Used Vacuum Hardening Furnace for sale (5,187)

Condition: good (used), Year of construction: 1995, functionality: fully functional, Useful Dimensions : W600*D900*H900 mm Loading Capacity : 800 kg/batch Cooling Pressure : 10 bar (abs.) Nlodpfx Akovfpfzjfja Vacuum Level : 10exp-2 mbar (manufacturer specs.) Cooling Gas : N2

Year of construction: 1990, condition: used, The machine underwent a complete overhaul by the original manufacturer in 2016. Since then, it has seen very limited use and has been stored and disconnected for several years now. Njdpfx Aeyaczpekfjla

Year of construction: 1985, condition: used, Hardening furnace Heraeus Type KM 260 width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c Nodpfegtxuqjx Akfola

Year of construction: 1984, condition: used, max. temperature 1.050 Grad size of opening 380 x 230 mm Nlsdpfx Aji Db Dbokfsa depth of chamber 680 mm volume 60 L voltage 380 V total power requirement 19,0 kW weight of the machine ca. 540 kg dimensions of the machine ca. 1,15 x 1,35 x 1,65 m - Serial-No.: 13817

Condition: good (used), Internal item no.: 25121 Hardening furnace Nolzen WL 20 / 19 / 40 Max. temperature: 1150°C Power: 8KW Connection: 380V Njdpfx Akjyxpdcjfjla Internal chamber dimensions: W 20 / H 19 / D 40 cm Dimensions (LxWxH): 60 x 76 x 84 cm Weight: approx. 200 kg

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 16109, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Nledpfx Asx Ap N Rskfja Slide Rail Track Part Entry Cart 1300 Max Temp Sublocation - Heat Treatment area.

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, 12 months warranty, in stock, excellent condition Resistance-heated system with gas-tight furnace muffle - Continuous operation Tmax 800°C - Max. temperature approx. 900°C (under protective gas) - SE-402 programmable controller - 3-zone heating - Gas supply system: 2 different protective gases, as well as fuel gases - Gas circulation - Vacuum system - Inner muffle dimensions (W x D x H): 580 x 830 x 1500 mm (special length) - Muffle volume approx. 722 liters - Max. charge weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Flare-off device with flame monitoring - Sight glass DN150 Nledpfsyxlwrox Akfsa - Max. gas operating pressure 7 mbar - Mains voltage 400V, 3-phase, N, PE - Heating power 70 kVA - Rated current 3 x 97A - Weight 1900 kg - External furnace dimensions (W x H x D): 1700 x 1950 x 2750 mm - Control cabinet (W x D x H): 510 x 1360 x 500 mm - Operating manual, circuit diagrams, CE declaration The furnace is offered reconditioned (all switching electrical components such as contactors, etc. have been replaced with new ones), new sealing, electrically tested incl. measurement protocols. Inspection in our warehouse by appointment! Furnace, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Nljdpfx Asxcb Hnokfja

Condition: ready for operation (used), Year of construction: 2001, total width: 1,500 mm, total length: 3,000 mm, Glass tempering furnace 4-19 mm, loading 1.5 x 3 m, without convection, furnace is connected, machine is operational but requires improvements, on-site testing possible. Nodpfx Aksx Dy Sfjfola

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° MARCELS MASCHINEN AG Njdpfxovhazfo Akfela

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Nljdeyabxyepfx Akfoa Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: as good as new (ex-display), vacuum drying oven Nodpfx Asfbl T Nekfsla Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Nlodpfx Aksyubphefea Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h

Condition: excellent (used), Stock number: 2896 Manufacturer: Heraeus Year of manufacture: Machine number: 7406922 Type / Model: MR 260 Interior width x height:: 260 x 160 mm Njdpfx Akjurf H Refela Interior depth: 500 mm Temperature: up to 1000 °C Connection: Accessories/equipment: Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Year of construction: 2002, condition: excellent (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Nlodpsydll Sofx Akfea All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces Nlodpfx Akjydllljfsa - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Maximum temperature: 750°C Year of construction: 2001 Nlodpfx Akjvcyf Tjfja Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V output 3 kw Nlsdpfxjthr Nce Akfea range - high tensile Innen 295x230x125 mm

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees MARCELS MASCHINEN AG Nljdshz D Iwepfx Akfoa

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Maximum temperature: 200 °C In the past, the oven was part of a plant and the product was transported via a conveyor belt, Nljdpfx Akjvgy Ivjfja The oven was previously controlled by PLC, it was dismantled,

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW Nlsdpfx Akod Srlrsfoa Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Financing through our bank is also possible. komplett-konzept.leasingo.de Nljdpfx Akod Spx Dofea More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, temperature: 630 °C, power: 450 kW (611.83 HP), plate length: 1,400 mm, plate width: 1,100 mm, TECHNICAL DETAILS Device type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: clear float glass Maximum glass size: 1,400 × 1,100 mm Furnace Furnace width: 1,600 mm Opening/closing height: 500 mm Opening mechanism: electric Motor power for opening/closing: 1.5 kW Temperature: 630 °C Rollers Roller type: quartz rollers Roller diameter: 60 mm Number of quartz rollers: 46 Number of rollers in the cooling section: 22 Roller spacing: 100 mm Heating Heating system: electric with forced convection Heating power: 450 kW Nodpfxewtfiqs Akfjla Control: PLC control with zone-dependent temperature regulation Speed Speed range: 1 – 10 m/min MACHINE DETAILS Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total weight: 10 t System configuration Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process sequence 1. Glass loading: The flat glass is placed on the loading table and transported into the heating section. 2. Heating: In the heating section, the glass is uniformly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Cooling (Annealing): In the cooling section, the glass is uniformly and slowly cooled to reduce stress. 5. Glass unloading: The processed glass is conveyed to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table - Zone-wise controllable heating system via PLC control - Forced convection system for uniform heat distribution - Quartz rollers with close spacing for precise glass guidance - Integrated cooling section with 22 rollers for controlled glass cooling The furnace has been dismantled into components of approximately two meters in length. This allows transport with standard trucks.

Condition: excellent (used), Year of construction: 2017, Max. glass size: 3210 x 6000 mm Min. glass size: 200 x 400 mm Glass thickness: 4 - 19 mm Start-Up: 2018 Nlodeik E Srjpfx Akfja

Condition: good (used), horizontal single-chamber glass tempering system suitable for coatet glass assignable area: max. 2400 x 4200 mm Nlsdpfxeipx Dys Akfja KW: 814,5 Dimensions: length = 22 m, width = 7 m