Chassis with cab

Mercedes-Benz Arocs 1736 AK 4x4 Chassis Cabin

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, Maximum Rotor Weight ---3000 kg (6613.87 lb) Kodpfx Aasr Dd Avsyolr Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: used, mileage: 1,73,900 km, first registration: 11/2000, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2000, Equipment: ABS, air conditioning, all wheel drive, compressor, trailer coupling, U 400 Municipal Kledpei R Ahmofx Aayer Winter service equipment EPOKE 2.0 cbm mounted spreader

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Ksdeqabiaepfx Aayelr Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Kjdsw E I Itopfx Aayolr Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 4012M-4212, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,200 kg, Equipment: type plate available, Technical Data: Machine type: Mitutoyo STRATO 9106 FAL-A910 Year of manufacture: 2001 Measuring range: 900 x 1000 x 600 mm Software: Mitutoyo Software v2.4.R11 Accessories: Probe head mount: Renishaw SP80 Probe head: Renishaw SP80 Additional accessories: calibration ball (ceramic), various probe styli and extensions, Renishaw change rack, fastening kit with 4 x SCP80 and probe holder Ksdpsqz T H Ajfx Aayjlr Modifications and errors in the technical data and information as well as prior sale are subject to change!

Condition: used, power: 210 kW (285.52 HP), first registration: 11/2007, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: white, gearing type: semi-automatic, number of gears: 8, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, electric window regulation, onboard computer, power assisted steering, soot filter, trailer coupling, = Additional options and equipment = - Tachometer - Rear electric windows - Radio/CD player - Reversing camera = Further information = Number of cylinders: 6 Engine displacement: 6,374 cc Unladen weight: 8,663 kg Payload: 3,837 kg Kledpevk Nqnjfx Aaysr Gross vehicle weight: 12,500 kg Max. towing capacity: 10,000 kg (unbraked 750 kg) Interior: grey MOT (main technical inspection): New TÜV upon delivery Number of keys: 2

Condition: used, mileage: 2,27,566 km, power: 130 kW (176.75 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 6,390 kg, maximum load weight: 6,110 kg, overall weight: 12,500 kg, axle configuration: 4x4, wheelbase: 3,050 mm, fuel: diesel, driver cabin: other, gearing type: other, emission class: euro5, suspension: other, number of seats: 2, total length: 5,100 mm, loading space length: 2,650 mm, loading space width: 2,000 mm, loading space height: 4,000 mm, Year of construction: 2012, operating hours: 16,641 h, construction height: 3,360 mm, Equipment: air conditioning, all wheel drive, hydraulics, onboard computer, trailer coupling, The Unimog U400 405/12 impresses with its versatility and robustness and is ideal for use in agriculture and construction. Powered by a powerful 4,249 cc diesel engine with 177 hp and the Euro 5 emissions class, it meets modern environmental standards. With a total mileage of 227,566 km and 16,641 operating hours, it is in good shape. The Unimog has a trailer hitch, air conditioning, a front PTO and municipal hydraulics, which support flexible attachment options. The vehicle was built in 2012 and has only been used by one owner before. With its compact dimensions - 3,360 mm in height, 2,360 mm in width and 5,100 mm in length - it still offers an impressive payload with a permissible total weight of 12,500 kg. The Unimog has a green environmental sticker, which allows it to be used in urban emission zones. Operating hours: 16,641 hours Only sold to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. Kljdpfjr Uzthex Aaysr

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Kljdpju Smd Eefx Aaysr Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a measuring system from Keyence, type XM- C1000 The measuring system is something special, as the points to be measured are scanned by hand Very user-friendly and intuitive system. Compact and easy to maintain Control unit and PC XM-1600 are included in the offer Also Measuring probe, exchangeable probes, alignment station, various clamping devices Clamping vice Mouse Touch probe Operating instructions On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Kljderq Ebiopfx Aayjr For further information or contact options, please visit our website

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Kledpfx Aasd I Aw Eoyjr Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Rotary basket washer Please feel free to contact for other details and options.