Used Xomox 716301-5 for sale (59,412)

Year of construction: 2009, condition: like new (used), Tuflin chick valve, DN 80, with pneumatic actuator and electric switching module Manufacturer: Xomox Nominal size: DN 80 Material: 1.4408 (V4A) Pneumatic actuator: Pgodpfxod Rww Ie Airsu Part No.: 716301-5 Article No.: XRP-RO53800148KXD40 Year of manufacture: 2009 Pmax (psi): 5/70 QSP: 8 In very good condition! Tuflin chick valves, some unused, therefore in new condition!

Condition: used, Year of construction: 2005, operating hours: 10,329 h, functionality: fully functional, overall weight: 12,000 kg, Equipment: documentation/manual, Manufacturer: Fidia Type: K 165 Type: 5-axis machining center Technical data: Year of manufacture: 2005 Psdpfx Aioz Rmn Serjgu Table size: 1400mm x 820mm X-axis travel: 1000 mm, Y-axis travel: 620 mm, Z-axis travel: 700 mm Control system: Fidia C 1 Maximum table load: 2000 kg Spindle speed: 30000 rpm Weight: 12000 kg You can view the technical details as a PDF.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering a top-quality Jungheinrich forklift; it underwent a complete "5-Star" refurbishment by Jungheinrich in 2021 and has logged only 45 hours since that time. The paintwork is original and has not been repainted or touched up! The forklift has always been stored indoors and is in excellent condition. Maintenance and safety inspections (UVV) are up to date. The manual and keys are, of course, included. Last major service: October 2024 Safety inspection (UVV) valid until: 10/2025 Operating hours: 7,792 (7,744 since refurbishment) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-Star refurbishment: 03/2021 (complete), including Kaup fork positioner T466 Load capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: Triplex mast including full free lift Equipment: Solo-Pilot control, road-legal lighting (StVZO), LED lighting (2 front and 2 rear work lights), front/roof/rear cab windows Steel doors, leather seat, rearview mirror, armrest, auxiliary hydraulics (2 functions) Kaup fork positioner (NEW): 4.8T 466B The vehicle has run for only 45 hours since its refurbishment; all safety inspections and maintenance work have been carried out. Pjdpfszn Uv Tex Airegu Please feel free to contact us if you have any further questions!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible Psdjzukurjpfx Airogu The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Pgsdpfx Aew N Iz Hoireu Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Year of construction: 2005, condition: used, Breton 5-axis milling machine, complete with camera, conveyor belts, and infeed roller table. Pgsdpoz I D Atsfx Airou

Condition: excellent (used), functionality: fully functional, Haeger 618 MSPe-5 Pjdjz Rxkfepfx Airegu Year of manufacture: 12/2023. The system has been fully overhauled and serviced and is in perfect working order. The system can be inspected at any time.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Pedjxxu Drepfx Airjgu

Condition: excellent (used), Year of construction: 2020, operating hours: 96 h, Size 72 x 102 cm, Presscenter XL 3, Axis control, Wallscreen, Autoplate Pro, Preset Plus feeder, Preset Plus delivery, Program-controlled washup for ink, blanket, and impression cylinders, Non-stop feeder, Intercom, Double sheet detector, Extended delivery X2, IR dryer, water-cooled, Heidelberg Cleanstar, Weko AP 500 powder spray, Anti-static system in feeder and delivery, Airstar Pro, Chambered doctor blade coating unit, Machine is elevated 500 mm. Pgodpfxe Agnh No Airju Machine no.: 552120, Impressions: 98 million.

Condition: excellent (used), Year of construction: 2016, operating hours: 170 h, Size 72 x 102 cm, Presscenter, Wallscreen, program-controlled washup system for rollers, Preset Plus feeder, Preset Plus delivery, Autoplate, blanket and impression cylinders, chambered ducter blade coating unit, non-stop feeder, extended delivery X3, Heidelberg IR dryer, UV dryer at the end of the press, anti-static system in feeder and delivery, Heidelberg Cleanstar, Weko AP 500 powder spray system, Airstar Pro, machine is elevated 500 mm. Pgsdpj Agnifjfx Airou Machine no.: 551581, impressions: 165 million.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), type of cooling: air, Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Pgjdpfx Asvllxdeirou Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200065, overall weight: 184 kg, power: 0.3 kW (0.41 HP), type of input current: AC, We offer this used OMEC BC-5 nailing bench, year of construction 2020. Year of construction: 2020 year Machine type: BC-5 Serial number: 200065 Power: 0.3 kW Voltage: 220 V Frequency: 50 Hz Weight: 184 kg Phases: 1+N If you have any questions or need more information, feel free to send us a message or give us a call. Peds Afn Diopfx Airegu

Condition: excellent (used), functionality: fully functional, KBR reactive power controller, complete unit installed in the control cabinet. GSR 75 / 5. 75 kVAR. Podpfxs Agnwls Airjgu

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Pgedpfx Aiezhaqcjrsu

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Pgjdpfx Aisvbdpyorou Width (mm) 485 Depth (mm) 920

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 25.0122, For sale is a highly precise CNC turning and milling machine, type Benzinger TNE5, manufactured in 2007. Benzinger machines are known worldwide for their exceptional mechanical rigidity, extreme repeatability, and durability. They are particularly used in the watchmaking industry, medical technology, precision engineering, and optics. This model is ideal for the complete machining of complex precision parts from bar stock or in a chuck. Thanks to its robust design and excellent thermal management, the machine is perfectly suited for tight tolerances and hard turning. Equipment: - Siemens Sinumerik control - 2 x 12-station turret - Knoll 200S-1/200 chip conveyor, year of manufacture 2006 Pedpfe Adz Acox Airegu - High-pressure hydraulic unit Terms: - ex works. Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. On request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and on-time process so that you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and expert advice. Subject to prior sale, changes, and errors!

