Used Vas Fb 12,9 for sale (1,824)

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Gkjdpfxevytfuo Apwja Including thermal oil pumps Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: good (used), Clamping jaws for round samples -Manufacturer: VAS, Clamping jaws for round samples, 4 pieces Gkedpfxjmiqm Ss Apwea -Type: 15-30 mm -Dimensions: see photo technical drawing -Case dimensions: 270/230/H80 mm -Weight: 6.2 kg

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program Gedpfxoykuh Ne Apwjka TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Gjdpoyktv Sefx Apwoka Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 230 kg, empty load weight: 8,100 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated telescopic boom lift Transmission: Hydrostatic Technical condition: New Front tire type: Solid rubber Gksdszr Shuspfx Apwea Front tire size: 18 Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire size: 18 Rear tire condition: 80 - 100% Description: The 180 ATJ articulated boom lift has a lifting capacity of 230 kg and a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloping, and congested surfaces. Thanks to its off-road capabilities, it is the ideal work partner on construction sites with uneven ground. The new, stepless hydraulic speed control reduces noise levels and fuel consumption. As with the other combustion engine-powered boom lifts, the 4 drive wheels and 3 steering modes facilitate movement and positioning of the machine on congested or narrow construction sites. The design of the control panel ensures a clear working environment for quick operation and immediate productivity.

Condition: ready for operation (used), Year of construction: 2019, This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Additional equipment Gjdpfjx Nr Sqsx Apweka • Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. • Leveling element (1 set = 4 pieces) with stud bolt M 12x100. • Feed side – left. • Feed roller conveyor URB 290, Length 3000 mm. • Feed adapter for URB 290/400. • Outfeed roller conveyor URB 290, Length 2000 mm. • Removal adapter for URB 290/400. • Connecting piece for machine, attachment on the right. • LM 55 M/man. Length stop, Measuring length 2000 mm. Machine Benefits Technical Machine Benefits • Automatic saw with a roller conveyor feed side length of 1500 mm and a discharge side length of 1000 mm. • Sheet metal tray for setting the machine. • Control unit attachment of the control unit to the swivel arm. Extra Information Machine still under power

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Universal milling machine EMCO FB-4 with 3-axis digital display Heidenhain, in very good condition. Technical data: >> Year of manufacture: 1997 >> Fixed angular table (clamping area 800 x 400 mm) >> Speed: 18 speed stages from 63 - 3150 rpm >> Mechanical feed: 18 stages Feed rate X and Y: 16-800 mm/min Feed rate Z: 8-400 mm/min Rapid traverse X and Y: 2400 mm/min Rapid traverse Z: 1200 mm/min >> Travels X/Y/Z: 450/300/350 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill, extendable 100 mm >> Tool holder: SK40 >> Weight approx. 1500 kg >> Machine dimensions L x W x H: 1485 x 1475 x 1680 mm >> Motor brake >> Connection value: 4 kVA Godpfx Apozq Efqjwjka Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray, machine feet >> Operating manual, spare parts list About the machine: Offered is a universal milling machine EMCO FB-4 in very good condition. The EMCO runs very smoothly, even at high speeds. The vertical milling head is fastened with four screws and can be easily swung to the side using the articulated arm visible on the left side of the machine. Feed and rapid traverse in each axis. The Emco comes from a training workshop and has been used very little. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Gksdjzp Dn Ispfx Apwoa Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: ready for operation (used), Year of construction: 2013, A 3D CNC coordinate measuring machine in need of repair is offered for sale. Max. measuring range X/Y/Z: 400mm/400mm/300mm, measuring principle: hybrid (optical/tactile), optical system: CCD camera with motorized zoom optics, focusing method: contrast autofocus, max. accuracy: 1.5µm (MPE), guideways: mechanical precision guideways, base structure: granite construction, control: CNC in all 3 axes, software: WinWerth®. The Z-axis no longer moves. An on-site inspection is possible. Gjdoztrbdopfx Apwoka

