Tipper truck

MAN TGS (TG3) 33.470 6x6 H BL 6x6H, Anh.-kipphydraul

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place Blsdpfxjfg E Hpo Addor the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, mileage: 10 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 3,900 mm, loading space width: 2,040 mm, loading space height: 400 mm, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, German new vehicle: * Unregistered * Euro 6 * 6-speed gearbox * 3 seats * Gross vehicle weight 3,500 kg * ABS + ESP * Driver airbag * Cruise control * Reinforced rear axle suspension * DAB radio with Bluetooth and steering wheel controls * Central locking with remote control * Electric windows * Electrically adjustable/heated exterior mirrors * Trailer coupling with 3,000 kg towing capacity Three-way tipper: Subframe: Steel, hot-dip galvanized * Floor: Galvanized steel sheet * Operation: Electro-hydraulic with remote control * Aluminium side walls, 40 cm high Bsdponq Eh Ujfx Addslr * Mesh leaf guard extension, 58 cm high, swingable * Lashing eyes in the floor * Internal dimensions approx. LxWxH 390x204x40 cm Load securing equipment also available from us: * Tension and lashing straps * Cargo bars * Safety vests * Transport boxes * Edge protectors * Airbags for load restraint * Wheel chocks * etc. Financing and leasing available We manufacture superstructures of any size for any chassis. Tarpaulin, GRP sandwich, aluminium lightweight construction Visit us at: Superstructures - Complete vehicles - Trailers - Consulting - Financing Errors and prior sale excepted; no liability for typing or input errors.

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER -1x 9 ton SAF or BPW axles -100% galvanized / 100% galvanized -GVW: 19.500kg -Empty weight: approx. 5500kg -Wabco 2S-2M EBS brake system -Aspöck 24V electrical system - EU standard -Air suspension -Hydraulic cable winch Hammerwinch 8t with radio remote control Blodpfx Adskbyt Ioder radio remote control (Teleradio) -Hydraulic rear extension in full width 2550mm and length 1500mm -Length: 11800mm -Length with extension: 13300mm -Width: 2550mm -Saddle height: approx. 1050mm - 1150mm (other saddle heights also possible) -Tire brand: Goodyear, Pirelli or Continental dual tires Spare wheel with spare wheel holder 24v 4.5KW electro-hydraulic motor for cable winch, loading platform and rear extension Modifications possible according to customer requirements Paint finish freely selectable / free of charge All documents COC,Tüv,etc. for registration available. For more info: kalepar *The pictures are example. Copyright cannot be claimed. ---

Condition: good (used), Tailstock Quill size: MK 2 Quill stroke: 30 mm height-adjustable Tip height of 250-285 mm Bljdedlp Txjpfx Addjr of - 5 degrees to plus 15 degrees of tilt Floor area 230 x 155 mm Weight 27 kg

Condition: new, empty load weight: 11,000 kg, maximum load weight: 25,100 kg, overall weight: 36,100 kg, axle configuration: 3 axles, suspension: air, tire size: 215 75 17,5, KLP 334V3 Truck Transporter 3x SAF axles (1st axle lifting axle, 2nd fixed axle, 3rd self steering axle) Total weight: 35,500 kg Payload: 10,500 kg Empty weight: 30,000 kg Total length: 13,600mm + 1700mm Hydraulic extension rear length: 1100mm Extension in the middle up to 1700mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 245/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. 5th wheel height: approx. 950mm - 1150mm (other saddle heights also possible) 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements. Paint can be freely selected / free of charge. Netto export possible. Blsdpekqmuiefx Addjr

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 30,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 9,800 mm, loading space width: 4,500 mm, loading space volume: 48 m³, suspension: air, tire size: 315.80 r 22.5, color: blue, Year of construction: 2017, Equipment: ABS, sem tecnokar, year 2017, 48m3 aluminum tipping tank with 10 tires, 3 disc axles with 1st liftable and 3rd steerable, ebs, electric sliding discover cover, stainless steel chests, alloy wheels, watertight flag overhead hatch, excellent condition, INTERDRIVE SRL-PARMA CONCESSIONARY Blodpetvplcsfx Adder

Condition: new, functionality: fully functional, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, wheelbase: 4,325 mm, overall weight: 3,500 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, number of seats: 8, Year of construction: 2025, fuel: diesel, machine/vehicle number: NEW-36, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, summer tires, traction control, trailer coupling, truck registration, MB Sprinter 319 Bluetec - BusConcept Premium 2025 - Seats: 8 / 6+2 New vehicle. Unregistered, with 2-year warranty. The vehicle comes with all necessary documents and a European COC certificate. Since 2005, we have been active on the European market, specializing in the manufacture of luxury coaches and commercial vehicles. Our company offers tailor-made products made from high-quality materials and modern technological solutions. Our goal is to set new trends in the industry, promote Polish engineering, and create unforgettable, legendary travel experiences. Full equipment available on request. Photos serve as examples of available order vehicles. If you have any questions, I am always at your disposal. Available for delivery in 2-3 months. - Contact us: Auto-Wardenga Bedpfxei Ei Syo Addslr Irenäus Wardenga – also available via WhatsApp

Condition: good (used), functionality: fully functional, empty load weight: 7,900 kg, maximum load weight: 30,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2007, loading space length: 10,000 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 60 m³, suspension: air, tire size: 385.65 r 22.5, color: silver, Year of construction: 2007, Equipment: ABS, Smr 60m3 aluminum tecnokar tank tipper, rear with sealed overhead door, front vibro motor, 3 disc axles with 1st liftable and steerable, hydraulic couplings, uncover cover with manual handling cloth, stainless steel box, air suspension, year 2007, overhauled until 30.11.2024-CONCESSIONARY INTERDRRIVE SRL-PARMA Bodpfx Aetpm Tmoddjlr

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice Bljdpfxofgyigo Addor equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, Year of construction: 2022, Disc section 510 mm serrated Hydr. working depth adjustment Disc section hydr. / working depth adjustment of the leveling unit C-Mix-Ultra tines for Ceus 50 / hydr. working depth adjustment Tine section with hydr. drawbar HD SCHAR 80 mm / (14/K1) Bledpfx Aetz Tplodder