Roll-off tipper truck

MAN TGS 26.400 Euro6 6x2 Meiller Abrollkipper

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Bjdpovgrh Uofx Agkjwi Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 6,725 h, load capacity: 2,800 kg, lifting height: 3,750 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, gearing type: hydrostat, fork length: 1,200 mm, tire condition: 90 %, fuel: diesel, Equipment: additional headlights, lighting, sideshift, immediate use forklift. mast standard: lifting height 3750mm lifting height: 2600mm equipped with: fork positioner and sideshift. full cab incl. air conditioning. working lights. only 6725 hours Bsdpfjtt N Hcex Agkowi

Condition: used, functionality: fully functional, mileage: 6,29,000 km, first registration: 10/2011, fuel type: diesel, empty load weight: 11,700 kg, maximum load weight: 26,000 kg, tire condition: 70 %, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 8,310 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, differential lock, fog lights, power mirror, trailer coupling, truck registration, Mercedes Benz Actros 2541 Roll-off tipper PRISMAG SA26L 6x2 Front leaf suspension - rear air suspension Differential lock Automatic transmission Bedpoyfg Rrjfx Agkewi GVW 26,000 kg – payload 14,300 kg Trailer coupling (permissible gross combination weight 44,000 kg) Euro 5 Total vehicle length: 8.31 m Wheelbase: 4.20 m ABS 3rd axle steerable and height-adjustable Tyres 70% 500L tank Fog lights Sun visor Central locking Air conditioning Air-suspended driver’s seat Electric windows and exterior mirrors All information provided without guarantee / errors and omissions excepted.

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, machine/vehicle number: 006424, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, This very young baler is sold by Bollegraaf Recycling Solutions. This is a HBC100 (75kW) baler featuring cross wires, FULL HARDOX, and a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are equipped with all possible options for maximum efficiency in baling all types of plastics. Both units were built in 2022 and have very few operating hours. The previous owner purchased a new Bollegraaf system and traded in the machines in question. After disassembly, this baler is sold with a 3-month warranty. HBC100K Baler (75kW) 390mm supports Intermediate hopper Conveyor chute Platform with caged ladder Additional photocells Bjdjxvh Ewepfx Agkowi Frequency controller for the main motor for energy savings APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) Cross wires (3 horizontal wires and 5 vertical wires) Full Hardox lining inside the baler Bale exit Hydraulic lifting mechanism for both knotting sections for improved accessibility/maintenance Bale length display Air conditioning on the control panel Chain conveyor frequency controller Hydraulic oil heater Hydraulic unit cooler 4G modem for remote support Chain conveyor Bollegraaf HBT 1200/1800*20400 Equipped with Bordoflex for extra chain protection Dirt discharge plate Supports Chain lubrication

Condition: reconditioned (used), Year of construction: 2014, operating hours: 24,967 h, functionality: fully functional, machine/vehicle number: 004283-0030, pressing force: 122 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, warranty duration: 24 months, year of last overhaul: 2026, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. Bwsdpfxjxcir Ej Agkji This is a baler HBC120s (90kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: used, mileage: 5,64,000 km, power: 300 kW (407.89 HP), first registration: 12/2008, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro5, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: crane, soot filter, Crane: ----- Retarder, air conditioning, lift and steering axle, Fassi 165-5 with radio remote control, trailer coupling Suspension: Bwsdpfx Agsycbh Hekei Air suspension

Condition: used, mileage: 2,15,767 km, first registration: 06/2021, color: white, MAN TGS 26.360, year 2021, white color, Euro 6, 215,676 km, wheelbase 4500 mm, short cab, low roof, 1st axle 8 tons, 3rd axle steered, ZF 16-speed manual gearbox, differential lock, air conditioning. Bodox Extyepfx Agkowi

Year of construction: 2018, operating hours: 2,875 h, condition: used, functionality: fully functional, fuel type: diesel, lifting height: 3,750 mm, free lift: 150 mm, mast type: simplex, construction height: 2,400 mm, fork length: 1,200 mm, drive type: Diesel, load capacity: 2,500 kg, Diesel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Bjdpfjv Nr Exsx Agkewi Mast Type: Standard Technical Condition: Good Front Tires Type: Super Elastic Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Rear Tires Condition: 60 - 80% Description: The vehicle is UVV (German Accident Insurance) inspected. The machine is serviced and cleaned before delivery. Upon request, the machine can be repainted. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, load backrest, road traffic regulations (STVZO), full cab, joystick, LED, seat,

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, total height: 1,000 mm, empty load weight: 158 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 9/18-4M HOT WATER WASHER Bjdpfx Ajw I Au Eogkowi This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 9/18-4M Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 400 - 900 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 6.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 158 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.