Condition: used, Year of construction: 2011, functionality: fully functional, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, Matched Set of Five Brother Industrial Overlock Machines from the MASI JEANS Factory This lot consists of five Brother industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. Brother's industrial overlock machines are known worldwide for dependable high-speed operation, clean seam formation and low maintenance requirements. The lot combines two Brother FB-N210 4-thread overlock machines (2012) with three Brother FA-V92A-5050 4-thread overlock machines (2009) - one closely matched platform generation. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched overlock production set with common operating principles, shared spare parts inventory and simplified maintenance. Ideally suited for denim manufacturing, jeans assembly, knitwear, workwear and other applications requiring fast, durable overedging seams. Bundle Contents Machine 1 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 37B-7268 Machine 2 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 36B-7267 Machine 3 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 4B-7212 Machine 4 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 30B-7213 Machine 5 Model: Brother FA-V92A-5050-57-E3V Internal Reference: 31B-7214 Technical Specifications Manufacturer: Brother Industries, Ltd. Model Series: FB-N210 (2 machines) / FA-V92A-5050 (3 machines) Machine Type: Industrial 4-Thread Overlock (Serger) Sewing Machine Country of Manufacture: Japan 4-Thread Overlock Configuration Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Professionally serviced (ERMACO ISM service partner) Production Benefits • Factory-matched Brother overlock production set • One platform generation - common parts and know-how • High-speed overedging with clean seam formation • Reliable performance during continuous production • Reduced operator training requirements Why Purchase This Lot • Five professional Brother overlock machines • Matching machines from one factory • Complete overlock capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion Applications • Jeans production • Denim manufacturing • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing Gedpfx Apeznyx Hewoka • Uniform production • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, functionality: fully functional, Manufacturer: unknown Year of manufacture: unknown Overall dimensions (L x W x H) in mm: 4,500 x 1,150 x 700 Width including drive: 1,050 Conveyor length in mm (retracted): 4,500 Conveyor length in mm (extended): 12,500 Conveyor width in mm: 700 Conveyor height in mm: 640 Load capacity between 2 supports in kg: 20 Gkodpfx Apezrr U Iowea Support roller axle type: Steel Support roller diameter in mm: 40 Support rollers per axle: 1 Support roller material: Steel Roller pitch in mm (retracted): 50 Roller pitch in mm (extended): 115 Drive: 10 x motor stations Motor manufacturer: SEW Motor specifications: 0.12 kW (total 1.2 kW), 230 V Conveyor speed in m/s: 0.7 Net weight: 360 Special features: Emergency stop, Schuko plug, Steinmetz circuit Condition: used / fully functional Functional test: OK

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) Gedpohqmamefx Apweka • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: used, mileage: 4,53,510 km, power: 375 kW (509.86 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 19,420 kg, maximum load weight: 12,580 kg, overall weight: 32,000 kg, axle configuration: 8x2, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,800 mm, loading space width: 2,550 mm, Equipment: ABS, additional headlights, air conditioning, cabin, compressed air brake, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * Single owner * Documentation available * Only 453,510 km, original mileage * Condition: see photos * Palfinger PK 34002-SH E folding rear-mounted loading crane * Jib PJ 060 B * Hook height: 30 m * Lifting capacities: at 4.4 m = 6,700 kg; 6.3 m = 4,450 kg; 8.2 m = 3,250 kg; 10.3 m = 2,450 kg; 12.4 m = 1,960 kg; 14.5 m = 1,640 kg; 16.7 m = 1,420 kg; 18.8 m = 1,200 kg; 19.7 m = 760 kg; 21.6 m = 680 kg; 23.4 m = 620 kg; 25.2 m = 570 kg; 27.2 m = 480 kg; 29.2 m = 210 kg * Radio remote control * 5th and 6th control circuit * 4 hydraulic outriggers * Swivel fork mount * Platform body * Platform dimensions: Length = 6,800 mm x Width = 2,550 mm * Wooden floor * Multilock * Trailer hitch * Cab with single bunk and 2 seats * Air conditioning * Auxiliary heater * Retarder * 1st, 2nd & 4th axle steered * 4th axle liftable * Leaf/air suspension with lifting and lowering function * Multifunction steering wheel * Cruise control * Automatic transmission * Xenon headlights * Blind spot assistant * Comfort driver’s seat, air-suspended * Heated and ventilated seats * Alloy wheels * Roof hatch * Hill-start assist * Radio USB AUX * Hands-free system * CB radio * Rotating beacons * LED daytime running lights * ABS/ASR/ESP * Full air suspension * Differential lock * Sun visor * Wheelbases: 1,700 mm + 4,100 mm + 1,350 mm * Gross vehicle weight: 32,000 kg / 34,000 kg possible * Unladen weight: 19,420 kg * Payload: 12,580 kg If a new TÜV inspection is required, we are happy to provide a quote from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Gedpfx Apjzqdzksweka More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the goods to ensure that buyers do not have any false expectations regarding the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to independently verify condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Gkedpfxoww Hhvo Apwoa Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: like new (used), For sale is a like-new Felder FB-510 band saw with a cutting width of 480 mm. This demonstration machine is in its original condition, so you will receive the full warranty. Technical data: - Cutting width 480 mm - Cutting height 410 mm - Table size 640 x 500 mm - Table tilt -10° to +45° Gkedeznv I Repfx Apwea - Blade length 4318 mm - Motor power 2.9 kW / 4 hp, 400 V version The band saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! For information, call 06244-20299. Related terms: band saw, saws, saw, band Reference: R-A0117

