Used Suez Water Technologies & Solutions Mk-3 for sale (78,825)

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. Fsdpfx Aaowy Uu Aj Nepg • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled.

Condition: used, Year of construction: 2021, machine/vehicle number: 70602008, High-performance industrial vacuum evaporator designed for the treatment and volume reduction of industrial wastewater and process liquids. This system uses heat pump technology combined with vacuum evaporation to achieve efficient distillation at low temperatures. Technical Specifications:Capacity (distillate production): approx. 12,000 – 12,700 L / 24 h Technology: Heat pump vacuum evaporation Operating mode: Fully automatic continuous operation with PLC control (Siemens) Refrigerant: R134a Installed power: approx. 114 kW Operating temperature: 35 – 45 °C Distillate temperature: 37 – 47 °C Concentrate temperature: 35 – 45 °C Fodpfeyu Sfaex Aa Nopg Operating pressure: 6 – 8 kPa (vacuum) Dimensions and Weight Total length: approx. 5600 mm Total width: approx. 1500 mm Total height: approx. 3800 mm Weight: approx. 4,000 – 5,000 kg Condition: Used – very low operating hours. EVALED AC R 6 (vacuum evaporator / crystallizer “R” scraped type) is about 6 t/day class. Veolia EVALED AC R6 FF3 Vacuum Evaporator / Crystallizer – Wastewater Treatment

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, total length: 13,000 mm, total width: 5,650 mm, total height: 3,300 mm, input current: 10 A, input frequency: 50 Hz, Industrial Spiral Bread Cooler An industrial spiral bread cooler is available, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. The spiral has a total length of approximately 420 meters and ensures uniform cooling of the products. The dwell time for a complete cycle is approximately 94 minutes, enabling an efficient cooling process after baking. The system has a throughput of around 2,500 loaves per hour and can simultaneously accommodate up to 4,000 loaves with a total weight of approximately 2,566 kg. The design allows for configuration as a single or dual spiral (figure-eight type), depending on production requirements. It is suitable for integration into existing bread and bakery product lines. Main specifications: - Outer diameter: approx. 5.65 m (per loop) - Height: approx. 3.30 m - Required floor space: approx. 12–13 m in length (depending on configuration) - Power supply: 400V AC / 24V DC - Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 Fpjdpfx Aey Au Inja Njg The machine is sold dismantled. All components are available. It was fully operational until dismantling and is in good technical condition. On-site inspection is possible by appointment. Additional information can be provided upon request.

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Fjdpfxsh Dxqvs Aa Njpg Inclusive pumps, Control and other accessories. Nice condition

Condition: used, This listing is for the Veolia/Elga PC1ANRXM2 Purelab Chorus The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Features: Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Fpodpfx Aasxv A Uaj Neg Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Year of construction: 2020, condition: excellent (used), machine/vehicle number: 101262, Porta Solutions MULTICENTER 3 SPINDLE Fpjdjvn T Daopfx Aa Nog 3 Spindle Machining Center Mfd. 2020 SN: 101262 Control: Fanuc Panel i Chip Conveyor

