Used Test Bench For Gears for sale (21,684)

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Pgodorr Ammspfx Aphjr Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Pedey T Ulzjpfx Aphsgr Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,000 mm, total length: 2,500 mm, total height: 1,020 mm, Optical table Pgsdjzrfl Hopfx Apher Perforated plate made of stainless steel (11 cm) Frame: 80x82x155 cm (H x W x L)

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Pgsdpfozhkb Sex Aphjr Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), For sale is a solid, planed, and precision-ground metal layout and measuring table with a sturdy steel frame. The massive, machined work surface is ideally suited as a precise reference and work surface in mechanical engineering, toolmaking, mold making, quality assurance, as well as in locksmithing and metalworking. Due to its robust design, the table offers a very stable and durable work base. Features: * Solid metal plate * Planed / finely machined surface * Sturdy steel frame * Additional storage space in the frame * Very heavy and robust design * Lateral holes in the plate * Used, condition appropriate for its age Suitable for, among other things: * Layout work * Measuring and inspection work * Aligning and checking workpieces * Use with height gauges and dial indicators * Tool and fixture construction * Mechanical engineering and metalworking Psdpozwv Hxefx Aphsgr The surface shows signs of wear and tear due to age and use, but is overall in good used condition. Plate dimensions: Length: approx. 1000 mm Width: approx. 1000 mm Due to the massive and heavy design, only pickup is possible. An inspection is possible by appointment. The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors.

Condition: excellent (used), For sale is a professional measurement station, the Wentworth Laboratories MP-0900, designed for testing and performing measurements on semiconductor components, circuit boards, and microelectronics. The device is equipped with a Wild Heerbrugg Epizoom 1:5 stereoscopic microscope with smooth magnification adjustment and a precise, movable measuring table. The design also features color-coded measurement ports. Data from the nameplate: Manufacturer: Wentworth Laboratories, Inc. Model: MP-0900 Serial number: 123A Power supply: 230 V Frequency: 50 Hz Weight: approximately 34.6 kg Wild Heerbrugg microscope – manufactured in Switzerland Pjdpfx Apszu Tnzehjgr Used condition, with normal signs of wear visible in the photos.

Condition: excellent (used), functionality: fully functional, Granite measuring table Pedpfx Aexwp Icjphogr without height measuring device! Condition: very good (like new) With low-vibration base, ideal for precise measuring tasks in production and quality assurance. Dimensions: L/W/H 660 mm x 660 mm x 800 mm; thickness of the granite plate 160 mm.

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Psdpfoyl S Eujx Aphegr

Condition: good (used), Inspection table / Measuring table Manufacturer: STOLLE Tabletop dimensions: (mm) 3,000 x 3,000 x 350 Pjdpfxezwpucs Aphegr Accuracy class 1 Tolerance 0.04 mm Plate weight approx. 6,100 kg Equipped with 13 legs for leveling.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is engineered for automated crack detection on ring-shaped components, such as bearing races and gears, utilizing the eddyvisor C. In addition to crack testing, customers can inspect for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot manipulates and guides the sensor precisely along the contours of the test part. Testing is conducted using up to two probes. All relevant scanning parameters and communication protocols for controlling the eddyvisor C are integrated into the robot scanning program. At the heart of the system is the eddyvisor C, a two-channel eddy current instrument, ensuring highly reliable detection of cracks and grinding burns. Process automation is achieved by an integrated Stäubli TX2-60 robot. The entire system is managed and operated via a control cabinet equipped with an integrated control and operating panel. Pgedsyx E D Eepfx Aphsr A vertical spindle with chuck reliably clamps each test component during the inspection process. Non-conforming (NOK) parts identified during testing are automatically discharged to one of two designated NOK storage conveyors. Separate storage locations for reference and master parts facilitate calibration and ongoing quality assurance during operation. The system also incorporates the ibg Optical Reflection Sensor (iORS), enabling precise, non-contact inspection of rings.

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. Pgsdpstw S Awofx Aphsr 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: good (used), Siga Type: GS-517-400 External dimensions L x W x H: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAKKS standards and is therefore approved for tests relevant to type approval. Butane loading rate - Continuously adjustable from 5 g/h to 77 g/h Fuel loading rate Pedpfxezg Ex Ns Aphegr - Continuously adjustable from 5 g/h to 100 g/h Fuel temperature control - Continuously adjustable from 20°C to 50°C Gasoline quantity selectable - From 0 l to 8 l Selectable breakthrough criterion - From 1 g to 10 g Temperature of purge air flow - Continuously adjustable from 25°C to 30°C Precision scales for test specimen and reference AKF - Measuring range up to 6 kg, 0.1 g resolution Purge underpressure - Continuously adjustable from 0 hPa to 30 hPa Purge air flow - Continuously adjustable from 1 l/min to 60 l/min Humid purge air flow - Continuously adjustable from 10% RH to 85% RH Number of cycles from 1 to 999 (loading/purging) Condition: used Sale from our location! Scope of supply: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Pjdpfxjrtrzds Aphegr Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Pgodpfx Aezidz Ijphor Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA Pedjvxwxcspfx Aphjgr weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Pjdpszp E Dkofx Aphogr Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Determination of compressive strength Pedpfx Apsxb Nv Uohjgr

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Psdszimb Depfx Aphsgr Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Psdpfx Aeg Sxmfephjgr Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Pgedpfx Apezh U Rdjhsr Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Preliminary fuse 16 A Testing device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slider) 15 N Displacement force (manually operated slider) 10 N Other equipment: P4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer: 500 mm (full extension with automatic closing) Additional load: 500 N Drawer cabinet, lockable: 3 drawers The teach-in endurance test stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min Pgodpfxjukitxj Aphjr max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Pgedsy Uigcepfx Aphor Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown in the pictures Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, Pjdpfszkvvyjx Aphjgr TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Pgjdpfx Apey D T Susher Control Siemens 840D weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. Pgedjxmv H Repfx Apher - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!