Used Uwm Bf20 Vario for sale (688)

Condition: new, bore capacity in steel (diameter) 16 mm throat 185 mm bore stroke 50 mm 20 mm spindle taper MK 2 spindle diameter mm spindle turning speed range 100-1500 / 200-3000 U/min 175 mm 280 mm table surface area 500 x 180 mm connected load frequency 230 V total power requirement 0,85 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank Prodourznwspfx Abpea

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Pjdjzgci Sopfx Abpsra Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, table diameter 350 mm table load 100 Kg Pjdpfxjupw Nxe Abpera swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 80 - 1600 mm/min total power requirement 0,23 kW dimensions of the machine ca. 2 Stk. 0,45x,039x0,33 m Pedpfx Aeupxkkobpera

Condition: new, table diameter 450 mm table load 300 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 300 kg vertikal total power requirement 220 kW weight of the machine ca. 0,078 t dimensions of the machine ca. 0,66 x 0,45 x 0,48 m Pedpfoupxa Ssx Abpora

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min total power requirement 1,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, Pjdpjh D Svnjfx Abpsra 1x for flat material 1x for square material 1x for? - footswitch

Condition: new, bore capacity in steel (diameter) 40 mm throat 330 mm bore stroke 190 mm spindle taper MT 4 MK Prsdpfxjqwd A As Abpja table: 500 x 400 mm column diameter 140 mm turning speeds 90 - 1500 U/min total power requirement 2,2 kW weight of the machine ca. 435 kg. range L-W-H 570 x 930 x 2170 mm

Condition: new, table diameter 300 mm table load 50 Kg swivelling range 90 Grad Podefv Aztopfx Abpera turning speeds 1 - 12 stufenlos U/min table load capacity 50 kg vertikal total power requirement 0,22 kW weight of the machine ca. 0,036 t dimensions of the machine ca. 0,45 x 0,43 x 0,38 m

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap 320 mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 38 mm Psdpfehwavrox Abpera tailstock quill taper MT 3 connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools

Condition: new, table length 400 mm table width 400 mm table load 0,2 t table diameter 400 mm swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 100 kg. vertikal Predpfx Abjfv Azzspea total power requirement 220 kW weight of the machine ca. 0,065 t dimensions of the machine ca. 0,56 x 0,42 x 0,46 m

Condition: new, bore capacity in steel (diameter) 20 mm throat 195 mm bore stroke 80 mm boring spindle MK 2 Pedpfsiiq S Nsx Abpjra table surface area 320 x 300 mm total power requirement 0,75 kW weight of the machine ca. 0,072 t dimensions of the machine ca. 0,7 x 0,4 x 1,1 m

Condition: new, bore capacity in steel (diameter) 28 mm throat 320 mm bore stroke 150 mm spindle taper MT 3 MK table: 500 x 350 mm column diameter 105 mm turning speeds 75 - 3010 U/min total power requirement 0,9 / 1,2 kW Prodpfxsfhk Ufo Abpea weight of the machine ca. 235 kg. range L-W-H 1740 x 670 x 850 mm

Condition: new, table length 1300 mm table width 800 mm stroke height 1015 mm weight max. in kg 3000 kg 220 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m Podpfxevn Uzme Abpera The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, bore capacity in steel (diameter) 32 mm throat 257 mm bore stroke 115 mm boring spindle MK 4 boring chuck 16 mm bore depth 120 mm table surface area 475 x 425 mm Pjdpfefv H H Uex Abpora column diameter 92 mm total power requirement 1,1 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top

Condition: new, table length 2200 mm table width 1500 mm stroke height 1900 mm Predpfx Aevn U D Iebpoa weight max. in kg 3000 kg total power requirement 1,5 kW stroke speed - idle stroke upwards 55 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,650 t dimensions of the machine ca. 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, table length 2200 mm table width 1500 mm stroke height 1850 mm weight max. in kg 2000 kg 260 mm total power requirement 1,5 kW stroke speed - idle stroke upwards 40 sek. Pjdpfx Absupxwkjpera stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,45 t dimensions of the machine ca. 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Prsdpfx Aezbnl Aobpea Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Psdezw Ukcspfx Abpera Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2015, x-travel 570 mm y-travel 210 mm z-travel 365 mm turning speeds 50 - 6300 U/min spindle taper ISO 40 SK quill stroke 127 mm Podpjzv Ul Refx Abpora table: 915 x 200 mm table load 160 kg feed range 0,04/0,08/0,16 mm/min total power requirement 2,2 kW weight of the machine ca. 850 kg. range L-W-H 1350 x 1300 x 2010 mm Multifunctional drilling and milling machine for professional use. Stepless speed control. Features electronic speed control and a digital position displayâ??features that impress in terms of quality, performance, and price. Heavy-duty, solid construction made of high-quality Meehanite cast iron. All axes feature adjustable dovetail guides. Forward and reverse rotation. High concentricity accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Main power switch, forward/reverse switch, emergency stop pushbutton. Digital speed display. Height-adjustable protective screen with microswitch. Central lubrication for spindle, nut, and guides; milling heads can each be swiveled 90° to the left and right; spindle head carrier rotatable by ±90°; manual spindle brake; includes Digital Readout (DRO), digital 3-axis position display (Xâ??Yâ??Z) For measuring positions