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Serial number: CS5653 Year of construction: 2010 Fpjdsv Tx Uzjpfx Aa Njg 230 V, 16 A Belt width: 680 mm and (6x) 320 mm Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2026, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, wheelbase: 9,190 mm, color: silver, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Notes = Coming soon; Pezzaioli New 3-Deck Livestock Trailer 95.4 m² - Water & Ventilation - Lifting Floors - Lifting Roof Model Year: 2026 - new 3 decks 95.4 m² Lifting floors Lifting roof Water & ventilation = Further Information = Availability Stock status: Expected soon Axle Configuration Fpjdsxx N R Topfx Aa Nog Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Left tire tread: 100%; Right tire tread: 100% Rear axle 2: Max. axle load: 9,000 kg; Right tire tread: 100% Rear axle 3: Lift axle; Max. axle load: 9,000 kg; Left tire tread: 100%; Right tire tread: 100% Weights Unladen weight: 13,500 kg Payload: 29,500 kg Gross vehicle weight: 43,000 kg Maintenance APK (Vehicle Inspection): New TÜV upon delivery Condition General condition: very good Technical condition: very good Visual condition: very good Financial Information Price: On request Identification Registration number: OV-29-YX Further Information Please contact VAEX The Truck Traders for further information.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 02/2008, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2008, Equipment: ABS, tail-lift, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tire size: 245/70R17.5 Axle brand: BPW Rear axle 1: twin tires; Max. axle load: 8,000 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 2: twin tires; Max. axle load: 8,000 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 3: twin tires; Max. axle load: 8,000 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: air suspension Weights Unladen weight: 12,600 kg Payload: 22,400 kg Gross vehicle weight: 35,000 kg Functional Fedpfx Aoy Irtfoa Nepg Tail lift: tailgate Condition Technical condition: good Visual condition: good

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Fpsdpfxsh Txlcs Aa Nog Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: excellent (used), mileage: 8,01,058 km, power: 315 kW (428.28 HP), first registration: 01/2006, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: other, total length: 10,240 mm, total width: 2,530 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2006, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, = Additional options and accessories = - DAB radio - High beam - Air-suspended seats - Panoramic roof - Radio/CD player - Sleeper cab - Sun visor - Pre-heating system = Notes = TRANSPORT TO ANTWERP €590 = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,580 cc Axle configuration Brakes: Disc brakes Front axle: Tyre size: 385/55 R22.5; Max. axle load: 7,500 kg; Suspension: parabolic springs Rear axle 1: Tyre size: 295/80 R22.5; Twin tyres; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Tyre size: 295/80 R22.5; Twin tyres; Lift axle; Max. axle load: 7,500 kg; Suspension: air suspension Weights Unladen weight: 14,764 kg Payload: 11,736 kg Gross vehicle weight: 26,500 kg Condition Technical condition: very good Optical condition: very good Fjdpfx Ajyvf Nnoa Nopg Identification Reference number: 80

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram Fpsdpfx Astywzqja Nsg 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Fsdji U Dxuopfx Aa Njpg Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: used, Year of construction: 1980, voltage 50 V frequency 50 Hz ampere 3,7 A 21882 Fsdpfx Aajx U A Sls Nepg speeds: 3 Dimensions (L/W/H) 800 x 800 x 2200 mm weight 380 kg

Condition: used, Tapping chucks, thread chucks, tapping chucks -with slip clutch -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg Fpsdpfeb Uhktox Aa Njg

Condition: good (used), Tool holder, milling holder, milling tool -Recording: MK3 -Length: 973 mm -extendable up to: 440 mm -Measurements see: drawing in the photos Fpoded Rz Dxjpfx Aa Neg -Weight: 11.1 kg

Condition: used, Boring power 32.0 mm bore capacity in cast iron 35.0 mm morse taper MK 3 spindle stroke 120 mm throat 260 mm column diameter 110 mm table: 515 x 355 mm turning speeds 80 - 1400 U/min total power requirement 0.7 / 1.3 kW weight 175 kg range L-W-H 750 x 520 x 1820 mm from a training workshop maintained condition (!!) Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 3x T-slots - Table height adjustment via hand crank - Front main switch - Connection cable including 16A plug Fjdpfx Aaexabp Ro Nopg * Machine link: ?machineno=1008-9103754

Condition: ready for operation (used), Year of construction: 1994, machine/vehicle number: 9314, functionality: fully functional, controller model: Beckhoff mit Addison DataBend, wall thickness: 3 mm, working length: 6,000 mm, workpiece diameter (max.): 76 mm, Equipment: CE marking, TECHNICAL DETAILS Max. diameter: 76 mm Max. wall thickness: 3 mm Max. bending length: 6,000 mm Fpjdpfx Ajx Rbf Noa Njg MACHINE DETAILS Control: Beckhoff with Addison DataBend Dimensions & Weight Dimensions (L x W x H): 8,000 mm x 2,000 mm x 2,000 mm Transport weight: 6,100 kg Transport packages: 1 EQUIPMENT incl. several mandrels and bending formers Documentation CE marking

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1354.18, functionality: fully functional, operating hours: 8,000 h, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 300 mm, operating speed: 60 mm/s, table width: 550 mm, table length: 400 mm, total height: 20,000 mm, overall weight: 2,500 kg, installation height: 500 mm, Technical data: Pressing force 30 t Stroke 300 mm Installation height 500 mm Fold-through hole in table 120 mm Front passage 550 mm Usable table depth 400 mm Usable table width 550 mm Speed from 60 mm/sec. Speed up to 180 mm/sec. Hydraulic oil tank capacity 400 l Drive power 7.5 kW External dimensions L x W x D 1200 x 2000 x 2600 mm Weight 2.5 t With - 2-hand release - light barrier - safety cage - Infinitely variable pressure control, preselection Fpjdpfx Aaetrd Ubj Nsg with digital display - Infinitely variable speed control - 8000 switch-on hours - CE marking - complies with UVV

Condition: excellent (used), Tapping attachment Type Efem MK 3 (28520) Shank diameter on tap 21 mm Automatic right - left run Total length 285 mm Fodpfx Aaot R S Ave Nepg Diameter 109 mm Weight 7.5 kg

Condition: excellent (used), Tapping chuck Make Efem Type GZ with MK 3 mounting Fedpfx Ajg Ny Nhsa Nepg equipped with dies M10 chuck can be dismantled weight 3,5 kg

Condition: used, mileage: 1,001 km, color: green, driver cabin: other, gearing type: other, loading space length: 4,200 mm, loading space width: 2,340 mm, loading space height: 500 mm, Vehicle location: Bovenden, pendulum flaps Fpedpfxei Rpftj Aa Nsg Body: 3-sided tipper body with aluminum drop sides ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, axle configuration: 3 axles, first registration: 01/2025, suspension: air, color: silver, Year of construction: 2025, Equipment: ABS, tail-lift, = Additional options and accessories = - Air suspension = Remarks = Pezzaioli New - 3-deck livestock transporter 100m² - Water & Ventilation - Lifting floors - Lifting roof - NEW 2025 Model year: 2025 3-deck livestock transporter Water & ventilation system Lifting floors Lifting roof New production = Further information = Suspension: Air suspension Rear axle 1: Alloy wheels; Left tire tread: 100%; Right tire tread: 100% Fsdevrwp Ijpfx Aa Nepg Rear axle 2: Alloy wheels; Left tire tread: 100%; Right tire tread: 100% Rear axle 3: Alloy wheels; Left tire tread: 100%; Right tire tread: 100% Gross vehicle weight: 420,000 kg General condition: Very good Technical condition: Very good Optical condition: Very good Contact VAEX The Truck Traders for more information.

Condition: new, Year of construction: 2025, DN SOLUTIONS PUMA GT3100L (12/2025) – Long Bed Model: PUMA GT3100L Year: 12 / 2025 Steady rest Chuck Size: 12 inch Max Turning Diameter: ~ Ø480 mm Max Turning Length: ~ 2,000 mm (long bed) Spindle Bore: 102 mm Spindle Speed: 3,000 rpm Main Motor Power: 26 kW Fedjy Hfh Hjpfx Aa Nopg Max Torque: ~ 735 Nm X Axis Rapid Traverse: 24 m/min Z Axis Rapid Traverse: 24 m/min Guideway Type: Box guideways Control Unit: Fanuc i Plus Turret: 12 station

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 6,00,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS Fpjdpfoy Rmwdex Aa Nog ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.