Used Wpm Wpm 400-C for sale (65,771)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul Csdjyuuzdopfx Abxjrf PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: ready for operation (used), A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible. Cedpfx Abjyn Nzfjxjrf

Condition: good (used), Year of construction: 2006, Clamping force: 150 tons Crsdpszatfrjfx Abxof Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 470 mm Mould clamping plattens (b x h) : 650 x 650 mm Ejector stroke: 175 mm Screw diameter: 40mm Injection volume: 201 cm3 Shot weight: 184 g Working hours: 33.165 h Core pullers: 1x Air blast: 1x Robot interference: yes

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Cjdpfsxqfi Ajx Abxorf Working hours : 138000 h

Condition: excellent (used), Year of construction: 1985, Control: Philips B2T Swinging diameter: 640 mm Machining diameter, longitudinal: 550 mm Machining diameter on the turret: 450 mm Cjdpfozpy Rrox Abxorf Turning length: 1000 mm Spindle speed: 2,240 rpm Spindle bore: 103 mm 12-position turret, VDI 60 Chip conveyor

Condition: used, Year of construction: 2008, offer consists of: laminating machine Gemini C 400 A with jogger - developed for a digital printing machines outputs lamination - pneumatic system of laminating rollers pressure with an easy thrust control - Anti-Curl-Mechanic Technical details: - feeder: flatpile feeder; loading height: 230mm - Format: min. 320x250mm; max. 380x580mm - Paperweight: 115-350g/qm - film: 20-45 µm - film-types: OPP, Nylon - Inner diameter roll: 70-80mm - outer diameter roll: max. 400mm Codpfx Aezpwkvobxjrf - capacity: 0-15m/min; max. 1800 sheets/h with Format B3 - warming up time: approx. 10 Min - weight: 365kg - power supply: 230 V, 2,3kW, 16A - floor space: : 74 x 280 cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Year of construction: 2006, Arburg 320 C 400-170 Injection Moulding Machine Year of manufacture: 2006 Clamping force: 40 t Screw diameter: 30 mm Crjdpfx Aoxwu R Nebxjf Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating power: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Crsdpfjzkfh Ssx Abxef Includes temperature control unit Includes handling robot The machine is in very good condition and is operational.

Condition: used, Manufacturer: Multivac Crjdpfxet Up Rre Abxof Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg

Condition: new, Year of construction: 2026, Key features 5 functions in one machine Straightening width: 400 mm Sealing width: 400 mm Max. sealing height: 220 mm Crsdpfxozl Nz Ss Abxef Saw blade diameter: 300 mm Cutting height: up to 100 mm (90°) Saw blade tilt: 0–45° Sliding table: 1800 mm Router: spindle Ø30 mm, 4 speeds Drill (mortiser): chuck 16 mm Motor: 3 × 3.0 kW (option 3 × 4.0 kW) Power supply: 380 V Weight: approx. 645 kg Advantages Robust cast iron construction Precise aluminum sliding table Fast function change High processing accuracy Suitable for professional woodworking shops Reliable operation with minimal maintenance

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Cjdpfx Aexvy Rljbxsrf Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Condition: used, Year of construction: 2008, operating hours: 20,113 h, power: 42 kW (57.10 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 79 A, We are offering this used Arburg 470 C 1500-400 injection molding machine, manufactured in 2008. Machine No.: 208586 Csdpfxszn H Axj Abxerf Year of manufacture: 05/2008 Operating voltage: 400 V Operating voltage frequency: 50 Hz Control voltage (AC): 230 V Control voltage frequency (AC): 50 Hz Control voltage (DC): 24 V Motor rated current: 59 A Heater rated current: 20 A Total current: 79 A Total connected power: 42 kW If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard Crodpfx Abeyq Stioxsf levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck Cedpfx Asxzuu Ajbxsrf toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, functionality: fully functional, empty load weight: 369 kg, maximum load weight: 1,131 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 401 mm, loading space width: 1,840 mm, Year of construction: 2026, MARTZ Unilader 400 C 1.5T NEW VEHICLE Internal dimensions: 401cm x 184cm Total weight: 1300 Kg Payload: 1131 Kg Braked single-axle low-loader 1500 Kg KNOTT axle with overrun brake, reversing aid, and parking brake Bolted and galvanized steel frame Drawbar, foldable With hydraulic support 15mm thick, robust and non-slip screen-printed plywood floor 13-pin electrical system Plastic mudguards Support wheel 13-inch M+S tires Numerous lashing points Front marker light Rear lights with reversing light and triangular reflectors Foldable license plate holder 2x U-shaped chock Optional accessories: - 100 km/h upgrade - Rear supports - Aluminum side panels - Drive-over tailgate - Motorcycle support rail - Crank attachment to create a continuously adjustable tilting angle - Coarse or fine mesh net - Spare wheel with holder Cjdpfx Abjzkrmhjxerf More accessories available upon request! Images are for illustrative purposes and may show accessories that are subject to an additional charge. Plus vehicle registration document and freight to Gera: €150 net Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. Wide range of rental trailers available. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to us.

