Used Wagner Fe4000 for sale (138)

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive Djdpfxeg Uf I Ae Aa Necg

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Dsdpfx Aajv Ed Ukj Njcg Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: excellent (used), Year of construction: 2016, CNC machining center WAGNER WBE 1600 R Year: 2016 Control: Siemens 840 D Technical data: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 630 mm Table dimensions: 1900 x 700 mm Spindle speed: 8000 rpm SK 40 Videos of the machine available Dsdpfx Ajy Na Ugsa Necg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year 2023 • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Y-axis: +/- 60 mm Dcsdsy Nzc Eepfx Aa Nsg Sauter 12-position BMT Sub-spindle Full specification available as PDF file

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen Dedpfxjyrhb So Aa Nscg • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Djdpfjy N Abpex Aa Nocg Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), * Brand: Wagner * Type: electro magnetic conveyor belt * On stock: 2 pieces * 1x : length frame A-A = 1900 mm * Beltwidth: 800 mm * Driving: 1,5 kW gearbox * Dim. block: 1000 x 750 x 400 mm * Incl.: rectifier. * 1x: length frame A-A = 1900 mm * Beltwidth: 1000 mm * Driving: 3 kW gearbox * Dim. block: 1300 x 950 x 350 mm * Incl.: rectifier. Dedpfx Ajy D Sx Tsa Nocg

Condition: used, Year of construction: 1958, turning diameter over bed 3050 mm turning diameter over slide rest 2500 mm turning length 21200 mm Control Siemens type 840D turning speeds 0,236-60 U/min faceplate 3000 mm Dsdpfx Aasyqtpro Necg main drive motor 200 kW tailstock quill diameter 900 mm steady 1200 mm steady 1200 mm steady 750 mm steady 750 mm with live steady 2000 mm faceplate 2000 mm Thickness 330 mm workpiece weight 200 t vier Bahnenbett Mitlaufendes Stützlager durchmesser 680 Bohrstangenlagerung Rollenbock Rollenbock mit Adapter Bohrstand 450 x 10300 mm Bohrstand 650 x 11100 mm Innenschleifmaschine Faros Adapt for Bohrstangenaufnahme The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2012, Pneumatic double diaphragm pump Cobra 40 -10 Good condition - Year of manufacture: 2012 Its unique design enables low-pulsation operation Consistent material flow ensures a perfect spray pattern and optimum surface quality Ideally suited for processing shear- and moisture-sensitive materials Djdpfx Aoy A Tqboa Njcg Minimal shear forces – ideal for processing UV coatings, for example Perfectly suited for processing small material quantities and for frequent color changes Scope of delivery: Basic unit on frame, HD twin hose 7.5 m, upper container 5 l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40 Technical data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg

Condition: used, Year of construction: 2000, Used bed-type milling machine from Wagner Model: SMB 2000 Djdjy Atypjpfx Aa Nocg Heidenhain TNC 426 CNC control Including various tool holders (excluding tools) SK 50 spindle taper Swivelling milling head

Condition: used, Year of construction: 1995, color: green, overall weight: 12,000 kg, maximum load weight: 7,550 kg, empty load weight: 4,450 kg, loading space volume: 26 m³, loading space width: 2,200 mm, loading space length: 5,600 mm, loading space height: 2,150 mm, mileage: 1,001 km, first registration: 01/1995, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Superstructure: Roll-off container with closed roof and unloading system, approx. 26m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dedpfx Aasvhl Eij Necg - .

Condition: used, Year of construction: 1996, color: green, overall weight: 12,000 kg, maximum load weight: 7,550 kg, empty load weight: 4,450 kg, loading space volume: 26 m³, loading space width: 2,200 mm, loading space length: 5,600 mm, loading space height: 2,150 mm, mileage: 1,001 km, first registration: 01/1996, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Superstructure: Roll-off container with closed roof and unloading system, approx. 26m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dcjdpovhl Evjfx Aa Neg - .

Condition: used, Year of construction: 1995, color: green, overall weight: 12,000 kg, maximum load weight: 7,880 kg, empty load weight: 4,120 kg, loading space volume: 26 m³, loading space width: 2,190 mm, loading space length: 5,600 mm, loading space height: 2,180 mm, mileage: 1,001 km, first registration: 01/1995, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Superstructure: Roll-off container with closed roof and unloading system. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dodpfxevhlzwe Aa Njcg - .

Condition: used, Year of construction: 2000, color: green, overall weight: 12,000 kg, maximum load weight: 7,550 kg, empty load weight: 4,450 kg, loading space volume: 26 m³, loading space width: 2,200 mm, loading space length: 5,600 mm, loading space height: 2,150 mm, mileage: 1,001 km, first registration: 01/2000, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Dsdpovhl Epofx Aa Nocg Superstructure: Roll-off container with closed roof and unloading system, approx. 26m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 1995, color: green, overall weight: 12,000 kg, maximum load weight: 7,880 kg, empty load weight: 4,120 kg, loading space volume: 26 m³, loading space width: 2,190 mm, loading space length: 5,600 mm, loading space height: 2,180 mm, mileage: 1,001 km, first registration: 01/1995, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Dsdjvhlzqepfx Aa Necg Superstructure: Roll-off container with closed roof and unloading system. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 1995, color: green, overall weight: 12,000 kg, maximum load weight: 7,880 kg, empty load weight: 4,120 kg, loading space volume: 26 m³, loading space width: 2,190 mm, loading space length: 5,600 mm, loading space height: 2,180 mm, mileage: 1,001 km, first registration: 01/1995, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Superstructure: Roll-off container with closed roof and unloading system. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dcsdpfx Aevhlzkea Njg - .

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Automatic Wagner powder coating plant, year of manufacture 2012 - Wagner SuperCube booth - Wagner SuperCenter powder supply system - PBS filter and cyclone 18,000 m³/h - STS CO2 extinguishing system - Pre- and post-coating stations with scissor lift platforms - Clearance dimensions (H): 2500 mm, (W): 1000 mm - 12 automatic guns + manual powder coating units Dcedpsy Icfxefx Aa Nog Disassembly by arrangement at our facility in Bad Laer! Price upon request

Condition: excellent (used), Year of construction: 2008, x-travel 800 mm y-travel 400 mm z-travel 500 mm Control Siemens table surface area 1270 x 320 mm spindle turning speed - stepless 0 - 6000 U/min distance spindle /table 100 - 600 mm throat 510 mm tool taper SK 40 Dedpfsymqwxox Aa Nocg weight of the machine ca. 2,7 t dimensions of the machine ca. 2,2 x 2,0 x 2,5 m

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) Dodsyrr Rqepfx Aa Necg - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Dodpfx Aasy Eqtis Nscg

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 1,830 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, We offer this used WAGNER WM 2000 milling machine, year of manufacture 1991. Model: WM 2000 Machine serial no.: 9109330 Year of manufacture: 1991 Dcodpfjyub Scsx Aa Njg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MB116360 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 - Table length [mm]: 1300 - Table width [mm]: 650 - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 Djdpfexta Niox Aa Njcg - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machine-vice - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Rolling unit, manufacturer Wagner ----- Strehl unit, manufacturer Wagner Dcodpsy Dvauefx Aa Nsg

Condition: excellent (used), CV saw grinder Wagner model LT Djdpfx Aeywaxnja Nocg

Condition: used, Year of construction: 1988, grinding diameter 250 mm grinding length 600 mm Dsdpfx Asynnvbsa Njcg max. dia. of grinding wheel 355 mm max. width of grinding wheel 50 mm peripheral speed 2.000 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.