Screw compressor

MANNESMANN DEMAG Sprint 025

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre Ijdpfx Aey T Hfgochjba – Installation height: 970 mm – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately – Hour meter: 306 hours (as of 26/6/2025) – Last service: 26 June 2025 – Condition: in very good condition, well maintained

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Ibedpfjwwlk Njx Achja

Condition: used, mileage: 1,001 km, first registration: 01/2009, color: red, driver cabin: other, gearing type: other, Year of construction: 2009, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, 1x hydraulic extension Load diagram: 2m-3000kg, 2.3m-2610kg, 3.5m-1900kg, 3.8m-1650kg, 5.4m-1160kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ibedpetd Hffefx Achea - .

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. Ibjdpfx Acjr A El Eohoa "Loose adhesion on the lower part of the dished end" (pictures to follow)

Year of construction: 2008, condition: not inspected (used), Emergency power generator Geko 6401 ED-AA/ZEDA, year of manufacture 2008, 2050 operating hours, diesel, 220/400 volts, serial number 100821, engine runs but does not generate electricity. Isdpfegqfxrjx Achjba

Condition: excellent (used), Year of construction: 2021, Thorwesten MPZ for standard profiles, as well as lift-and-slide door frames and sills, consisting of: Cutting center Thorwesten ASZ 4.2M in a special design. Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of lift-and-slide door frames. Infinitely adjustable cutting angles from 22.5° to 157.5°. Automatic optimization and processing of leftover pieces. Saw blade diameter 500 mm. Including dust extraction system and waste conveyor belt. Set up for Veka profile system, including widening and special profiles. Full HD panel with Windows 10 operating system. Thorwesten VT joining machine in a special design. Iedpezhi Nhefx Achjba Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of lift-and-slide door frames. Automatic profile transfer from the ASZ cutting center. Steel insert compartments. Chain compartments for automatic transfer to the PBZ machining center. Thorwesten PBZ 4.2M profile machining center in a special design. Processing length of 6,500 mm for standard profiles, as well as lift-and-slide door frames and sills, Veka 82 system. Equipped with an extended infeed and outfeed. Lifting rollers and running rollers under the drive belt for trouble-free transport of reinforced lift-and-slide door frames. Dynamic reinforcement screwing unit, as well as a second screwing unit from below on a separate servo axis. Set up for Veka profile system, including widening and special profiles, as well as Roto hardware system. Full HD panel with Windows 10 operating system.

Condition: new, For sale: a stock of new engines, approximately 1,500,000 kg. Sale in batches. Minimum order quantity: 50,000 kg. All engines are either new or used, but refurbished. Approximately 3,000 units. Various manufacturers: Siemens, ČKD, MEZ, etc. Isdpozgu D Iefx Achoba Price per 1 kg: 1.50 EUR.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. A dynamic screwdriver reduces processing times. Isdezfvf Ropfx Achoba

Condition: used, Year of construction: 1997, feed pressure 10 bar Iedpfjid S Trex Achoba liter capacity 1500 l Number of working hours 5111 h total power requirement 11 kW weight of the machine ca. 250 kg

Condition: new, Year of construction: 2018, functionality: fully functional, CHILLER – AS GOOD AS NEW!!! Manufacturer: Piovan Type: Aquatech CH50 Year of manufacture: 2018 Iedpfxewc I S To Achoba Connection power: 4.1 kW Cooling capacity: 7 kW Refrigerant: R407C The unit is practically new – only used for testing! PRICE REDUCED FROM 4250 TO 3650 EUR