Used Top Router for sale (8,929)

Condition: excellent (used), Year of construction: 2016, I sell the top router repair milling. Producer: Scanwir, Poland Iijdpfowyq Dmsx Agysh Model: FDN-01 Year: 2016 Assembled, ready for work. Avialable immediately. On stock.

Year of construction: 1978, condition: excellent (used), I sell the top router for copy milling Žičnica FPŽX 300/200, Made in Jugoslavia in Ljubljana, Slovenia. Isdpfxjd Nzfcj Agyjih

Year of construction: 2019, condition: new, GOMA GS-900 Router Manufacturer GOMA Model / type of the GS-900 machine Production year 2019 Machine category Router Location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Cost of delivery Customer cover Startup Type to be agreed Description Comments Value Data Spindle speed 9000 - 18000 rpm Two-speed engine 3.2 / 2.4 kW Head rotation +/- 45 ° Vertical table travel 150 mm Table dimensions 700 x 800; (700 x 1200) mm The GS-900 router is intended for processing solid wood and wood-based materials, i.e. chipboard, MDF, etc. Characteristic: - processing of solid wood and chipboard, - milling of grooves in plates, edge profiling according to a curvilinear route or a straight line, - remote control for working with templates extended from the table, - double bearings allow you to use the full engine power, - pneumatic smooth lowering of the spindle controlled by a pedal, - spindle tilt in the range of +/- 45 degrees. Machining of very short, very long, complex curved edges or other unusual work requires the use of special equipment necessary for safety reasons. This tooling must sufficiently cover the tool and guarantee reliable material guidance to prevent kickback or kicking. The headstock is tilted sideways manually; the vertical position is determined by the removable pin. In the table, coaxially with the tool, there is a retractable pin D = 10 mm. After extending and installing the bearing, it provides guidance for the template with the workpiece. Clamps that can be purchased at Lignum can be used to attach the item. The tool is mounted directly in the spindle. Combined with reinforced bearings, this allows high feed rates. ATTENTION!!! The purchase of tools lies with the buyer. Spindle lock yes Table Length 1200 Spindle length mm 700 Number of heads piece 1 Number of engines pcs. 1 Number of pistons pcs. 1 Number of Spindles pcs. 1 Maximum Working Length mm 2500mm Iodpfxsfbl Epe Agyeih Maximum Working Width mm 1200 Maximum cutting height mm 150mm The machine has CE marking yes Engine power kW 3.2 / 2.4 kW Supply voltage V 380 New machine yes Spindle speed rpm 9000/18000 Security Guards yes Full Operation and Maintenance Documentation yes Extraction connection mm yes 70 mm Table working surface mm x mm 1200x800 Noise Level Db 50 db Manual adjustment yes Very Good Condition yes Machine weight kg 500 Capacity m3 / h 1800 m3 / h Machining height mm 150 mm With noise suppression housing yes Other machines in the category Routers

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 05/22, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 45 mm, workpiece height (max.): 1,200 mm, number of slots in tool magazine: 12, actuation type: electric, Equipment: CE marking, documentation/manual, CNC MACHINING CENTER TOP PROXIMA – 6 SIDES, AUTOMATIC LOADING, DOWEL INSERTION, AND RETURN For sale: CNC machining center TOP PROXIMA, year 2022, designed for the automatic machining of furniture components and panels. Machine in very good condition, well-maintained, and currently installed in a production facility. It allows for drilling, milling, and automatic dowel/hardware insertion operations, with the possibility of machining the part on up to 6 sides. It features two independent work units, one for the main side and one for the back side, reducing handling and intermediate operations. Automatic loading and buffer stock. The machine incorporates an automatic loader that acts as a production buffer. Parts can be identified using a barcode reader/scanner, associating each part with its machining program. It can also be integrated into an automatic line, receiving parts directly from previous processes. Before machining, it incorporates an automatic system for checking and measuring part height. Main functions: Vertical and horizontal drilling. CNC milling. Machining of up to 6 sides. Front machining unit. Rear machining unit. Automatic tool change. Automatic dowel insertion. Dowel insertion on the X-axis. Automatic dowel feeding. The machine has various spindles, electro-spindles, and specific units for drilling, milling, and dowel insertion. Direct output or automatic return Once machined, the part can continue with direct output to the next process or automatically return to the beginning using the conveying system. The return system also incorporates a loader/accumulator, allowing for the storage of machined parts and functioning as an output buffer. The machine can operate independently or be integrated into an automated manufacturing line. Main data: Manufacturer: TOP Model: PROXIMA Year: 2022 Maximum part length: approx. 3,000 mm Processes: drilling, milling, and dowel insertion Machining: up to 6 sides Loading: automatic with storage/buffer Identification: barcode Part control: automatic height measurement Output: direct or automatic return Control: industrial CNC Safety: enclosed installation Condition: Iodpfsztkqdox Agyjih Machine in very good overall condition, well-maintained. Operating hours are not available on the control panel. Availability: Availability to be confirmed. The machine is currently installed, and its removal will depend on the implementation of the new production line. Disassembly and loading: Disassembly, loading, and transport are not included. These tasks must be carried out by an external, specialized company at the buyer's expense.

