Used Standard Industrie Ed 1,5 G for sale (65,794)

Condition: good (used), Potentiometer, dual potentiometer, regulator, controller, level regulator, control Manufacturer: Elvo, Regulator Controller -Type: COF2AC -Voltage: 115-230 V 50-60 Hz -Number: 2x controllers available Kedpfxoxyf Iws Aayodk Price: per piece -Dimensions: 265/160/H90 mm -Weight: 1 kg/pc.

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame Kjdpjh Alh Hsfx Aayodk 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls Kdjdpfeh Alh Rsx Aayok - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400 Technical specifications: - Steel frame - Two rolls direct driven by a gear system - Rolls are hardened - Rolls shafts are special steel material hardened and ground - Roll shafts housed by bearings - Standard rolls - Guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working   EURO 600,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   PK 35 file TypeSizeMin. DiaNotes160x10         40x10500         400Standard Rolls2100x15         60x10450         350Standard Rolls335x35         20x20900         300Standard Rolls4Ø 35         Ø 30600         400Optional Rolls5Ø 70x2         Ø 30x21000         500Optional Rolls62”x2,9         1”x2,31000         350Optional Rolls7 70x30x2         50x40x31200         1200Optional Rolls8 50x3         40x31700         600Optional Rolls9 50x50x5         40x40x5800         600Optional Rolls1050x50x6         30x30x31000         500Optional Rolls1160x7         30x4 700         400Standard Rolls1260x7         30x4800         500Standard Rolls1360x7         30x4 700         500 Standard Rolls14UPN 80         UPN 301000         500Optional Rolls*15UPN 80         UPN 301200         800Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment Kdodpfx Aed Eqqweaysk         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Shaft diameter: 580working speed: 2-5motor power: 30length: 3000width: 2310heigth: 3100weight approx.: 16500 Technical specifications: Kedpfx Aajh Alh Ueyodk - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal  working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, Year of construction: 2024, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices Kdedpewh Rlgefx Aayek - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Kdedpfx Aajwdiu Eeyek Y=2000mm Z=1000mm Table 2000 x 1800 mm, 12 Ton Cooling through spindle. X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Rotary table size 1,800 x 2,000 mm Table load 12 tons C-axes 360,000°

Condition: good (used), Polar Mohr 92 ED Paper Cutting Guillotine This machine has been serviced and is ready to use. This is the most respected guillotine brand, a flagship product. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with color display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables. Knife change via the control panel Weight: 1890kg 380V power supply Includes documentation, a tool kit, a safety knife change tool, a tapping block, a spare knife, and one machine knife. Kdedeyur Hdopfx Aaysk

Condition: good (used), Polar Mohr 78 ED Paper Guillotine Very low mileage, very good condition. The machine was purchased from a school workshop and has not been used in production. Technical specifications: Cutting width: 780mm Stack height: 120mm Color LCD display Power supply: 400V Weight: 1400kg Kodsynfwiopfx Aayjdk Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Spare knife, cutting sticks, tapping block, and operating tools.

Condition: excellent (used), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, FPT PRAGMA M 60 Kdodpjyycibefx Aaysk CNC SELCA 4045 Automatic continuous head, 5000 rpm 2.5° automatic head with electrospindle 18 kW – 18,000 rpm Stolle table 7000 x 2000 x H 300

Year of construction: 2005, condition: used, CNC Machining Center 4 Axes – FOM (Aluminium/Steel Profiles) Configuration: 4-axis CNC Working length (X): 7,030 mm Condition: Working, maintained - Main Features CNC machining center designed for drilling and milling operations on aluminium and steel profiles, ideal for window and industrial profile production. 4-axis spindle (0° / 90° / 180°) for multi-side machining Electrospindle 4 kW – up to 12,000 rpm Tool holder: ISO 30 DIN 69871 6-position automatic tool magazine 6 pneumatic clamps (manual positioning) THK linear guides for high precision - Control & Software Software: FomCam + Prof2 (Windows XP) Easy programming with automatic CNC generation Movable control console (PC + display + keyboard) Barcode reader connection Remote control capability 📏 Technical Data X-axis: 7,030 mm Y-axis: 1,100 mm Kdjdpfx Aaeywhf Noysk Z-axis: 425 mm Machine dimensions: 8,307 x 1,875 x 2,460 mm Weight: 3,200 kg - Equipment Forced air spindle cooling Inverter-controlled spindle Automatic lubrication Protected tool magazine with rotary system - Machine ready to work, ideal for aluminium profile machining and window production.

Condition: ready for operation (used), Siemens 1LE10010EA422FB4 1.5kW low-voltage motor Serial number: E1603/819088 24, used, in good condition, 100% functional, delivery as shown in photos. Ksdpfx Asx Dvrzsaysdk

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Kedpfxeuni D Ej Aayedk Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, machine/vehicle number: 580P090100, Wire feed unit for manual TIG welding TBi PenFeeder wire feed unit Wire feed speed Suitable wires Wire feed length Wire spool mount Dimensions Weight Power supply Control adjustable from 0.5–10 m/min 0.8–1.6 mm, all wire types TBi WirePen with 3 m length Mandrel diameter 50 mm for standard D300 wire spools and basket spool holders approx. 656 x 271 x 442 mm approx. 11 kg (without wire spool) 115~230 V AC, 50~60 Hz On/Off via TBi WirePen, selectable 2-stroke or 4-stroke operation Kdodpfxjx Ux Ezj Aayok Purpose The TBi PenFeeder helps make manual TIG welding more efficient and faster. The filler wire is available virtually endlessly at the touch of a button, eliminating welding pauses for repositioning or changing rods. Using filler material from a spool also saves costs. Even less experienced TIG welders can achieve good results quickly with this system.

Condition: ready for operation (used), Stäubli TX90 industrial robot arm SN:F04/50Y0A1/A/01 with CS8 C complete control and operating panel,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kdedpjxah I Hefx Aayek

Condition: new, Year of construction: 2024, SCHORR electric low lift pallet truck model RR15NHE for loads of up to 1,500 kg -- Low-maintenance and smooth-running -- Includes 2x 12V 75Ah lead-gel battery -- Integrated charger (230V) -- Polyurethane tires: Durable and abrasion-resistant -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! SCHORR ELECTRIC PALLET TRUCK 1500KG The SCHORR electric low lift pallet truck has a load capacity of 1500kg. The forks have a length of 1150mm and are therefore ideal for one-way pallets and Euro pallets. The speed can be controlled steplessly with both hands using a toggle switch on the tiller. When the toggle switch is released, the pallet truck brakes automatically. The pallet truck travels at a maximum speed of 4.5 km/h. The Euro pallet / load is also lifted by pressing a button on the tiller. The built-in 2x 12V gel batteries with a capacity of 75Ah are maintenance-free. Charging the battery is extremely easy thanks to the integrated charger. You can charge the pallet truck directly at a conventional 230V socket. The low lift pallet truck can be operated intuitively using the built-in tiller. The control instruments such as the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. The SCHORR low lift pallet truck also has various travel programs. In addition to the normal transport speed of approx. 4.5 km/h, there is also a "creep mode", which allows you to control the pallet truck very precisely and safely. This makes the SCHORR electronic pallet truck perfect for use on trucks as well as in warehouses. TECHNICAL DATA: Load capacity: max. 1500kg width: 560mm length: 1624mm Height: 1174mm Size of the drive wheels: 210mm Turning circle: 1440mm Weight incl. battery: 230kg 2x 12V 75Ah lead-gel battery Kedpfx Aomv Eh Eoaysdk Whether you want to have the pallet truck delivered or pick it up from us on site in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and inspections as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, mileage: 1,65,020 km, power: 315 kW (428.28 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, loading space length: 6,300 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: * Sliding tarpaulins on the right and left * Edscha roof * BÄR 1500 kg load capacity * Active Brake Assist 5 * Stability Control Assist * Fatigue Assist * Lane Keeping Assist * Turning Assist * Front axle load 8.0 t * Right exterior mirror with maneuvering position * Standard and DuoMatic brake connection * 12-speed transmission - Type: G 211-12 Power Shift * Manual tilting roof * Fuel tank: 390 L aluminum, left * Roof air deflector (lockable) * Reinforced engine brake * Wheelbase variant 4900 mm * Frame overhang 2400 mm * Smoker's package * Rain sensor Kdsdpfx Aev Tf T Rsayek * Acoustic reversing alarm and hazard warning lights * Tail lift switch * Fleet management system interface * Driver's seat with comfort suspension seat * Exterior sun visor * Exterior storage flap on the left * Power socket 24V / 15A in storage compartment on the right side wall * Additional 24V socket in the passenger footwell * Automatic daytime running lights * Sleeping cabin curtain Additional equipment: * EURO 6 emissions standard * Storage compartment above the windshield with cover * L-shaped cab * Heated approach/front mirrors * Trailer brake with 2-wire connection, left connections * 24V / 15-pin trailer socket * Exhaust to the right outside * Equipment package: Powertrain 2 * 220 Ah battery * Batteries arranged side by side * Cockpit Multimedia * Rear axle differential lock * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic activation of headlights (light sensor) * Driver assistance system: Attention Assist (drowsiness detection sensor) * Driver assistance system: Autonomous Emergency Braking (Active Brake Assist 5) * Driver assistance system: Lane Keeping Assist * Driver cab: Chrome interior package * Cab: Hydraulic tilting system * Cab: L 2.30 m, tunnel 320 mm * Cab: Steel suspension, comfort * LED clearance lights * Suspension: Air/air (fully air) * Electric windows * Tinted windshield * 100 A regulated generator * Speed limiter system * Urea tank (AdBlue): 60 liters * Rear axle with active lubrication * Comfort bed below * Comfort locking system * Electronically controlled power steering pump * Multifunction steering wheel * Heated air dryer * Engine 10.7 liters - 315 kW R6 Diesel (OM 470) * Engine variant OM 470 * Ramp mirrors * Disc brakes front and rear axle * Key with remote control * Flashing LED side marker lights * Seats in cab: Passenger seat * Driver's seat backrest foldable * Front splash guard * Stabilizer Front axle * Storage compartments with lids behind the driver and passenger seats * 12V socket in the passenger footwell * Tachograph / EC control unit * Truck Data Center 7 (fleet management system) * Aerodynamically shaped underbody paneling * Front underride protection * CB radio preparation * Toll collection preparation * Offset front axle * Gross vehicle weight 18.00 t * Auxiliary heating (water) * and much more * This offer does not include the trailer shown. * Subject to errors and prior sale. * In addition to the truck. * Trailer registered July 2020. * Maximum gross vehicle weight 13,500 kg. * Loading capacity 7,500 x 2,480 x 2,500 mm. * Sliding tarpaulins on the right and left. * BÄR 1.5t LBW, aluminum plate. * Drum brakes. * Air suspension. * Wheelbase 1,600 mm. * Extra batteries for operating the LBW. * Folding rear outriggers. * Outriggers on the drawbar. * 40 mm drawbar eye. * Tires: 285/70R19.5, 8-9 mm, spare tire 15 mm. * Price €18,900 net plus VAT.

