Used Weiler Condor B for sale (39,018)

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1105, spindle bore: 48 mm, center height: 170 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, input voltage: 380 V, input frequency: 50 Hz, WEILER CONDOR B – Guide and Feed Spindle Lathe - Connection: 4 kW Gkodjztwwkjpfx Ap Dsc - Rated current: 9.5 A - Distance between centers: approx. 900 mm - Distance between centers above the bed: approx. 170 mm - Swing over bed: approx. 340 mm - Distance between centers above the carriage: approx. 90 mm - Swing over carriage: approx. 180 mm - Spindle bore: approx. 48 mm The machine is equipped with a tailstock, a Multifix tool holder, and a digital display from the manufacturer ACU-RITE. The machine comes from a training workshop; therefore, the guide and feed spindle are covered. FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop Gkedevadqzspfx Ap Doc - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 1989, 1 used lathe with lead screw and feed spindle Manufacturer: Weiler Gkodpfx Apez Adv Ee Dsc Type: Condor B Year of manufacture: 1989 Serial number: 89-1314 Technical data: Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital display Lever collet chuck Chuck guard

Condition: good (used), Year of construction: 1989, 1 used lead screw and spindle lathe Manufacturer: Weiler Type: Condor B Year of manufacture: 1989 Technical data: Gjdpfx Apszuthhj Dskc Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Spindle speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital display Lever collet chuck Chuck guard

Condition: used, Year of construction: 1992, Weiler Guide and Lead Screw Lathe Type / Model: Condor B Condition: Used Gkedpfx Apjzfhgto Dec Year of Manufacture: 1992 Technical Data Center height: 165 mm Center distance: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm - 185 mm Main spindle and drive Speed range: 22 - 2800 rpm Spindle bore: 40 mm Spindle head: DIN 55027 / Size 5 (with bayonet fitting) Drive power: 3.2 kW Feed and threading Longitudinal feeds: 0.016 - 0.8 mm/rev Metric thread pitches: 0.18 - 28 mm Tailstock Internal taper of the quill: MK 3 Quill travel: 110 mm Dimensions (L/W/H) approx.: 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Delivery costs via freight forwarder to the curb are shown in the shopping cart or in the individual offer for items on request.

Condition: refurbished (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, quill stroke: 85 mm, total length: 1,800 mm, total width: 1,300 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,100 kg, Dear Sir or Madam, We are offering for sale a Weiler Condor B lead and draw spindle lathe in fully refurbished condition! This model is particularly distinguished by its extremely user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B is in the size range between the Weiler Praktikant and the Weiler Commodor and is therefore a true all-rounder in any workshop. The machine will undergo extensive refurbishment in our workshop, so that it will be in like-new condition both technically and visually! The following work will be carried out during the refurbishment of the machine: - Basic cleaning - Repainting - Overhaul of the guideways - Replacement of all lubricants - Replacement of all standard parts such as handles, buttons, screws, etc. - Replacement of all wear parts such as belts, chains, wipers, etc. - Replacement of all electronic components such as contactors, transformers, switches, etc. - Documentation with test report, parts list, and geometry report Availability: upon request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mounting: short taper DIN55027 size 5 with bayonet lock Quill stroke: 85mm Spindle speeds: 22-2800 rpm Possible thread types: metric, inch, module, diametral pitch Metric thread pitches: 0.18 - 28mm Spindle brake: can be switched on Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional equipment and accessories: chuck guard (NEW), coolant system, 2x emergency stop, lead and draw spindle cover (optional), K+C digital display NEW (optional), operating manual, technical documents, and much more on request... Godpfx Asztf A Usp Djkc Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are workshop-tested at least. - All lubricants and any worn parts will be replaced beforehand - If desired, we will completely or partially overhaul the machine of your choice - If desired, we will repaint the machine of your choice in your desired color - If desired, you can order additional accessories such as tools, etc. directly with your order - If desired, we can install additional accessories such as safety devices, etc. - We will be happy to take care of the shipping and/or delivery

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, Dear Sir or Madam, For sale is a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent space-to-center height/center distance ratio. The Condor B is sized between the Weiler Praktikant and the Weiler Commodor, making it a genuine all-rounder for any workshop. The machine undergoes a thorough partial overhaul in our shop to ensure it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and all levers are easy to operate. You are welcome to inspect the machine on-site to verify its condition yourself. Gsdpjw N Np Sefx Ap Dokc Availability: on request Center height: 165 mm Center distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Chuck mounting: short taper DIN 55027 size 5 with bayonet lock Quill travel: 85 mm Spindle speeds: 22–2800 rpm Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (LxHxW) Weight: approx. 1100 kg Further equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more on request... Our service commitment to you: - We are a certified master machine engineering business - All machines are at least workshop-tested - All lubricants and any worn components are replaced prior to sale - On request, we offer complete or partial overhaul of your selected machine - On request, we can repaint your chosen machine in any color you wish - Additional accessories such as tooling can be ordered with the machine upon request - On request, we can also install further accessories such as safety devices - We are happy to handle shipping and/or on-site installation for you

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover Godpezvx A Tofx Ap Dokc -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1997, Lead and feed screw lathe / WEILER CONDOR B incl. 3-axis digital readout / Heidenhain - Machine from educational facility - Center height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 185 mm - Turning length: approx. 800 mm - Spindle speeds: 22 - 2800 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric, etc. - Bar capacity: 40 mm - Tailstock / quill taper: MT 3 - Electrical chuck guard - Multifix tool post with holders - 3-jaw chuck - Forkardt - Machine lamp - Chip guard at rear - Bed stop - Machine feet - Documentation Dimensions (LxWxH): 1.8 x 0.8 x 1.6 meters / Weight: 1100 kg Subject to errors and input mistakes. Gedpfx Apjy A Ey Uj Djkc

