Crane

MAN 1620K4-RCS | 2024

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet Credju Rni Hspfx Abzof *

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,000 kg, lifting height: 25,000 mm, Year of construction: 2023, operating hours: 1,336 h, total length: 8,830 mm, construction height: 3,150 mm, drive type: Diesel, load capacity: 6,000 kg, construction width: 2,530 mm, Rotating telescopic handler Crodpfxoumvfyo Abzsf Speed class: 40 Technical condition: very good Description: The Magni RTH 6.25 is a versatile rotating telescopic handler for assembly, lifting, and material handling on construction sites and in industrial applications. With a lifting height of up to 25 m, a lifting capacity of 6,000 kg, a large reach, and a rotating upper carriage, this machine is ideally suited for working at height and in confined spaces. Robust, powerful, and easy to operate. High off-road capability for a wide range of applications. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are continuously serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; Credpfxop Stgnj Abzof - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min Crodpfx Asuagxpobzef total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Crjdega T Dpspfx Abzof Max. bending angle ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: used, mileage: 3,40,000 km, fuel type: diesel, axle configuration: 6x2, color: orange, emission class: euro6, Equipment: ABS, air conditioning, differential lock, tachograph, Iveco Stralis AD 260S36 6x2 – 2016 – Euro 6: - First registration: 2016; - 360 hp engine - Euro 6; - Approximately 340,000 km; - Three axles 6x2; - Intelligent (steerable front/rear) third axle; - Manual transmission; - Rear air suspension; - Low-profile tires 315/70 R 22.5; Codezclhkspfx Abzsrf - Gross vehicle weight 260 quintals; - Payload approximately 146 quintals. Accessories: - Differential lock, air conditioning, electric windows, electric mirrors, ABS, ASR, pneumatic driver's seat, sun visor, cruise control, rear cab wall with window, radio, battery disconnect switch. Equipment: - Platform with an internal length of approximately 8.25 m, inclined rear overhang, winch, and split rear hydraulic ramps with a hydraulic translator. The vehicle is available for inspection and test drive at the following company: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Area) 37067 Valeggio sul Mincio (Verona) Tel. 045-7950955. Please contact us to schedule an appointment in order to best organize access to the facility. For further information, technical clarifications, and to learn the sale price of the vehicle, please contact our sales managers directly at 045-7950955. Note: Please note that the vehicle description is intended as a guide and may contain errors or inaccuracies. Interested parties are required to verify the exact specifications of the vehicle before proceeding with the purchase. PSL Autocarri Srl declines any responsibility for any errors or inconsistencies contained in this descriptive sheet. Note: We only respond to information requests that include the applicant's name and telephone number.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,274 h, load capacity: 8,000 kg, lifting height: 26,600 mm, fuel type: diesel, construction height: 3,120 mm, empty load weight: 22,500 kg, total length: 8,250 mm, drive type: Diesel, arm reach: 23,100 mm, construction width: 2,530 mm, Rotating telescopic handler Csdpfxovgi A Nj Abzorf Speed class: 40 Technical condition: very good Description: The Magni RTH 8.27 is a powerful rotating telescopic handler for assembly, lifting and material handling on construction sites and in industrial applications. With a lifting height of up to 26.6 m, a lifting capacity of 8,000 kg, the continuously rotating upper carriage and all-wheel drive, the machine is ideal for heavy loads, work at height and operations on difficult terrain. High reach and excellent off-road capability. Robust, powerful and easy to operate. Further information and a non-binding inquiry can be found on our website - Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sale, service & repair. With us, you get everything from a single source. Lease-purchase, financing and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm plate thickness . mm 8mm distance between columns . mm Crjdpfx Abjq Dta Ijzsf

Condition: ready for operation (used), Year of construction: 2002, Vehicle description: Diesel side loader forklift JUMBO 50/12/45 Csdpfx Absid R Dnezorf Year of manufacture: 2002 According to the meter: 3,724 operating hours 5-ton lifting capacity 4.5-meter lifting height 1.2-meter fork length Selling price: EUR 21,950.00 net Affordable delivery also possible!

Condition: new, Year of construction: 2024, Genie GS4069DC electric scissor lift, new, used, demonstration machines available Codpfx Abevm U Haezsrf