RFID dispenser

Melzer SL L-200

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, number of ink cartridges: 5, total width: 1,600 mm, year of last overhaul: 2024, input voltage: 220 V, working width: 1,600 mm, product width (max.): 1,600 mm, roll diameter: 1,600 mm, roll width: 1,600 mm, tank capacity: 3 l, HP Latex Printer 375 - 3 liter ink cartridges Only 4500 sqm Dwodpfxomcw Tlo Addjf Last complete service, including change of print heads - July 2024 Average maximum width - 1,63 cm; Soft RIP Caldera (without PC). Stand, media feed roller, media take-up roller and tension adjustment kit; High precision for material movement; Registration - automatic control of the fit on the sheet, including front/side; Maximum resolution 1200 X 1200 dpi; Automatic double-sided banner printing; 6 print heads - 2 for cyan and black, 2 for magenta and yellow, 1 for light cyan and light magenta and 1 for latex optimizer; Defective nozzle detection and replacement system. Banding elimination solution; Latex-based ink. Barrels of 3 liters; Resistance to scratching; Built-in spectrophotometer for ICC profiling and automatic calibration; Optimized solution for banding removal; Complete drying right inside the printer so that the product is delivered dry and ready for lamination or packaging; Low warm-up time 90 seconds; Automatic feed adjustment; Ink collector for printing on porous textiles. EXW - old price 9900 euro - new price 7900 euro without VAT

Condition: good (used), Year of construction: 1998, SANJO P 270 - 6C Age: 1998 Web-width: 270mm 6-color Flexo 1 x Varnish Unit Unwind Rewind One of the printing units, is for back side printing, and is very rare to find for this machine Lot of printing cylinders, aniloxes are coming with the machine Dedpfx Aegvg A Ijddowf DELAM RELAM TENSION CONTROL

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: FP-201610-09, product width (max.): 1,000 mm, working width: 960 mm, product height (max.): 4 mm, roll width: 1,000 mm, roll diameter: 1,500 mm, 4 color flexo print machine made in Korea, used for paper cup printing; Max speed 100m/min Max cardboard width - 1000mm Including: Dwsdpfx Adevkp Dnedsf 1) 7 sets of print cylinders, total 28 cylinders 2) 8 aniloxes 3) Printing plate mount table with two cameras 4) Printing plate storage table

Condition: like new (used), Year of construction: 2022, Sunthinks HP Onepass digital printer is highly cost-effective printer specially designed for printing on corrugated cardboard. Dwodpfx Adou T I Npodjf * Model: Sunthinks SC1290 * Printhead type: HP heads (6 pcs) * Maximum resolution 1200x300DPI; 1200x600DPI; 1200x1200DPI * Printing speed 5/15/30 meters per minute * Print size 1290mm * Sheet size 2500x9999 Printer is almost new. Available immediately directly from owner!

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Dwedpoxluukofx Addef

Condition: new, Year of construction: 2023, New flexo printing machine for printing 3-color corrugated paper with automatic feeding. KIKI 1200 Automatic 3 colors printing machine for corrugated board Colors: 3 colors Material: Corrugated board, Cardboard Printing width: 1200 mm Printing length: 800 mm Material thickness: 1.5mm-7mm Speed: Max. 60 pcs/min Feeding: Automatic Dedpfxjrg D Hpj Addswf Ink system: 3 pcs, Pneumatic pumps Production year: 2023  With motorized longitudinal register  Anilox cylinders, 3 pcs  Cliché holder cylinders, 3 pcs  Cliché holder hoist lifting NEW machine never used, we bought it as a demo machine from China and we made modifications on it for professional use.

Year of construction: 2014, condition: like new (used), functionality: fully functional, Polytype BDM 482 8 colour cup printer 2014 In excellent condition; only 18.500 hours made. Colours : 6 colorheads mounted. up to 8 colors possible. Maximum output/hour : 24.000 cups/hour Minimum cup diameter : 60 mm Maximum cup diameter : 190 mm Minimum cup height : 30 mm Maximum cup height : 160 mm Uv system : Uviterno Dwedpfx Adehbddkjdjf Pre treatment : Corona

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge Dwjdpfx Ajn D Ew Ijddsf

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, Dwedpfjk Hz Nqex Addjf the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2025, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Dwsdpfx Adsu Ia E Isdsf Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.