Used Wire Welding Machine Cea Maxi-Compact 370 for sale (70,118)

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Fgsdpsz Dpapjfx Ap Doh

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Fgedsz Dpacopfx Ap Deh

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 Fsdpjxlr Tdefx Ap Degh rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) Fgedpfjz Ny Rkex Ap Deh • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Fsdpfoza T A Rjx Ap Djgh Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 345 mm, total width: 219 mm, total length: 568 mm, input voltage: 400 V, ground cable length: 1,000 mm, overall weight: 23 kg, type of cooling: air, electrical fuse: 16 A, welding power (max.): 12 kVA, open-circuit voltage: 50 V, welding current at 60% duty cycle: 220 A, welding current at 100% duty cycle: 180 A, space requirement height: 500 mm, space requirement width: 400 mm, space requirement length: 700 mm, input current: 16 A, continuous power (apparent): 8 kVA, Manufacturer Fgjdpfjy Uxwqsx Ap Djh Miller Model STi 270 Main Category Welding Equipment Machine Name / Vehicle Type Industrial Welding Machine Condition Used Functionality Fully Functional Inspection Under Power Yes Description Miller STi 270 industrial welding machine for sale. The unit is fully functional and suitable for professional welding applications. Supports both MMA and TIG welding processes. Compact and durable construction designed for workshop and industrial use. Technical Specifications Input Power 400 V, 16 A, 3-phase, 50/60 Hz MMA Adjustment Range 5–270 A, 20–30.8 V TIG Adjustment Range 5–270 A, 10–20.8 V Duty Cycle at 40% 270 A Duty Cycle at 100% 180 A Open Circuit Voltage 50 VDC (12 VDC)* Welding Processes MMA, TIG Dimensions (H x W x D) 345 × 219 × 568 mm Weight 23.2 kg Features VDR Lift-Arc Hot-Start Arc-Force

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system Fodpjz Ilrvjfx Ap Dsgh -Manufacturer: Heinz Soyer, stud welding machine with stud welding gun -Type: BMS-8H -Connection voltage: 230 V / 50/60 Hz -Stud welding gun: PS-3K -Welding area: Bolts and pins from M3 – M8 or Ø 2 – 8 mm -Quantity: 1x stud welding machine available -Dimensions: 350/350/H270 mm -Weight: 15.4 kg

Condition: good (used), Year of construction: 2023, functionality: fully functional, laser power: 1,200 W, Laser welding machine MaxPhotonics MA1-45, manufactured in 2023, with wire feeder, handheld laser gun with 5-meter cable, ground wire for safety with 5-meter cable, basic assortment of nozzles (for various applications), 1 Protect Starlight safety glasses, nitrogen pressure regulator, with wobble function, deflection 0-4mm, suitable for structural steel, aluminum, and stainless steel. Up to 4mm thickness. Interface for external safety components. The machine is fully functional. Fgodpfxjz D Dwcs Ap Deh

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper Fedpfx Apjzgu Ige Dsgh automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 29 volts Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Fgjdpjz Afhiofx Ap Deh Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle Fgsdpfx Apjzwb R Nj Doh 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft-soldering machine, copper band welding machine), consisting of a main machine and control system, "PLC control, touchscreen operation". Process description: The workpiece carrier enters the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding chuck. The welding chuck moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process takes place. This process is repeated until the armature is completely welded. The welding chuck moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Fedpfx Aeg Icfpsp Dogh Workpiece carriers with I0 armatures continue on the conveyor system; I0 armatures are conveyed to the removal conveyor. Technical data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse rating: 35 A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, machine/vehicle number: 199715, input voltage: 380 V, T-joint welding machine IDEAL. We only used it to weld a single product in small quantities. We don't know its history before that (almost 30 years ago), as we acquired the machine at a bankruptcy auction back then. Fodpozzzgfsfx Ap Dogh

Condition: good (used), Year of construction: 2004, EMA high-frequency welding machine with cooling water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V 106 A Foot pedal Water cooling, cooling water unit Fgodpsd Tv H Defx Ap Djh Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of delivery. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours. Fgjdpfx Apezzwrke Dsh