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Gkodpfx Apozi S Nmjwsa -Manufacturer: ismet, transformer -Type: ISTK -Item No.: 469133 -Power: 1500 VA -Voltage: 380V / 110/220V -Technical data: see photo of the nameplate -Dimensions: 220/155/H150 mm -Weight: 13.1 kg

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, single-phase transformer, control transformer -Manufacturer: Günter Kirch, Transformer Control Transformer Type STR -Power: 630/1800 VA -Voltage: 380V / 220V -Technical data: see photo of the type plate -Dimensions: 150/115/H145 mm -Weight: 7.7 kg Gksdszi S Ipspfx Apwja

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, transformer -Type: DG Godjzi Sglspfx Apwjka -Item No.: 603133 -Power: 960 VA -Voltage: 380V / 24V -Technical data: see photo of the nameplate -Dimensions: 240/210/H225 mm -Weight: 15.4 kg

Condition: used, Year of construction: 2007, functionality: fully functional, roll diameter: 80 mm, roll width: 620 mm, roll pitch: 70 mm, total width: 680 mm, total height: 120 mm, total length: 2,170 mm, construction width: 680 mm, construction height: 120 mm, Manufacturer: TGW Year of manufacture: 2004 Overall dimensions: approx. 2,170 x 680 x 120 mm (LxWxH) Width including side panel: 680 mm Side panel height: 120 mm Gkedpfx Apozpabdowoa Width including drive unit: 680 mm Conveyor width: 620 mm Curve (degrees): 90° Curve radius, inner: 800 mm Curve radius, outer: 1,480 mm Roller type: Steel with plastic coating / conical Rollers per axle: 1 Roller length: 620 mm Roller pitch, inner: 70 mm Roller pitch, outer: 110 mm Roller diameter: inner: 50 mm, outer: 80 mm Drive type: Gravity Motor: None Direction of travel: Left/right Functional test: OK Condition: Second-hand / fully functional

Condition: used, first registration: 02/2014, Equipment: ABS, Trailer refrigerated box Empl / Frigoblock ? BÄR tail lift Vehicle details: Manufacturer: Empl Fahrzeugwerk GmbH (AT) Type: VAS 2132 60F0 Chassis number: VA9 2132 60F0 E10084 Year of construction: 2014 Body: Insulated refrigerated box Axles: 2 axles (tandem) Total weight: 18,000 kg Unladen weight: approx. 12,120 kg Payload: approx. 5,880 kg Body & Dimensions: Internal length: 8,955 mm Internal width: 2,490 mm Internal height: 2,670 mm Load volume: approx. 59.4 m³ Body is insulated, suitable for refrigerated and deep-freeze transport Equipment: Refrigeration unit Frigoblock FK10A (power connection 400/690V) Internal evaporator with fan unit Air ducts for uniform cooling BÄR Cargolift tail lift (hydraulic, 2,000 kg load capacity) Tie-down rails in the interior Support legs, chocks Side protection / underrun protection Condition: Body is sealed and insulated. Gjdpfx Aezgv Sgspwska Normal signs of wear and tear consistent with age, both inside and outside. Area of application: Ideal for the transport of food, fresh produce, deep-freeze goods or pharmaceutical products. Price: 4,900 Euro Location: Austria, Wienerherberg Contact:

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm infeed height : ± 800 mm total dimensions : ± 3.600 x 1.000 x 2.300 mm Gsdpfx Apjzktz Hjwoka adjustable speed mobile as new

Condition: used, Year of construction: 2008, Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data Gkjdpoy I Nt Nefx Apwsa - Formats: 28 × 1.5 closures - Application: Capping of bottles (roll-on closures) - Configuration: Rotary turret with 12 capping heads - Neck finish: 28 × 1.5

Condition: used, Stainless steel VA chimney cover, chimney hood -Hole spacing: 135 x 385 mm -Price: per piece -Number: 2x available Gjdsb Uhm Ajpfx Apweka -Dimensions: 655/730/H170 mm -Weight: 4.7 kg

Condition: used, Pump, gear pump -Manufacturer: Scherzinger, pump from machining center Werner TC 2.6K Gksdpfx Apsgz Ir Dswoa -Type 250 FB / M075 / GT -Motor power: 0.75 kW -Speed: 1400 rpm -Dimensions: 420/200/190 mm -Weight: 18 kg

Condition: used, Chimney, exhaust pipe, chimney stainless steel pipe -Chimney system: O 250 mm, not insulated Gkjdpfx Aod N Ddtepwoa -Quantity: 2 pieces of 1 m each -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg