Rotabloc System with Marelli generator

Marelli RotablocRBT System with Marelli MJB355

Condition: used, Year of construction: 2003, Two-way excavator designed for loosening and removing material, either for stockpiling or loading onto a transport vehicle. The machine is used in the following operations: - on railway and tram tracks - maintenance and trackside work - earthworks and roadworks Manufacturer: ATLAS Model: 1604 KZW Year of manufacture: 2003 Weight: 22,000 kg Dimensions: 5.9x2.5 m, height: 3.0 m Engine power: 90 kW Equipment: - air conditioning - Webasto heater - three-section boom - front and rear hitch - additional hydraulic outlet for a pneumatic hammer - reversing camera - four hydraulic side supports Fpsdpfxehutkfo Aatel - joystick control Technical condition: used, operational

Condition: like new (used), Year of construction: 2024, Twin lane linear weigher. All stainless steel. Fedpsx Hgb Isfx Aatspl

Condition: like new (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, overall weight: 17,000 kg, fuel type: diesel, tank capacity: 4,000 l, color: blue, power: 704 kW (957.17 HP), output current: 1,270 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 704 kW (957.17 HP), nominal power (apparent): 880 kVA, total length: 14,500 mm, total width: 4,500 mm, total height: 3,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, type of cooling: water, Brand: Elbe Type: MT-825 CA Year of manufacture: 2007 Serial number: 10330 Operating hours (read): < 500 Power (kVA): 880 Power (kW): 704 Engine brand: MTU Engine type: 16V2000 Engine power (kW): 720 Fuel: Diesel Alternator brand: Leroy Somer Alternator type: LSA49.1L9 C6 S/4 Fodpfx Asyt Dqleatjpl Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperage (A): 1270 Dimensions LxWxH (mm): On request Weight (kg) approx.: 17000 Quantity in stock: 1 Country of origin: Germany Remarks: Complete set ex Standby, available for inspection in our yard Sales conditions: As is/where is, functional take-out

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Fsdpfsfi Nmwox Aatspl Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Technical data: - Drilling capacity in steel ST 60 20 mm - Drill spindle holder MK 2 - Drill spindle stroke 120 mm - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive 380 V / 0.6 kW Fpedjtz T Dvspfx Aatol - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz Fsdpfswuyzwjx Aatspl 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: repair required (used), Disc chipper Bruks IDC000127 Fodpsvzw Tfsfx Aatspl - infeed 220 X 280 mm - without electric motor

Condition: used, Year of construction: 2014, operating hours: 50,399 h, machine/vehicle number: CAT00C15CLNA02056, fuel type: diesel, motor manufacturer: CAT C15, General information Field of application: Construction Weights Empty weight: 10.000 kg Fodpfx Aajzt Hk Totepl Functional Generator capacity: 625 kVA Dimensions of cargo space: 381 x 148 x 210 cm Other information Generator: Caterpillar Frequency: 60 Voltage: 600 Drill equipment: Control Panel Production country: UK Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel = Remarks = The voltage can be adjusted to the desired level, provided the voltage regulator supports that voltage.

Condition: good (used), Year of construction: 2016, BWT VT2000 Pure steam generator Fpodpjw Dykkefx Aatel Serial: V16010 2016, BTW Vapotron VT2000, max output 2200 Kg/hour steam, with Elmo Rietschle vac pump, all mounted on stainless skid, two in stock

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, cooling capacity: 40 kW (54.38 HP), type of input current: three-phase, type of cooling: water, overall weight: 650 kg, ambient temperature (max.): 42 °C, ambient temperature (min.): -25 °C, input voltage: 400 V, total width: 1,201 mm, total length: 2,046 mm, total height: 1,904 mm, power: 40 kW (54.38 HP), noise level: 58 dB, Equipment: compressor, Used chiller Workshop tested with current LEC seal Refrigerant R407c 2 compressors Fpodowi Imkspfx Aatsl 2 refrigeration circuits Water connection DN 50