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 Fgodpfxjz A R R Ts Ap Doh -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fedpfjzd Rmgsx Ap Dogh Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding System, 8 kVA Universal welding station, 8 kVA, manually operated welding gun, dual program. Simultaneous connection of two tools with automatic selection of the corresponding welding program, which saves time and avoids errors, ensuring a simple and safe workflow. Body repairs: Resistance spot welding of sheet metal, smoothing with a dent puller (pins and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheet metal. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current and compensation function. Mains connection: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Heat current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg More items – new and used – can be found in our shop! Fedpfx Apel Smn Ss Degh International shipping costs available upon request!

Condition: used, An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement. Fgjdozuzzpopfx Ap Deh

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, For sale: a professional industrial machine for barbed wire production, manufactured by the leading Italian company Vitari / Eurolls Group. The machine is extremely reliable, with a compact vertical design and an operator safety cabin. Key features: Brand / Model: Vitari BVM (Eurolls Group) Year of manufacture: 2009 Certification: CE compliant Twisting type: Continuous (standard classic type – Iowa, Glidden, Domingo, Simplex, etc.) Core wire diameter: Ø 1.6 – 2.8 mm Barbed wire diameter: Ø 1.6 – 2.5 mm Barb spacing: Adjustable (60 – 150 mm) Fsdpfsz Ercpsx Ap Djgh Operating speed: Up to 50 m/min (up to 700 rpm) Weight of finished coil: Up to 35 kg Control: Digital meters for measuring meters and coils, quick control panel

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Fsdpfx Apsxf Hv He Degh Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: new, Year of construction: 2026, CORMAK WL2000 Laser Welder 3-in-1 is an advanced industrial device using fiber laser technology for precise welding, cutting, and cleaning. Thanks to its compact design and integrated control systems, the machine is an ideal solution for production plants requiring high efficiency, repeatability, and minimal thermal impact on the material. Main advantages of the machine Efficient water cooling system – ensures stable operating temperature and extends the service life of components. Ergonomic welding head – adjustable spot size from 0–5 mm, interchangeable nozzles, 7 m fiber optic cable, and full mobility. Automatic wire feeder – synchronized with the welding machine software, ensuring continuous operation. Welding with or without wire – flexibility in choosing the appropriate welding method. Processing of thin materials – e.g. stainless steel from 0.5 mm thickness. High weld repeatability – durable and aesthetic welds without the need for additional finishing. Optional laser cleaning function – expands the functionality of the device. Faster welding process – up to 3–10 times faster compared to traditional methods. Low indirect radiation level – proper protective glasses are sufficient for safe operation. Fgjdpfxoizr Rls Ap Deh Design and technology The handheld laser welder WL2000 is equipped with a 2000 W laser source, a water cooling system, and a modern welding head. The control system allows convenient switching between welding, cutting, and cleaning functions. The design enables operation in hard-to-reach areas, while interchangeable nozzles allow welding at various angles. Precision and work efficiency Thanks to the focused laser beam and minimal heat-affected zone, the CORMAK laser welder enables precise and durable welds without the risk of material deformation. High penetration depth and working speed make it an ideal tool for industrial applications where quality, speed, and repeatability are essential. Applications Processing of stainless steel, mild steel, galvanized steel, aluminium, and brass. Industrial plants, metalworking workshops, and production lines. Precision welding of lightweight and thin-walled structures. Removal of coatings and cleaning of metal surfaces. Standard equipment Laser welder with integrated water cooling system. Welding gun with focal length adjustment and accessory set. MaxPhotonics laser source. Automatic wire feeder. Complete set of connection cables. Starter kit of nozzles and protective lenses. Optional equipment Optical set for laser cleaning – PLN 1500 net. Training materials and support CORMAK provides instructional videos on its YouTube channel to help with machine commissioning and operation. This is valuable support for operators, especially during the initial period of using the device. Technical specifications Parameter Value Maximum laser power 2000 W Laser wavelength 1080 nm Penetration depth (stainless steel at 1 m/min) 4.60 mm Penetration depth (mild steel at 1 m/min) 3.60 mm Penetration depth (aluminium at 1 m/min) 4.10 mm Penetration depth (brass at 1 m/min) 4.10 mm Welding speed 0–120 mm/s Automatic wire feeder Ø 0.8–1.6 mm Maximum power consumption ≤6.05 kW Cooling system Water cooling Operating voltage 230 V Shielding gas consumption Approx. 10–12 L/min depending on wire diameter Dimensions 600 × 1100 × 1100 mm Weight 185 kg

Condition: new, Year of construction: 2026, CORMAK WL3000 laser welding machine is a professional 3-in-1 device with a power output of 3000 W, designed for laser welding, cleaning, and cutting. It has been developed for industrial plants and workshops requiring reliability, precision, and high operating efficiency. Thanks to fiber laser technology, the machine provides exceptional beam stability and enables processing of a wide range of metal materials while maintaining a minimal heat-affected zone. Main advantages of the machine Maximum power of 3000 W – increased penetration depth and higher welding speed. Water cooling system – ensures stable operating conditions during continuous operation. Ergonomic welding head – lightweight and flexible, with adjustable spot size from 0–5 mm and interchangeable nozzles. Automatic dual wire feeder – integrated with the control system. Welding speed up to 215 mm/s – up to 10 times faster than traditional methods. Ability to process thin materials – for example stainless steel with a thickness of 0.5 mm. Operating modes: continuous / modulated – full control over weld parameters. Welding with or without wire – versatile technological solution. Cleaning and cutting functions – expanded range of applications. Design and technology The machine is based on a fiber laser source with a wavelength of 1070 nm and a 10 m fiber optic cable. Thanks to its compact housing and integrated connections for shielding gases and cooling systems, the CORMAK WL3000 ensures safe and efficient operation. The high-power welding head enables welding at various angles, while the optical system guarantees excellent beam quality and stability. Precision and work efficiency The CORMAK WL3000 laser welder enables fast and repeatable welds without the need for additional finishing operations. Due to the small heat-affected zone, the material structure remains unchanged. Low levels of reflected radiation improve operator safety while maintaining excellent final weld quality. Applications Industrial and manufacturing plants Metalworking, automotive, and HVAC industries Laser welding, cutting, and cleaning of metals: mild steel, stainless steel, aluminum, brass Production of lightweight structures, railings, housings, and precision components Standard equipment Laser welding machine with water cooling system Welding head with focal length adjustment MaxPhotonics laser source Automatic dual wire feeder Connection cables Starter set of nozzles and protective lenses Optional equipment Optical kit for laser cleaning – PLN 1500 net Technical specifications Parameter Value Maximum laser power 3000 W Laser wavelength 1070 nm Fiber optic cable length 10 m Operating modes Continuous / Modulated Shielding gas flow rate 10–15 L/min Welding speed 0–215 mm/s Automatic wire feeder Ø 0.8–2.0 mm Fgjdpjkkbw Uofx Ap Doh Maximum power consumption ≤11.0 kW Focal length 150 mm Cooling system Water cooling Operating voltage 400 V Shielding gas consumption Approx. 10–12 L/min per wire diameter Dimensions 600 × 1100 × 1100 mm Approximate weight 207 kg

Condition: used, Year of construction: 2014, operating hours: 21,476 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 510 mm, We offer this used AGIE Charmilles CUT 400 SP wire erosion machine, manufactured in 2014. Type: CUT 400 SP Serial number: 001.018 Year of manufacture: 2014 Technical data: Travel ranges (X/Y/Z): 750 x 500 x 510 mm Fgedpfx Apez A R H Uj Dsh High-precision machining with excellent surface quality Automatic wire threading system (AWT) Modern CNC control with intuitive operation Stable machine construction for maximum accuracy Year of manufacture: 2014 Condition & Equipment: Regularly maintained Fully functional and ready for use Inspection and test run possible upon agreement Special features: Due to the large travel ranges, the machine is particularly suitable for larger workpieces and versatile applications in single-piece and series production. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner Fsdjx E Rd Dopfx Ap Dsgh After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.