Year of construction: 2018, condition: ready for operation (used), Work piece handling system manufactured in 2018. This TOP Automazioni Top Loader ETL 10-75 has a total weight of 2500 kg. If you are looking to get high-quality handling capabilities, consider the TOP Automazioni Top Loader ETL 10-75 machine we have for sale. Contact us for further details. Iedpez Arkdsfx Agysih - Total Weight: 2500 kg

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Iijdpfxezp E T Ss Agyoh Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: good (used), Year of construction: 2016, FOR SALE CNC Lathe TOP TURN S20C – Year 2016 Brand: TOP TURN (Distributed by major machine tool networks) Model: S20C Year: 2016 CNC Control: FAGOR (User-friendly interface for teaching cycles and ISO programming) Technical Description This 2016 CNC lathe is a versatile machine, ideal for precision work in small to medium production batches. Its modern design offers excellent rigidity and very quick set-up, thanks to the Fagor control system. Capacity: - Swing over bed: 400 mm - Swing over carriage: 210 mm - Distance between centers: 1,000 mm - Bed width: 300 mm Spindle: - Spindle bore: 52 mm (Comfortable bar capacity) - Spindle speed: Up to 2,500 rpm - Spindle nose: Camlock D1-6 Included Equipment - FAGOR CNC: Color screen, cycle-assisted programming (ideal for operators used to conventional machines) - Turret: Automatic turret (electric/hydraulic) for fast and programmable tool changes - Chuck: Precision 3-jaw chuck (approx. 200 mm diameter) - Tailstock: CM4, robust Isdpjy Slttofx Agyjih - Safety: Fully enclosed machine with interlocked sliding doors, compliant with CE standards - Coolant system: Centralized with integrated chip tray Highlights - Recent (2016): Modern electronic and mechanical components, easy to source spare parts - Precision: High-precision ball screws on both axes - Compact: Small footprint relative to its machining capacity Weight and Dimensions - Dimensions: Approx. 2,400 x 1,400 x 1,700 mm - Weight: Approx. 1,800 kg

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle Iisdpfxsz Hc T Uo Agyoh 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Iiodpfx Aozmukuogyeh

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. Iodpfx Aexx R Nqegyoih - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. Iisdpfjykq T Ujx Agyeh In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. Iedpfx Agjykq D Hoyoih The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2020, condition: used, Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Ijdozzdyhopfx Agyeih

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: Isdpfxsxx Si Eo Agysih - In working condition

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Iedpfjyb Tw Rsx Agysih Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: used, Weighing station for the food industry The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Weighing scale / weighing station Indicator: Top Control colour touchscreen Construction: Stainless steel frame with weighing platform and product tray Isdsz Ndg Uopfx Agyoih

Year of construction: 2006, condition: ready for operation (used), TETRA PAK ESL GABLE TOP FILLING MACHINE FOR 1000/500/300 ml WITH TWIST CAP APPLICATOR TETRA REX TR22 FILLER YOM 2006 ESL UNIT INCLUDED Isdpfx Agoz E U Dveyjih CAPACITY 2800 CARTONS PER HOUR 13.300 RUNNING HOURS EXCELLENT TECHNICAL CONDITION

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Iijdpfx Agoxx Sclsyjh Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX Isdoxx Sfaepfx Agysih SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: repair required (used), Year of construction: 2019, functionality: not functional, machine/vehicle number: BB19076267, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Maximum Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually exchangeable, made from Vulkollan-type plastic to support high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar stabilization. - Remnant Handling: Provides rear extraction using a self-centering extractor or front ejection option. - Repositioning System: Optional rail system allows for up to 600 mm of axial or radial displacement for lathe maintenance. - Automation: Fully controlled by a PLC with brushless motor and digital pneumatic valves to manage speed and thrust. - Bar Storage: Single-level magazine with 235 mm bar capacity. Machine status: NOT WORKING # Set of guides and accessories for bar clamping included # Bearing set for the pusher head "Pusher head bar" included Iiodpfx Aexx Shusgyoh

