Used other printing machinery for sale (130)

Condition: good (used), Automatic cloth rewinder for offset printing machines Manufacturer: Vliesstoff Kasper Very good condition. 380V power supply, foot pedal control Device suitable for B1 and B2 format machines Lsdpfxozuryio Ag Ashk

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Lhjdpoh Nrh Ujfx Ag Aek Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Year of construction: 2006, condition: good (used), Fully operational GOODSTRONG GMC-TC 1600 paper/cardboard roll-to-sheet cutting machine, manufactured in 2006. The machine is designed for the industrial conversion of paper and cardboard rolls into cut sheets. The system features an automatic edge-guidance mechanism that ensures precise positioning of the paper web during cutting, while the double rotary knife assembly guarantees clean and accurate edges. Model: GOODSTRONG GMC-TC 1600 Year of manufacture: 2006 Roll (web) width: 400–1600 mm (16″–63″) Simultaneous cutting: Up to 4 rolls at once Paper/cardboard grammage: 40–700 g/m² Cutting length: Up to 3000 mm Maximum cutting speed: Up to 300 m/min Control: Microcomputer system, AC servo motor, touchscreen panel Automatic edge guidance web system Lhsdpfx Agjzt R Hfs Ajk Double rotary knife

Year of construction: 2020, condition: excellent (used), Laiyi LY-ASCP100-1800 is a single-sided extrusion laminating line for paper packaging applications, specifically for paper cups and bowls. The machine is designed to extrude a thermoplastic polymer directly onto a substrate and bond them together in a single, continuous process. Year of installation: 2020 Condition: very good Lhjdjzt Rzispfx Ag Aek Main technical specifications: Media width up to 1800 mm Laminating width 800 - 1700 mm Rewinder/unwinder diameter Ø1600–1800mm Media thickness 30-400 gsm Extruded resin: LDPE/PP/PBS/EAA (Screw No.1, 110kW, max 400kg/h) Coating thickness: LDPE 8 - 20gsm, PLA 25-45 gsm Machine speed up to 250 m/min 3 Corona units (12kW + 8kW + 8 kW)

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Lhodjyxfrpepfx Ag Aok Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, commercial printing The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: used, Model name: Videojet 1610 DH (Dual Head) Printing technology: Continuous Inkjet (CIJ) Number of printheads: 2 Maximum number of lines per printhead: up to 5 Printing speed (1 line): 293 m/min Printing speed (2 lines): approx. 146 m/min Printing speed (3 lines): approx. 81 m/min Ink type: Color-based ink (CIJ) Protection rating: IP65 (dust-proof and protected against water jets) Maintenance interval: up to 12,000 operating hours (preventive maintenance) Hose length, printhead to controller: Standard 3 m, optional 6 m Text memory / messages: 250 memory locations Lhsdpfsk H R Rxex Ag Aok Interfaces: USB, Ethernet, RS-232 (serial) Special features: Smart Cartridge™ System, CleanFlow™ Technology, Plug-&-Play printhead module Housing material: Stainless steel (suitable for harsh production environments) Operating temperature range: 5 °C to 45 °C Relative humidity: 10 % – 90 % (non-condensing) Power supply: 100–120 V / 200–240 V, 50/60 Hz Weight: approx. 25 kg Condition: Used Note: All technical specifications were taken from publicly available internet sources (e.g. manufacturer information) and are provided without guarantee of accuracy or completeness.

Condition: used, UV drying system Totalisator operating hours 1484 The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. No direct connection to the pre-machines/devices is required. It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed. Ledpfx Aezr I U Dog Aohk

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 04111010, We offer this very good Albo System AB AS1000 pile turner, year of construction 2005. Manufacturer: Albo System AB Lhedpozu R Tnjfx Ag Aok Model: AS1000 Construction year: 2005 Condition: very good Category ID: 672 Type: Pile turner If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2026, condition: used, consisting of: 1 KODAK APL robot, year of manufacture 2013, serial number: MP0068, 1 KODAK Magnus VLF Quantum 6383 V-Speed / MTA plate setter, year of manufacture: 2013, serial number: MT0694, 1 KODAK MERCURY 1550 plate developer, year of manufacture: 2006, serial number: ME9770, 1 TECHNO-GRAFICA EBO-HS-Ultra 1550 V3.0 dryer, year of manufacture: 2013, serial number: 13014, weight: 1,400 kg, High Speed 1550 - SPG HS 1550 V4.0 rinsing system, serial number: 13017, weight: 385 kg, conveyor system, consisting of: various roller conveyors. Lhodpfxozqzbnj Ag Aek

Year of construction: 2008, condition: ready for operation (used), A large format plotter ROWE RCS 6000-4 with a longitudinal and cross folding system ROWE ROWEFOLD 721-4 and a sorter, counter reading: 170,000 linear meters/ 97,000m². Lhodpspy Eu Hjfx Ag Ask

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Lhedpfou Afz Rsx Ag Aok

Year of construction: 2001, condition: ready for operation (used), A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible. Ledpezcp U Iefx Ag Aehk

Year of construction: 1986, condition: used, machine/vehicle number: 1968137, Hot stamping and thermal printing machine Plate size 250 x 250 mm Lhjdpfx Agobq Svaj Ask Stroke 160 (250) Pressing force 14 kN

Year of construction: 2005, condition: used, Equipment Twin Multi Disc unwind station MTD-AWS-OWK • 2 MTD-AWS-OWK Combination unwinding station • 1 MTD-ZSF-LI-MSD Lhedpsc Ihxrsfx Ag Aok Stack pacer LAT • 1 LAT-2:1

Condition: good (used), Built in: 1999-2004 100x print roll holder available Lhodpfx Asc R Dqxjg Aek

Year of construction: 1986, condition: used, Standard features Lhsdpfx Agsbi Uwfs Ask

Year of construction: 2006, condition: used, Rotation cutter Lhsdpjc Ihqiofx Ag Ajk Built in 2006

Year of construction: 1996, condition: used, Wind-up double Built in 1996 Lhsdoditlwspfx Ag Aok

Year of construction: 2000, condition: used, Turning- and Distibution Ledpfx Agoc R Rpqo Aohk Built in: 2000

Condition: used, Standard equipment Lsdebrix Njpfx Ag Aohk 1,220 mm working width.

Year of construction: 2000, condition: used, Mueller Martini 351.0412 unwinding station Built in 2000 Lodpoc Ruydsfx Ag Ajhk

Year of construction: 1999, condition: ready for operation (used), unwinding station Built in 1999 Ljdpfx Aodygu Ssg Aohk

Year of construction: 1990, condition: ready for operation (used), Delivery station Built in 1990 Lodpfsd H E Iwjx Ag Aehk

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Ledjgyzzuopfx Ag Aehk Paper weight . 115-350g/sqm.

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm Lodpfx Agol Dn N So Ajhk max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn