Used Transor Tcf Iii-2-210A/Kf for sale (79,548)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. Dwsdpozxn Nnjfx Aptob In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 13341-T, total width: 1,420 mm, total length: 1,576 mm, total height: 1,100 mm, overall weight: 2,000 kg, cooling capacity: 20 kW (27.19 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, Equipment: cooling unit, The system was taken out of service a year ago due to a switch to a centralized system. One year before decommissioning, all TCF elements were replaced. We can provide support for recommissioning. Technical data: - Total filter capacity approximately 210 l/min - Filter fineness approximately 3 μm nominal - Tank capacity approximately 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter columns - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system via a settling tank and scraper conveyor - In-line cooling via the return flow from the filter columns to the clean oil area via the plate heat exchanger, including flow control in the chilled water circuit - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 2 pcs. machine supply pump Dodpfx Aszxhcneptewb for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approximately 100 l/min - Delivery pressure: approximately 10 bar - Drive: 400V, 50Hz 2 pcs. drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approximately 30 l/min - Delivery pressure: approximately 6 bar - Drive: 400V, 50Hz 1 pcs. screwed plate heat exchanger with cooling control approximately 20kW Designed for cooling water 70 l/min, 13°C supply temperature.

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min - Filter fineness approx. 3 μm nominal Dwedpfxszk Ek Ts Aptob - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar - Drive: 400V, 50Hz, IE3

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Bobst Media III A 2 Matic – in good condition! Year of manufacture: 2000 4-point system Crashlock HHS ULT300 Dedpszxxg Defx Aptowb A wide range of attachments/elements are available for adjusting the machine. The machine can be viewed and tested during operation.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, No minimum price – guaranteed sale to the highest bidder! The offer includes only the robot without the enclosure! The enclosure can be purchased separately for an additional €3,500! TECHNICAL DETAILS Payload: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Dodpozvmm Tjfx Aptewb Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 MACHINE DETAILS Dimensions & Weight Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. Dedpszwn Tdofx Aptowb A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 400 mm A-axis: -170° to +170° Dwsdpfxszwmx Es Apteb X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Dwsdpfx Apoxw Uqvotob Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: used, Year of construction: 2015, Swiss-type CNC lathe TSUGAMI B0206E-III TECHNICAL SPECIFICATIONS: Dwsdszp D Uuspfx Aptob Year of manufacture: 2015 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate, X1 axis: 24,000 mm/min Rapid traverse rate, X2 axis: 24,000 mm/min Rapid traverse rate, Z1 axis: 32,000 mm/min Rapid traverse rate, Z2 axis: 32,000 mm/min Rapid traverse rate, Y1 axis: 15,000 mm/min Rapid traverse rate, Y2 axis: 15,000 mm/min Max. bar diameter: 20 mm Minimum spindle speed: 200 rpm Maximum spindle speed: 10,000 rpm C-axis resolution: 0.001° Spindle power: 3.7 kW Minimum counter-spindle speed: 200 rpm Maximum counter-spindle speed: 12,000 rpm C-axis resolution of the counter-spindle: 0.001° Counter-spindle power: 2.2 kW Number of positions in the front tool holder: 8 Number of positions in turret 1: 5 Number of driven positions in turret 1: 3 Speed of driven tools in turret 1: 8,000 rpm Number of positions for secondary machining: 8 Number of driven positions for secondary machining: 4 Speed of driven tools for secondary machining: 8,000 rpm Maximum cross-section of the tool holder: 12 x 12 mm Weight: 1,750 kg

Condition: used, Year of construction: 2001, TSUGAMI BS26-III with Iemca bar feeder Dwjdpfxozp Eddj Aptob Fanuc control Year 2001

Condition: good (used), Programming cart KP-Qume QVT52 III consisting of: Mobile PC Type: KP-Qume QVT52 III Screen diagonal 14" (35,5 cm) Picture tube flat, white phosphor Screen display 24 lines / 80 or 132 characters / 1 status line / 1 user line Character display - 80 characters: 14 x15 matrix in a 16 x 16 cell or 14 x 12 matrix in a 16 x 13 cell - 132 characters: 7 x15 matrix in a 10 x 16 cell or 7 x 12 matrix in a 10 x 13 cell Frame rate depending on character display: 78, 70 or 65 Hz Character sets 96 ASCII characters, 7Bit ISO. In QVT119+ emulation: IBM code page 437/850 Screen saver yes, adjustable times Memory depending on emulation 4 or 7 screen pages Keyboard New ASCII (N.A.), different languages, 20 + 1 function keys programmable Dsdpfx Aeivd Eaeptjwb Emulations Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces 2 Serial up to 38,4kB / 1x Host RS232, DB25 / 1x Printer RS232, DB9 / Data flow control: Xon/Xoff, DTR or none / Option: RS422 or Current Loop Data format 7 or 8 bit / even,odd or no parity / parity check on or off / 1 or 2 stop bits Transmission mode full or half duplex / block Printer interface 1x serial, RS232 DB 9 Power supply 95 - 264 VAC, 47 - 63 Hz Power consumption (max.) 24 W Other hardware Bosch disk reader FDS 514 Bosch PDV control unit Bosch Handheld HBG 2 incl. trolley and various data cables Item condition: used Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request!

Condition: used, mileage: 3,62,217 km, power: 120 kW (163.15 HP), first registration: 01/2021, Year of construction: 2021, DB Sprinter 316 CDI Kiesling refrigerated box van with side door, Thermo King C 450 refrigeration unit - 2 units available (280,265, 362,754 km) - In very good condition! • Engine: 2.1 L - 120 kW CDI catalytic converter • Low emissions according to Euro 6 emissions standard • 6-speed manual transmission • Air conditioning • Cruise control • Speed limiter 120 km/h • Brake assist • Electronic brake-force distribution (EBD) • Driving assistance system: Crosswind assist • Anti-slip regulation (ASR) • Mercedes-Benz emergency call system • Fuel tank: Main tank 71 liters • Truck registration • Acoustic package • Navigation system for MBUX multimedia system • Airbag, driver's side • Heat-insulating glass • Storage compartment above the windshield • Seats in the cab: Driver's seat adjustable • Seat cover/upholstery: Fabric • Safety belt system with warning system (driver's side) • Seats in the cab: Passenger double seat • USB port in the center below the dashboard (charging function only) • Charging package dashboard (USB ports and 12V socket) • Communication module (LTE) for digital services • Rear wall paneling • Steering wheel (steering column mechanically adjustable) • Exterior mirrors, electrically adjustable and heated, both sides • Outside temperature display • Headliner in the cab • Automatic activation for headlights • DAB tuner (digital radio reception) • MBUX multimedia system (7" touchscreen) • Passenger-optimized center console (without storage compartment in the center console on the right) • Terminal block for electrical connections (driver's seat base) • 1 DIN slot in the front below the dashboard, passenger side • Maintenance interval indicator Assyst Dodpfxjzfxnze Aptewb • Adaptive brake light • Headlight range adjustment • Side marker lights • Generator 200 A • Fleece battery 92 Ah • Front engine drive with support for additional refrigerant compressor • Fuel filter with water separator • Display for windshield washer fluid level • Towing eye, rear • Gross vehicle weight: 3,500 kg • Unladen weight: 2,590 kg • Payload: 910 kg • Wheelbase 3665 mm • Vehicle dimensions: 6,050 x 2,015 x 2,940 mm (L x W x H) • Suspension: Stabilization level II • Tires: 235/65 R16C • Tire tread: 6/7 / 3/3 KIESLING - Deep-freeze box van • Type: Cooler Flitzer • Internal dimensions: 3,310 x 1,850 x 1,900 mm (L x W x H) • Side door on the right • Rear portal doors • Floor: Diamond plate • Lashing rails on the left and right, in the center • Stop rails at the bottom • Rear steps THERMO KING refrigeration unit, type: C 450 MAX • Suitable for deep-freeze applications • MINUS 20° Celsius! • Refrigeration while driving and when stationary! • Temperature recorder - First owner! - German vehicle! - TÜV/AU (technical inspection/emission test) upon request and for an extra charge: new! Errors and prior sale excepted!