Condition: reconditioned (used), Year of construction: 1989, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted RAL 7035 light grey Machine no.: 1401 With guarantee Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Chuck guard with electrical safety device, new - Quick-change tool holder base body, size B - Bed stop - Coolant system - Chip guard - Operating manual Gkjdpfx Ajg R S Rcop Doc -used, as is -

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, spindle bore: 56 mm, spindle speed (max.): 4,000 rpm, overall weight: 1,450 kg, For sale is a high-precision, cycle-controlled lathe, a WEILER CONDOR VC plus, manufactured in 2013. The machine is in fully functional and extremely well-maintained condition and comes with a very extensive set of accessories (pictures of the machine in use are included). Technical data & equipment: Manufacturer / Model: WEILER CONDOR VC plus Year of manufacture: 2013 Center height: 180 mm Distance between centers: 800 mm Swing over bed: 360 mm Spindle bore: Ø 56 mm Spindle speed: continuously variable up to 4,000 rpm Operating voltage: 400 V Connected load: 12.5 kVA Machine weight: approx. 1,450 kg Digital display / control: WEILER VC plus screen electronics Accessories & scope of delivery (as shown in the pictures): - 1x steady rest (fixed rest) - Extensive Multifix quick-change tool holder set - Large selection of chuck jaws (hard & soft) - Three-jaw chuck mounted - Splash guard / protective cover Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale Gkodpfx Apsz Dwtwo Djc BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock Gkjdpfx Aewrm Dtjp Doc >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: good (used), functionality: fully functional, Internal article number: 26095 Lathe Weiler Condor 81, Type B Serial number: 84112 The machine is equipped as follows: Three-jaw chuck, Weiler 160 Base holder, Multifix "B" MK3 drill chuck Chuck guard 3-axis digital display (K&C) 4x Multifix "B" steel holders Collet set with draw tube Technical data: Center height 165 mm Center distance 750 mm Spindle speed: 22 to 2800 rpm Spindle bore 40 mm Short taper spindle head, DIN 55027, size 5 with bayonet lock Tailstock, MK 3 Feeds from 0.015 to 0.46 mm/rev Dimensions (L x W x H): 200 x 100 x 130 cm Weight: approx. 1000 kg In good technical condition and fully functional! Gsdpfx Aez E Nxzjp Dekc You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: excellent (used), functionality: fully functional, Weiler high-precision lathe, model Condor 81, center lathe with 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture: 1982, Machine no. 82 016 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev Gedpfx Apez Ehzzs Djkc >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake: can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 1 three-jaw chuck, 160mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back panel >> Coolant system >> Machine feet At an additional cost: Collet chuck system, new, and collets, new, from 3 to 26 mm in 1 mm increments. About the machine: Offered is a used Weiler Condor 81 in very good condition. It comes from a training center and has been well maintained. The machine is fully functional, of course. It is a very robust and powerful machine. The new 3-axis digital display from K&C makes the work even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up. Gkedsz D Hx Njpfx Ap Dec

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. - 3-jaw chuck - Tailstock - Chip guard - Machine light Gsdpfx Apsz Izi De Djkc - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: used, Year of construction: 1982, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1982, with a three-jaw chuck, Multifix system, and collet chuck assembly including a set of collets. The machine is in good, operational condition and can be demonstrated under power by arrangement. Gjdpfjzq R Anex Ap Dskc

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.) Gsdjz A Ah Rjpfx Ap Dskc

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Commodor B AC lathe, manufactured in 1996, with a 3-axis Weiler digital display, three-jaw chuck, Multifix system, rear splash guard, and electric chuck guard. The machine is in good, operational condition and can be demonstrated under power by arrangement. Godpszr El Tofx Ap Djkc

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm Gedsyuyrujpfx Ap Dskc - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout Gsdpfjxu Hlasx Ap Djkc >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre For Safety: >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.

Condition: ready for operation (used), Weiler Commodor B including a new 3-axis digital display from an educational institution -GS designation -Three-axis digital display, "NEW" -Center height 180mm -Distance between centers 1000mm -Spindle bore 56mm -Spindle speeds 15 - 2000 rpm -Automatic longitudinal / crossfeed -Threading / Metric / Inch / Module / Diametral Pitch -Electric chuck guard -2x Emergency stop -Multifix with inserts -Four-jaw chuck - Röhm -Chip guard Gedpszq Dklefx Ap Dskc -Coolant system -Very well-maintained original condition -Documentation Dimensions: L x W x H 2.3 x 1.2 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 -Condition: “Good” -Maximum turning diameter: 165 mm -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets Gkodpozvy T Tefx Ap Dec -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: Gkedpfx Apszq R Eco Dec 3-axis digital display The machine comes from a vocational training center and is in very good condition.

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Condition of guideways: "Good" -Optional 3-axis digital display -Center height 165mm -Swing over bed 330mm -Distance between centers 800mm -Spindle speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Collet chuck - quick-change system Gkodpjzta Dmofx Ap Doc -Four-jaw chuck -Multifix base and insert -Chuck guard -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2.0 x 0.8 x 1.6 meters / Weight 850 kg