Condition: good (used), functionality: fully functional, mileage: 17,300 km, power: 88.26 kW (120.00 HP), fuel type: diesel, empty load weight: 5,430 kg, overall weight: 10,500 kg, axle configuration: 4x4, fuel: diesel, Year of construction: 1986, Equipment: all wheel drive, TOP CONDITION Isdpfxsxm S Abo Agyoih

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Iisdpfxovi Eypo Agyoh Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Max. cut length 300 mm

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, operating hours: 5 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, total height: 1,600 mm, total length: 5,700 mm, total width: 1,200 mm, overall weight: 3,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used OTT Tornado Plus, professionally refurbished and inspected. Very good condition with a traceable history. The machine is fully functional and connected. A test run can be arranged at any time by appointment. Equipment: Fine milling cutter, radius, cleaning set (4-way spray system incl. scrubbing brushes), angle insertion aid, Zk.c – profile drawing blade R1 (incl. pneumatic adjustment for workpiece feeler rollers for workpieces with and without protective film), Zk.c – profile drawing blade R2, Zk.f – surface drawing blade, flush cutter, corner rounding AKF, surface drawing blade, forming pressure zone, edge processing unit, edge magazine, radius drawing blade Touch screen: 18.5", clear operation with powerful Beckhoff control Year of manufacture: 2011 Weight [kg]: 3000 Previous owner: 1 Availability: Short-term, by arrangement The Tornado+ is designed for high throughput: high feed rate with consistent edge quality, designed for multi-shift operation. It is therefore the machine for companies where the edge banding machine is the pacemaker of production, and downtime directly results in lost units. We will coordinate the equipment, units, and level of automation with you. Compact and versatile. Iijdpfjz Sq Edjx Agyeh The edge banding machine has been completely overhauled and revised by us. All tools, hoses, chain plates, etc. have been renewed. Fully functional machine.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: BM17115077, 🔧 Automatic Bar Feeder – Top Automazioni MA315SX For sale is a fully functional automatic bar feeder from Top Automazioni (Italy), designed for use with CNC lathes. 🏭 Manufacturer: Top Automazioni 📌 Model: MA315SX 📅 Year of manufacture: 2018 🔢 Serial number: BM17115077 ⚖️ Weight: approx. 500 kg ✅ CE compliant Iedpfx Aox Hgpfjgyeih ⚙️ Technical Specifications • Suited for bar material up to 3 meters in length • For bar diameters up to Ø 12 mm • Automatic and stable material feeding for serial production • Robust and proven construction by Top Automazioni 🔌 Machine Integration • The bar feeder was previously connected to a Tsugami CNC sliding headstock lathe • Machine interface and operation were fully functional up to removal ⚡ Electrical Data • Supply voltage: AC 230 V • Frequency: 50 / 60 Hz • Rated current: 7.8 A 🛠️ Condition • Used • Technically flawless / fully functional • Normal wear according to age and prior use 📍 Location • Stuttgart area, Germany 📦 Scope of Delivery • Bar feeder as illustrated • Sold as-is Inspection is possible by arrangement. Further technical information or customized options can be discussed upon serious inquiry.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, PIPE BENDING MACHINE WITH ERCOLINA MANDREL, MODEL TOP 030, THREE-PHASE, WITH MANDREL + ERCOLINA AUTOMATIC LOADER, MODEL 030 A3 H76 Machine in like-new condition, CE certified Minimum outer diameter: 10 mm Maximum outer diameter: 76 mm Maximum bending radius (CLR): 200 mm Minimum bending radius (CLR): 20 mm Maximum bending angle: 210° Installed power: 4.2 kW Tank capacity: 15 l hydraulic oil Noise level: 65 dB Dimensions (Length x Width x Height): 4000 x 950 x 1250 (3 m) Weight: 850 kg (3 m) FEATURES •FST closing system (Patented) with an auxiliary system for stabilizing the hydraulic pressure of the sliding carriage. •Display screen for digital visualization of the carriage’s forward movement (Y1 axis) and rotation (B axis). •External pressure gauges to facilitate system setup and closing pressure adjustment. •Variable bending speed up to 4 rpm. •3-meter mandrel bench. •Pneumatic spindle. Isdpfx Aez Nf Dcjgyeih