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 55062012, functionality: fully functional, suction capacity: 80,000 m³/h, filter area: 577 m², empty load weight: 9,900 kg, Equipment: CE marking, TECHNICAL DETAILS Djdoxcnthepfx Aptjwb Capacity: 80,000 m³/h Filtration area: 577 m² MACHINE DETAILS Unladen weight: 9,900 kg Transport packages: 1 EQUIPMENT Extraction system Fire extinguishing system Control cabinet included Shaker cleaning system CE marking present

Year of construction: 2016, condition: ready for operation (used), Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm. Dodpov T Aqgefx Aptowb

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Counter Spindle Yes Dwsdpfjzr U Auox Aptsb

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Dwedezun T Espfx Aptsb

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Air conditioning unit RIEDEL PC 315.21-NE-LAS Dsdpovxwytofx Aptswb Laser radiation within class 1 The machine was regularly serviced

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. Dedpfx Aowf Aftoptjwb 1. Headstock with chuck. 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions.

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) Djdszt Hmzjpfx Aptjwb • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, • paper and cardboard, • textiles, • cables, • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-2180-PPV-A-B-KF-SH LINEAR ACTUATOR Pressure: 2…8 bar. Good working condition. Please check out our other listings as well. Dwsdpetwqtbjfx Aptsb

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The positions of the rotating tools are: T01-02-03-04 / T22-23 / T34-35 - equipped with Iemca Boss 332E/32 new in 2006 - lot of collets / guide bushes - MSC-501 Control - the machine has always worked with oil. Dsdpfowpu Etjx Aptjwb

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm 67641340f13ce Dodperrzklofx Aptowb

Year of construction: 2021, condition: excellent (used), Latest model Tomra Odenberg Halo III optical grader. Perfect for sorting greens, misshapes, mechanical damage, surface blemishes and size outliers. Very low running hours, only used for a short time and then put in to dry storage. Rare opportunity - find another one as new as this. Dodpexvt Htjfx Aptswb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 21047A, spindle speed (min.): 10,000 rpm, turning length: 210 mm, overall weight: 2,050 kg, bar passage: 20 mm, equipped with Iemca Boss 338HD/32 barfeed new in 2017 – fixed and rotating bushing – evacuation of long pieces through the sub spindle + external apparatus – chip conveyor – some collets and guide bushings – Fanuc 32i-B Control. Dwodpfswt Th Ijx Aptjb

Condition: excellent (used), Year of construction: 2004, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex 200 MkIII • Control: Mazatrol PC Fusion 640 MT Pro • Year: 2004–06 • Serial No.: 169996 • Network: LAN connection • Condition: The machine is in very good technical condition and has been very well maintained. • Mainly used for machining aluminium and plastic. • Max. turning diameter: 530 mm • Max. turning length: 1,000 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 580 mm • Y-axis: 160 mm • Z-axis: 1,045 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW • C-axis: 360° full interpolation Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant B-axis • Angular range: -30° to -190° • Full indexing Tooling and Magazine • Tool magazine: 40 positions • Tool measuring arm: Yes • Tailstock: MT5 Auto • Chuck: Kitagawa B-210, 10-inch 3-jaw chuck • Collet chuck: SMW AUTOBLOK KSB-MB-A60 Dodpozwhdcefx Aptowb • Smartshift BASE quick coupling for robot • Parts catcher: Yes • Parts collector: Yes • Chip conveyor: Mayfran • Bar feeder: STC Super 65 Included Documentation • Photos of the machine • Video of the machine in operation • Service history (photo) • Manuals • Electrical diagrams • Complete machine manuals • Complete programming manuals • Complete maintenance manuals Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 1,000 mm length • 40 tool positions • Through-spindle coolant • Integrated robot interface (Smartshift BASE) • STC Super 65 bar feeder