Condition: as good as new (ex-display), rotating center Manufacturer: Bulmak Type: C 400 TS Csdef I Smzspfx Abxsrf Height: 160 mm Height from clamping surface to center of rotating center: 160 mm Maximum shaft diameter: 110 mm Weight: 14 kg

Condition: used, Year of construction: 2020, gebraucht 2020 1658 prompt, Zwischenverkauf v Bulgarien 26500 € 1 22600 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 Codpfswirdtsx Abxjrf 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 37,910.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2020, operating hours: 8,555 h, functionality: fully functional, clamping force: 1,500 kN, heating capacity: 19 kW (25.83 HP), pump power: 71 W, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 90 A, We are offering this used ARBURG 470 C 1500-400 injection molding machine, manufactured in 2020, from ongoing production. Includes INTEGRALPICKER. Type: 470 C 1500-400 Machine No.: 254634 Year of manufacture: 05.2020 Operating voltage: 400 V, 50 Hz Control voltage: 24 V Rated current motor/heater: 71 / 19 A Total current: 90 A Total power consumption: 53.5 kW Operating hours pump: 8555 Price: €48,000.00 Csdpfx Abezhar Hexorf Available from September 2026. If you have any questions or require further information, please send us a message or call us.

Condition: used, mileage: 8,00,000 km, power: 294 kW (399.73 HP), first registration: 04/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro3, loading space length: 6,550 mm, loading space width: 2,540 mm, Year of construction: 2006, Equipment: ABS, air conditioning, crane, Volvo FH 13 400 / 6x2 Platform 6,55 m + CRANE Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2006 ? MILAGE: 800 000 km EQUIPMENT: ? ABS ? C. LOCKING Csdpfx Aoymvhvsbxjrf ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 655 x 254 (L x W ) HEIGHT FROM THE GROUND : 90 CAPACITY: 13 500 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 280/140 cm TIRE SIZE: FRONT : 385/55R22,5 BACK : 295/60R22,5 SUSPENSION: AIR CRANE: HIAB XS 200 C - 5 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 9857

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Credpfx Asufr H Ajbxof

Condition: new, Precision cycle lathe with Siemens Sinumerik 828 D control Manufacturer: GDW Model: C 400 Z conturline with quick-change tool holder size B Condition: Brand new machine Meets the highest safety standards Standard equipment includes: - LED tube work light - Electromechanical holding brake for the main spindle, programmable or switchable via push button on the operator panel - Coolant system - Quick-change tool holder size B, incl. one turning tool holder size B - Reducing sleeve for main spindle internal taper ME 70 / MK 4 - Protective flange for spindle head DIN 55027-6 - 2 fixed center points MK 4/5 Crodsxy Rw Rspfx Abxof - Set of operating tools with tool bag, set of keys, grease gun - Operating manual with spare parts lists, electrical documentation in print and on CD

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, welding current at 60% duty cycle: 370 A, welding current at 100% duty cycle: 300 A, welding current (max.): 400 A, Equipment: documentation/manual, type plate available, Migatronic Sigma One 400 C, water-cooled Crsdpfxozdkude Abxsf 3 years old, barely used.

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." Codpfozcpnzex Abxerf komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website. Cjdpfxow E Itie Abxjrf

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Crodpfx Abouladksxjf