Condition: excellent (used), Buderus G 605 low temperature boiler 1020 kW Kdjdpjwynuijfx Aaysk

Year of construction: 2017, condition: excellent (used), functionality: fully functional, FOM Industrie ARGO 70 3-axis CNC machining center for drilling and milling operations on steel or aluminum profiles. Kedpolu E Najfx Aaysdk TECHNICAL DETAILS X-axis top only: 6.780 mm X axis top + heads: 6.630 mm Y and Z axis for machining on top and rear side: 545 mm x 295 mm Y and Z axis for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180°. Rotational speed: max. 17.000 rpm profile width: max. 545 mm bar length: max. 6.780 mm Number of milling spindles for aluminum: 1 tool change places: 12 POSITIONING AND CLAMPING Clamping devices with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. Number of clamps: 8 MACHINE DETAILS main motor: 6,5 kW total power 8,3 kW speed axis X: 100 m/min EQUIPMENT - Multiple workpiece - Tool clamping system - pendulum operation - Minimum quantity lubrication - Chip discharge conveyor - Rigid tapping - Air cooling - Tool holder - Tool rest with 12 places at the head - Operator terminal with PC - 23" screen - 3D visualization for FomCam

Condition: new, Year of construction: 2025, steam boiler 16.000 kg x 26 bar steam boiler 12.000 kg x 16 or 26 bar new type: VKK Standard equipped and fixed by Hagelschuer with or without Economizer 3 pass boiler production according DIN 12953 available immediately - additional equipment like the burner and other sizes or capacities available Kdjdpfx Aajpky Dxeysk

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Kdjdpfsxhfqnex Aayjk Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser Cutting Machine with 1500 W Fiber Laser "Ecoline" Our goal is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed library of cutting parameters is included, along with first-class service. Please also take note of our attractive leasing and hire-purchase options. The most cost-effective entry into laser cutting technology - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approx. 3.0 x 3.0 meters installation space - Top quality; book your viewing appointment now! Cutting capacities: - Steel sheet up to 15 mm - Stainless steel up to 6 mm - Aluminum sheet up to 5 mm - Travel range approx. 1300 x 1300 mm - Table size approx. 1300 x 2500 mm (suitable for a full mid-format sheet) - Machine control in German - Manual front door - Comprehensive collision protection features - Large front window for monitoring the cutting process - Automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter files - Includes nesting module - CypCut1000 cutting software - Raytools 240 cutting head - Very user-friendly operation - High-performance laser chiller Sales are exclusively to commercial customers. Delivery/Consultation/Sales only in Germany, Austria, and Switzerland. Machine dimensions approx.: Width: 3.2 m Ksdpfx Aeitu Srsaysdk Height: 2.3 m Length: 3.3 m Total weight: approx. 2800 kg Need a different laser power, table shape, or table size? No problem. I am happy to provide a custom quote. Not sure which laser power is right for your application? Of course, I can carry out cutting tests tailored to your requirements. Many options are available—from 0.5 kW up to 20 kW laser power.

