers can optimize their... Fpsdpfxev Di Ito Adrjk

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Fpedpfx Aszgv Uusdrjk Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Fedpfxezqdibo Adropk Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Fpedpfowxdrbsx Adrok Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Fjdpfx Adozinansropk Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Fpsdpfx Adoy Hqwyjrsk Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm Fpodpotrya Rjfx Adrjk TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m Fpodoyrrwkepfx Adrok

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Fpedpfx Ajzkanyedrjk Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), Year of construction: 2006, 45 linear meters of SSI Schäfer Palflex pallet racking, including shelf inserts Used item, in good condition, see photos Year of manufacture 2006 Height approx. 6.5 m Depth 120 cm Field load 12,000 kg Frame galvanized Beams red Shelf inserts included! 2 pieces of grating per 2.7-meter beam length Negotiable price: €7,490.00 net ex warehouse Offer includes: + 17 units of frames, pre-assembled, depth 120 cm, height approx. 6.5 m + 96 units of beams, length 2.7 m, 1500 kg load capacity per shelf with evenly distributed load + 192 units of safety locks + 96 units of galvanized shelf inserts for 48 levels, each 2.7 meters beam length + 68 units of concrete anchors + Load signs Item is in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30-50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND CORE BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service: Fsdpfx Adokx E Ryoropk 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission-based auction: Conducting auctions on commission. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Year of construction: 2006, 70 linear meters of SSI Schäfer Palflex pallet racking, including infill grating Used, in good condition, see pictures Year of manufacture: 2006 Height: 4 m Depth: 120 cm Field load: 12000 kg Frame: galvanized Beams: red Infill grating included! 2 pieces of grating per 2.7-meter beam length Negotiable price: €8,290 net ex works The offer includes: + 26 units of pre-assembled frames, depth 120 cm, height approx. 4 m + 100 units of beams, length 2.7 m, 1500 kg load capacity per bay with evenly distributed load + 200 units of safety locks + 100 units of galvanized infill grating for 50 levels, each 2.7 meters in beam length + 104 units of concrete anchors + Load capacity signs Goods are in stock. Transport and assembly possible upon request. Fpsdpekx E I Nefx Adrek Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex works) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel construction mezzanines immediately available • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including a complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods release, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for a galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), 1 x Deighton dual lane burger/patty former (2) Type: D-12000 Located in Melksham, Wiltshire Fpjdpfxszr H N To Adrsk

Condition: good (used), 1 x Deighton dual lane burger/patty former (1) Fpodpfx Aezr H Nyodrek Type: D-12000 Located in Melksham, Wiltshire