Used Weiler Primus Lz for sale (871)

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm Iodpfxozbc Dte Anveau spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key Iaodpfx Anozbc Daevju - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Ijdpow I A Uxofx Anveau Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Type: Primus VCD Precision Lathe Year of manufacture: 2016 Commissioned: 2017 Condition: used, very good, like new, new maintenance performed according to factory specifications with acceptance report Operating hours: 1777h Spindle hours: 512h Scope of delivery: - Documentation - Machine feet Iasdpfey Ti Iksx Anvou - Machine lamp - Chuck - Coolant system - MultiFix size A

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Iajdpev D Ip Nsfx Anvsu Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Iasdpfsn Ard Dex Anvsu

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm Iedpjyu R H Nefx Anvjau 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: ready for operation (used), WEILER PRIMUS / MD-G / Mechanic's Lathe - Centre height: 125 mm - Centre distance: 400 mm - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix base holder with inserts - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Dimensions (LxWxH): 1.3 x 0.8 x 1.6 meters / Weight: 450 kg Iaedpfxey Sm Dte Anveu Subject to errors and input mistakes.

Condition: like new (used), Year of construction: 2015, GDW LZ 280 VC Lathe GDW LZ 280 VC with GDW digital display, year of manufacture 2015, in very good original condition. Iajdpfxsy Sbqne Anvsu The machine comes from the special construction division of a renowned German engineering company. CE-compliant!! Technical Data: Year of manufacture: 2015 📐 Working Area & Dimensions • Center height: 165 mm • Distance between centers: 670 mm • Swing over bed: 330 mm • Swing over cross-slide: 190 mm • Bed width: 220 mm • Machine weight: approx. 1,100 kg • Footprint (L x W x H): approx. 1,570 x 1,035 x 1,800 mm ⚙️ Main Spindle & Drive • Speed range: 30 – 5,000 rpm (infinitely variable) • Drive power: 7.0 kW to 7.5 kW • Spindle bore: 43 mm • Spindle nose: DIN 55027 (size 5) 🛠️ Carriage & Tailstock • Cross slide travel: 165 mm • Top slide travel: 115 mm • Swivel range of top slide: +75° / -65° • Tailstock taper: MT 3 About the Machine: The GDW LZ 280 VC is the smallest machine in the GDW range. It is a lathe designed for the highest demands, featuring stepless speed control, constant cutting speed, and an impressive 7.5 kW drive power (at 40% duty cycle). This compact powerhouse excels in environments where space is at a premium but maximum precision is required, such as optics workshops, electrical and automotive workshops, laboratories, and even in Formula 1. Offered here is a GDW LZ 280 VC lathe with GDW digital display, year 2015. This lathe is in very good original condition. It comes from a company where it was only used occasionally for special construction projects. The machine features a very user-friendly control system. The guideways are regularly lubricated via central lubrication. The GDW LZ 280 VC has been mechanically and electrically tested by us. Take the opportunity to inspect and test the GDW LZ 280 VC under power on site. You can find more lathes from reputable manufacturers on our website.

Condition: excellent (used), Year of construction: 2004, Weiler Primus VC Lathe Primus VC with Heidenhain digital readout, year of manufacture 2004, in excellent original condition. The machine comes from the prototype workshop of a renowned German mechanical engineering company. CE compliant! Iasdpfx Aoy I U Dyonvou Technical Data: Year of manufacture: 2004 Weiler Primus VC Center height: 140 mm Center distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE conformity declaration About the machine: The Weiler Primus VC is the smallest machine in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and a powerful 4 kW drive (40% duty cycle). The compact machine of great quality is found wherever maximum precision is required in limited spaces: such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a Weiler Primus VC lathe with Heidenhain digital readout, year of manufacture 2004. This lathe is in excellent, original condition. It comes from an operation where it was lightly used only for prototype construction. Very easy-to-use controls. The guideways are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler Primus VC under power at our site. Further lathes from well-known manufacturers can be found on our website.

Condition: ready for operation (used), L&Z Lathe WEILER LZ 330 incl. new 3-axis digital readout (from educational facility) - "NEW" 3-axis digital readout - Center height 165 mm - Swing over bed 330 mm - Turning length 800 mm - Spindle speed range (gearbox) 25–2800 rpm - Automatic longitudinal/cross feeds - New Multifix toolpost with holders - Three-jaw chuck Iedpjy Id Uhsfx Anvoau - Collet system with 20 collets - Original copy attachment - Various accessories - Documentation Dimensions (LxWxH): 1.8x0.7x1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical data: Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Spindle speed: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Iaodjx Htf Hjpfx Anvsu Price reduced!

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe of the brand Weiler type Primus LZ-GS The machine is in very good condition Technical data Year of construction 1989 Machine no. 4443 Operating voltage 380 V Center height 120 mm Center width 430 mm Speed:60 - 3000 rpm in 18 gear stages Spindle clearance 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feed rates from 0.03 to 0.15 mm /rev Possible threads metric, inch, module and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Iaedpfxsihig Io Anvsu Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Weiler Primus Excellent condition! Isdpfx Aoyy Ngtenvsau With accessories

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev Isdpfov Tyzcsx Anvjau >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: used, Year of construction: 1999, turning diameter 150 mm turning length 500 mm total power requirement 4 kW Iasdpsvm Dv Dsfx Anvsu weight of the machine ca. 0,8 t

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : Iasdevivmyopfx Anvju We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev Ijdpfxsu Aftgs Anvsau >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: Iasdpovtp Edefx Anveu A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm Iaedpfowa Dz Eex Anvju including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice Iaedpfx Anjyalurjvju - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: good (used), Storage location: 3116 Manufacturer: Weiler Type / Model: Primus Control: conventional Distance between centers: 450 mm Bore diameter: 23 mm Iasdpfxozaqizo Anveu Distance from top of bed to center line: 120 mm Swinging diameter over bed: 240 mm over carriage: Speed range: 150 to 3,200 rpm Weight: 650 kg Dimensions: 1,200 x 650 x 1,200 mm

Condition: good (used), Lathe Stock number: 3115 Manufacturer: Weiler Type/Model: Primus Control system: conventional Distance between centers: 450 mm Bore: 23 mm Height of centers: 120 mm Turning diameter over bed: 240 mm Iedpfxozaqihe Anvoau Turning diameter over slide: Speed range: 150 to 3,200 rpm Accessories/Equipment: 3-axis digital display, Heidenhain Weight: 650 kg Dimensions: 1,200 x 650 x 1,200 mm

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine xH: 4,3 x 2,5 x 1,95 m Oil Country Lathe Special machine for machining long bars and pipes. For sale is an extremely robust and precise WEILER E70 x 2000 heavy-duty lathe, manufactured in Germany to the highest quality standards. The machine is ideally suited for: ·Single-part production ·Repair work ·Toolmaking ·Heavy-duty machining applications in industry The WEILER E70 impresses with its: ·High rigidity and stability ·Large spindle bore capacity Iajdpfx Aszdn S Honvou ·Excellent torque performance Perfect for machining: ·Large shafts ·Flanges ·Pipes ·Heavy workpieces Tool holder: Multifix size C *

Condition: new, Trainee VCD One of the best-selling and most popular conventional precision lathes impresses with sophisticated technology maximum accuracy long service life tried and tested ergonomics minimum space requirement and a wide range of accessories. Proven for decades in single part and small series production, in trade and industry, training and further education, tool and jig construction. Equipment: Center width 650 mm Center height 160 mm Automatic handwheel disengagement Lead and traction spindle cover Holding brake Toolmaking accuracy according to DIN 8605 Infinitely variable speed control with maintenance-free three-phase asynchronous motor Speed-controlled frequency converter with actual value feedback Speed can be optimized precisely and continuously during machining Best cutting conditions for the finest surfaces in the shortest possible time The numerical position display (optional) offers a high level of operating convenience for working at a constant cutting speed. cutting speed, freely selectable speed limitation, oriented main spindle stop LED machine light Technical data WORKING AREA Center height 160 mm Swing diameter over bed 320 mm Swing diameter over facing slide 190 mm Center width 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED - / 6 kW Speed range 30-4,000 (5,000) min-1 Number of speeds infinitely variable FEED RANGE Quantity 24 Longitudinal 0.02 - 0.63 mm/rev Plan 0.006 - 0.2 mm/rev THREAD CUTTING RANGE Metric thread 0.25 - 8* mm REITSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 Equipped with: -Quick-change tool holder Multi-Suiss size B -18 liter coolant unit incl. coolant pump Iaodpfetznarox Anvsu The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.