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. Pgjdpfs Afznusx Aireu For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, 5 units Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Pgsdpfjzz Rfqjx Airou Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers 5 towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2016 Working area and travels: X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm Pgsdpfx Ajzdityoireu A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Pgjdpfxez R I U Io Aireu Best regards, Ihor Balychev.

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. Pedpfxs Agghlj Airsgu HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 30 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 550 mm, cutting width (max.): 620 mm, control type: CNC control, roller diameter: 550 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,600 mm, total length: 3,940 mm, total width: 2,300 mm, overall weight: 7,700 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA THOR 5 | 2025 | TCT HIGH-PERFORMANCE SAW | 32% SAVING TOP MODEL FROM PEGAS-GONDA – CNC HIGH-PERFORMANCE BAND SAW FOR CARBIDE-TIPPED SAW BLADES! We offer a PEGAS-GONDA THOR 5, model year 2025, directly from our showroom. The THOR 5 belongs to the top class of our production range. It was specifically developed for highly productive sawing of solid materials with carbide-tipped saw blades (TCT technology). The extremely robust construction, the powerful 15 kW drive, and the intelligent cutting control enable high cutting performance, precision, and low vibration. SPECIAL PRICE – 32.3% SAVING! New price: 127,008 EUR Our price: 86,000 EUR plus VAT You save 41,008 EUR! TECHNICAL DATA Model year: 2025 – Demo machine Fully automatic CNC two-column band saw Cutting range, round: 550 mm Cutting range, rectangular: 620 × 550 mm Straight cuts 90° Saw blade: 7680 × 54 × 1.6 mm Band speed: 15–150 m/min Main motor: 15 kW Weight: approx. 7,735 kg SIEMENS SIMATIC S7-1200 PLC SIEMENS TP700 Comfort Touchscreen Servo-controlled saw feed with ball screw drive CNC material feed: 3–750 mm per stroke Multiple feed: up to 19,999 mm Hydraulic material clamping and band tensioning HIGHLIGHTS OF TCT TECHNOLOGY Optimized for carbide-tipped saw blades Highly productive cutting of solid materials Low-vibration, heavy-duty construction with polymer concrete filling Automatic cutting control ASR (ARP/RZP) Automatic cutting path control KKR Automatic material feed and programmable cutting cycles Integrated chip conveyor Ideal for industrial series production 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of recognized warranty claims, the buyer only bears the travel and mileage costs of the technician. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician labor: 50 EUR/hour (outside the warranty) Pgjds Aa Drfjpfx Airju DELIVERY AND SERVICE Price: 86,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport, installation, and operator training for an additional fee, according to our service rates. ORIGINAL ACCESSORIES Original PEGAS-GONDA accessories and roller conveyors available. We will gladly prepare an offer for a complete high-performance sawing station. YOUR ADVANTAGES: TCT high-performance technology 15 kW drive for demanding cuts Fully automatic CNC operation Directly from the manufacturer 41,008 EUR price advantage 6 months warranty Immediately available Contact us for more information or to arrange a viewing! PEGAS-GONDA – directly from the manufacturer.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Fitotron® modular plant growth chambers, Type HGC 1014 V, incl. HQI-T and Krypton lighting module Temperature range +5°C to +45°C for temperature testing Test chamber volume approx. 1300 L Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers feature a modular design. Individual modules can be added or exchanged as needed, allowing the units to be adapted for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption (without fresh air operation at 25°C / 75% RH): approx. 0.8 kW Pedpjzpv Iaofx Airjgu Specifications for climatic testing with irradiation Temperature range: +10°C to +45°C (with lights on) Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Humidification and dehumidification system; stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door unit with observation window Interface for computer connection Power supply: 3/N/PE 400V ±10% 50Hz CE marked, mobile, very good condition Cable/pipe port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg (lighting module) Four units of this model are available for sale. Please feel free to contact us if you have any further questions.

Condition: like new (used), Year of construction: 2008, operating hours: 104 h, functionality: fully functional, machine/vehicle number: 42603/08, pressure: 8 bar, operating pressure: 6 bar, total width: 3,000 mm, total height: 5,200 mm, total length: 6,800 mm, inner dimension width: 1,100 mm, inner dimension length: 6,800 mm, inner dimension height: 500 mm, filter area: 1 m², input current: 95 A, input voltage: 380 V, control cabinet width: 1,200 mm, control cabinet length: 500 mm, control cabinet height: 2,200 mm, air pressure: 8 bar, passage height: 500 mm, space requirement width: 4,000 mm, space requirement length: 9,000 mm, space requirement height: 6,000 mm, power: 50 kW (67.98 HP), conveyor belt width: 1,100 mm, Rösler Shot blasting machine RRB 11/5, we used this machine only like backup. That are the reason why is working time very low and machine are completely correct. Pgjdst N Sz Aopfx Airsu

Condition: used, Year of construction: 2001, machine/vehicle number: .01720, with CNC control, manufactured by FIDIA, type: C20, travel ranges: X-axis: 2400 mm, Y-axis: 2850 mm, Z-axis: 1000 mm, with automatic tool changer with 20 tool stations, with T-slot clamping plate, size: approx. 2000 x 1800 mm, coolant system. Pjdpfx Ae Af Nlmjirjgu