Vertical machining center

Matsuura MAM72-25V PC 2

5-Axis Vertical Machining Center, used, year of manufacture 2007 / SN17224 / Control ON time: 66,963 hours

Control System
MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining

Travel

X-axis travel: 550 mm
Y-axis travel: 410 mm
Z-axis travel: 450 mm
B-axis: +110° to -110°
C-axis: 360°

Max. workpiece size: Ø250 x height 250 mm
Max. table load: 40 kg

Credpfowwk Dzjx Abcsh
Table indexing B- and C-axes: 0.001°

Pallet size: Ø130 mm
Max. workpiece size: Ø250 x height 250 mm
Max. pallet capacity: 40 kg
Pallet interface: Capto C6

Spindle
Speed range (standard): 50 – 15,000 rpm
Spindle taper with face contact: BT 40 JIS B 6339 Big+
Spindle motor power with FANUC drive: 7.5/5.5 kW
Max. torque: 65.1 Nm up to 1,100 rpm

Rapid Traverse and Positioning Speeds
Rapids:
Rapid traverse X, Y, Z axes: 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Feeds:
X, Y, and Z axes: 1 - 50,000 mm/min
B-axis: 30 rpm
C-axis: 50 rpm

Tool Changer
Max. tool weight: 10 kg
Max. tool diameter (all stations filled): Ø96 mm
Max. tool diameter (with adjacent stations empty): Ø150 mm
Max. tool length: 300 mm

Guides
Axis guideways: Roller guides
Lubrication: Permanent grease lubrication
Ball screws
Ball screw diameter X, Y, and Z axes: Ø36 mm
Pitch: 16 mm

Axis Drives
Power X, Y, Z axis: 4.5/4.5/5.5 kW
Power B and C axis: 4.5/2.5 kW
Axial force X, Y, Z axis: kN

Space Requirements* (standard machine)
Machine height above floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm
*Dimensions may differ for this particular machine!

Machine Weight
Standard machine: 7,800 kg
Machine with PC-2: 8,600 kg

Connections
Total connected load:
Standard machine: 32 kVA
Machine with PC-2: kVA
Connection voltage: 3 x 400V, 50 Hz
Compressed air connection: 5.5 - 9.5 bar
5-axis simultaneous control


Expandability of tool magazine capacity from standard 30 to 40 tool positions

Pallet changer with 2 pallets, 130 mm diameter

Direct path measuring system (Heidenhain)
in X, Y, and Z axes, supplied with sealing air

Coolant Systems

KNOLL cooling system, consisting of*:

- 1 hinged belt or scraper chip conveyor with lift pump and chip removal to the operator side (Type: 500 K-1/10, year of manufacture 2010)

- 1 through-spindle coolant supply with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW coolant pressure, 3-switchable stages

- 1 external cooling with coolant pump, output 100 l/min at 1.4 bar

- 1 coolant shower with coolant pump, output 100 l/min at 1.4 bar

- 1 compact filter KF200, filter capacity 200 l/min

- 2 spiral chip conveyors in the machine, standard option

Measuring in the Machine

- RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, can be loaded into the spindle via tool changer

- OMRON pressure gauge for tool length measurement and tool breakage monitoring

Modifications and errors in technical specifications and information, as well as prior sale, are subject to change!

The listing was translated automatically. Translation errors are possible.