Condition: used, mileage: 9,46,010 km, power: 265 kW (360.30 HP), first registration: 10/2012, fuel type: diesel, number of seats: 63, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, +++3x electric roof-mounted air conditioning units+++ +++Transmission fails to engage when warm+++ +++Limited drivability+++ General Information: * Engine: MAN * Emission standard: EURO 5 * Transmission: Automatic * Total seats: 63 * Seats: 60+2+1 high/fixed * Standing places: 81 Safety: * Retarder * ABS * ASR * EBS * Fog lights Passenger Area: * Auxiliary heater * Air conditioning * Driver microphone * Stroller space * Wheelchair ramp * Wheelchair space * Stop request button Exterior: * Destination display (matrix) Kodpfsxdgh Hox Aayjdk * Matrix manufacturer: Lawo * Number of double-width doors: 3 * Kneeling system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof fans * Roof ventilator Other: * German registration certificate * Twin tyres * Vehicle dimensions: Length 17.98 m, Width 2.5 m, Height 2.98 m * Tyres: Front approx. 30 %, Middle approx. 30 %, Rear approx. 70 % Our internal vehicle number: 11778 Errors excepted. Images and text may differ from the actual vehicle. Over 300 vehicles available at all times.

Condition: used, Year of construction: 2008, operating hours: 10,526 h, 2008 | Hitachi ZX350LC-3 with standard earth boom and long-front boom | Used Demolition Excavator | 10526 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 72800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 50 approved ✅ 13 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Some small repairs to be anticipated, maintenance followed with complete history: handlers, numerous hoses, seals, belts... An excavation boom and a long demolition arm approximately 14 m in length. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40542 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Kdodoy Azpxspfx Aayek ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,204 mm, total width: 2,098 mm, total height: 2,330 mm, loading space length: 2,700 mm, loading space width: 2,040 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Volkswagen Crafter 35 “new 2025 model” Double Cab Flatbed, Medium Wheelbase 3640mm, 3,500kg Gross Vehicle Weight, 2.0 TDI 103kW/140HP, 6-speed manual gearbox, front-wheel drive in Candy White, 7-seater, available immediately German list price: €64,558 incl. VAT Kdodpfxoxgabfe Aayek * 5 years factory warranty up to 200,000 km * Flatbed internal dimensions: 2,700mm x 2,040mm * 7 seats * Driver’s Comfort Plus seat and double passenger seat with storage compartment, folding backrest as table / 4-seat bench in the second row * Heated driver and outer passenger seats * Flatbed floor, aluminium drop sides (foldable), lashing rings, access steps (rear on tailgate) * Galvanised bulkhead grill * Climatic air conditioning with manual controls in cab * LED headlights with LED daytime running lamps * Fixed tow bar with 2,800kg trailer load * PDC parking sensors front and rear * Basic assistance package incl. Intelligent Speed Assist and cruise control * Hill start assist * Spare wheel (steel rim) with road tyres, tool kit and jack * Seat belt warning system front (visual and acoustic) and rear (visual) * Lockable, illuminated glove compartment * Rear wall with window – auto-dimming interior mirror * Infotainment system with 26 cm (10.4") colour touchscreen, 4 speakers, 2 USB-C data/charging ports (centre console) with enhanced charging performance and 2 USB-C charging ports (centre, windscreen), Wired & Wireless App Connect (AppleCarplay, MirrorLink, Android Auto) * Traffic sign recognition * Comfort Bluetooth hands-free system * Digital cockpit * On-board computer with attention and drowsiness detection * Rubber flooring in cab * Side marker lights * Electrically adjustable and heated exterior mirrors * Front bumper in grey with vehicle colour trim * Central locking with remote control and interior operation * Multifunction steering wheel * Central locking “Keyless-Go” without SafeLock * Front Assist with warning and braking for vehicles, pedestrians and cyclists * Light and visibility package incl. light/rain sensor / daytime running lights with assist and automatic coming/leaving home function * Lane keeping assistant “Lane Assist” * 1 wheel chock * Tyre pressure monitoring system * Storage package 2 Additional features: Driver and passenger airbags with passenger airbag deactivation, automatic headlight operation, left and right convex exterior mirrors, integrated LED turn signals in exterior mirrors, twin headlights, dual-tone horn, electric front windows, laminated windscreen, 2 folding radio keys, A-pillar grab handles, lockable glove compartment, LED interior lights in cab, flatbed double cab body, 75-litre fuel tank, radiator grille with upper chrome strip, height and reach adjustable steering column, headlight range adjustment, truck registration, engine 2.0L - 103kW TDI, rear fog light, emergency call system, wheelbase 3640mm, low-emission to Euro 6d, SCR (AdBlue technology), electro-mechanical power steering, fabric seat upholstery, start/stop system, front bumper in grey, heat-insulating glazing, permitted gross vehicle weight 3.5t Financing, leasing and trade-in possible. Affordable installation of accessories and special equipment available (all price examples incl. installation and VAT).