Condition: new, saw blade diameter: 315 mm, – Saw blade 315 mm – Double miter cut – 2 speeds – Cooling system – Protective guard – Emergency stop Prodpfx Aozu Ilhjbpja – Documentation – 400V

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Kilia Bowl Cutter 50 Litres Meister Plus Vario with Hand and Knee Operation Condition: Factory reconditioned with 6 months warranty. The Kilia 50 litre Meister Plus Vario is a powerful universal high-speed bowl cutter for the production of fine and coarse sausage products as well as many other products. The machine impresses with its compact design, high-quality stainless steel construction and modern, infinitely variable drive technology for precise mixing and cutting. The machine is equipped with a 6-knife head, infinitely variable knife shaft drive with forward and reverse operation, infinitely variable bowl drive, electric knife shaft brake, temperature cut-off, revolution counter with automatic stop, central lubrication for the knife shaft and plate shaft bearings, as well as a 7-inch touch display as an alternative operating solution. In addition, the machine features hand control and knee control for particularly practical and ergonomic operation. The noise protection cover is included, and the knife cover is manually operated. An electric knife cover drive is optionally available. Technical Data: Bowl volume: 50 l Capacity: approx. 35 kg Knife speed mixing/cutting: 50 to 5,100 rpm Reverse knife shaft operation: 50 to 500 rpm Knife tip speed: up to 97 m/s Podpezcux Ssfx Abpora Bowl speed: 7 to 20 rpm Knife drive: infinitely variable Bowl drive: infinitely variable Time/revolution cut-off: yes Temperature cut-off: yes Central lubrication: yes Remote control: yes Touch control / hand control / knee control: yes / yes / yes Hydraulic knife cover drive: – Hydraulic ejector: – Manual ejector: – Recipe manager KPV: optional Scale: optional Standard Electrical Data: Knife shaft drive power: 12 kW Bowl drive power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Customer-side pre-fuse: 32 A

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Pendulum operation with partition wall 2x swiveling bridges Coolant tank 290 l with belt filter Pjdpfx Aboxup Iqjpjra Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 2000 kg 190 mm connected load frequency 400 V total power requirement 0,75 kW stroke speed - idle stroke upwards 40 sek. Prodpfx Aofrzt Ajbpsa stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 1000 kg 190 mm connected load frequency 380 V total power requirement 0,75 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1,3 x 0,8 x 0,2 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Prjdpefrztxefx Abpea Wide applicability for workshops, assembly departments, loading pits, etc.

Year of construction: 2020, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro 2-XS from premium manufacturer Rational (successor to the VCC 112T). The iVario Pro 2-XS is offered including basic accessories and a base unit. The Vario Cooking Center is in excellent condition. These are example images; actual images will follow shortly. The unit is available from approximately week 35. Prodpfx Abozvwqiopja The list price for this unit is: €11,980 net / €14,256.20 gross The list price for the base unit is: €1,227 net / €1,460.13 gross Our price: €7,500 net / €8,925 gross You will receive an invoice with VAT shown. Service: We will gladly connect you with a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us; we have access to a wide range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. • High-quality brand-name equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: 1100 x 756 x 485 mm • Power connection: V: 400 / kW: 13.7 / Hz: 50-60 • Serial number: E07VK20068047700 • Year of manufacture: 2020 • Capacity: 2 x 17 liters Additional features included: • iZone Control • Low-temperature cooking • Socket (Type F) • WiFi • Ethernet and USB interface Condition: Used, major inspection performed and fully functional Additional information: • Integrated hand sprayer with automatic retraction and spray dosage • High-quality pan base - seamless with rounded corners • Core temperature sensor with 6 measuring points • 1,200 programs, each with up to 12 programmable and nameable steps • Integrated hose sprayer on the unit, integrated water drain in the pan • Temperature unit adjustable in °C or °F • Cooking pan can be tilted • Lid with integrated water inlet • Automatic display of service messages • IPX5 splash water protection • USB interface for HACCP data output and updates Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).