Crane

MAN TGS 26.500 6x4 Crane Truck with 19 t/m Rear-Mounte

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: red, driver cabin: other, gearing type: other, Year of construction: 2006, Equipment: central locking, crane, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, radio remote control, four hydraulic extensions Load diagram: 4.6m-4195kg, 6m-3091kg, 7.90m-2254kg, 10.10m-1720kg, 12.20m-1398kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ffjdoi Rp T Ijpfx Ag Rjt

Condition: used, Year of construction: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Year: July 2011 Pallet Size: 500 x 500 mm Movement: Fsdpfjv Tvh Ssx Ag Rsft - X: 730 mm - Y: 730 mm - Z: 740 mm Spindle Speed: 12,000 rpm Tool Changer: 40 positions Chip Conveyor: Chrome

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Ffjdpfx Ajv N Eiqsg Ret

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Fsdpfxsilhfcs Ag Rjft

Condition: good (used), Sorting Car / Sorting Crane Baljer & Zembrod Crane ASX1 Fedpfx Agjv I A Ihj Roft Inner track width: 2.5 meters With cross-cut saw (has not been used for a long time) With cutting rack With tracks With cable (1 year old) Immediately available Location: Austria, near Villach

Condition: used, mileage: 2,08,237 km, power: 129 kW (175.39 HP), first registration: 02/1993, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, total width: 2,500 mm, total height: 3,700 mm, loading space length: 4,000 mm, loading space width: 2,360 mm, loading space height: 590 mm, Equipment: ABS, all wheel drive, crane, Mercedes Benz all-wheel tipper with crane MB 1717 AK Atlas 100.1 Ffodpfx Aoqxcmteg Rst * First registered 02/1993, * Mileage 208237 km according to the meter reading, * 5958 cc with 129 kW 175 HP * 8-speed manual transmission, * Driver's cabin with 2 seats, * Tire size 12 R 22.5, profile 9-18 mm, * Total weight 18000 kg, empty weight 9550 kg, axle load front 6700 kg rear 11500 kg, * ABS, radio, differential lock, power steering, mooring chocks, * Dimensions in length x width x height 6700 x 2500 x 3370 mm, * Crane Atlas 100.1 range 12m 600kg, max 1.9m 5000kg, * 3 side tipper 4000 x 2360 x 590 steel side walls further details and additional pictures available on request, this description does not represent a binding offer and may contain errors, no guarantee for all information

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing Ffodpfx Asl Ikzgsg Ret of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, first registration: 09/2015, fuel type: diesel, axle configuration: 4x2, color: blue, Equipment: air conditioning, differential lock, Iveco Stralis AT 190S31 /FP 4x2: - First registration: 09/2015; - 310 HP engine - Euro 6; - Eurotronic automatic transmission; - Full air suspension; - GVW: 18,000 kg; - Digital tachograph. Features: - Differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, ASR, air-suspended driver’s seat, sun visor, fog lights, cruise control, sunroof, independent cab heater, spoiler, navigation system, battery isolator. Body configuration: - Curtain-side body measuring 7.20 x 2.47 m (internal dimensions) with 80 cm drop sides, sliding side curtains and rear doors; - Dhollandia 2,000 kg retractable tail lift with aluminium platform. Sale price: €40,000.00 (forty thousand/00) + VAT The vehicle is available for inspection and test drive at: Fsdpfx Agov Niz Dj Rjft PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona) Tel. +39 045-7950955. We kindly ask you to contact us to arrange an appointment and organize visit access in the best possible way. For further information, technical details, or to confirm the vehicle’s sale price, please contact our sales managers directly at +39 045-7950955. Note: This vehicle description is for information purposes only and may contain errors or inaccuracies. Prospective buyers are required to verify the exact specifications of the vehicle before purchase. PSL Autocarri Srl declines any liability for possible errors or discrepancies contained in this listing. IMPORTANT: WE ONLY REPLY TO ENQUIRIES INCLUDING THE ENQUIRER’S FULL NAME AND TELEPHONE NUMBER.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89037, workpiece weight (max.): 13,000 kg, PARALLEL LATHE CWGIIOOE 500x5000mm weight 13000kg. Machine complete with 4 independent jaw self-centering chuck mm 1000. Height of tips mm 500. Distance between tips mm 5000. Fjdpfxsvzxats Ag Rsft

Condition: new, Year of construction: 2024, Padeves trepe. Stepfeeder. For log feeding and separation Height from 1.0 m. Width from 1.8 - 6 m For material diameters from 5 - 20 cm Ffsdpfxoudzycj Ag Ret Speed up to 20 pieces/minute Hydraulic Automatic feed