Curtain sider van

MERCEDES-BENZ Sprinter 316 Hebebühne

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical specifications: - Galvanized sheet steel construction - Space-saving thanks to compact design - Delivered ready for operation - ATEX - pressure shock resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller - Energy-saving motor of efficiency class IE4 - 4 large-capacity collection containers with insert bags - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning ('Jet' cleaning) with time-controlled regulation for filter surface regeneration - PLC control system with display, for 4 slide valves EPN 24V DC, 4 machine start contacts and 1 start for external automatic switch-on (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - Extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-tested - Manufactured according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - GS-HM-03 'H3' test passed - IE5 efficiency power pack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Rated volume flow (Vnenn): 6,927 m³/h at 20 m/s - Max. volume flow (Vmax): 8,000 m³/h - Negative pressure at Vnenn: approx. 3,100 Pa - Negative pressure at Vmax: approx. 2,300 Pa - Collection volume: 495 liters - Sound pressure level: < 73 db(A) - Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Hodpfx Asx H Dahsbhsp Original price over €30,000 Availability: short-term Stock location: 63934 Röllbach

Condition: good (used), Year of construction: 1993, Power generator is in good working condition. Technical details shown on machine plate. Hjdpjyh U Tqjfx Abhop

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 3,800 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% Hsdpfx Abjw Eqc Tehep Description: - FEM carrier incl. forks and load hook - € 2.650,00 - Earth bucket 2200 mm 1 m3- - € 1.998,00 - Adapter Euro mount - € 1.339,00 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, air conditioning, CE certificate, exterior mirrors, joystick, rotating beacon, windshield wipers, LED, Specifications: -load capacity 3800kg -lift height 10,0m -MAX gradeability 40% -unladen weight 7330kg -engine KUBOTA 79,5kw ( 107 HP ) -capacity 3769 cm³ -exhaust standard Tier4f -steering all-wheel steering / crab steering / front wheel steering -rear hydraulics - 40 km/h -air conditioning -air suspension seat -carrier plate with hydraulically operated quick coupler -steering indicator light

Condition: used, mileage: 2,66,109 km, power: 190 kW (258.33 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2019, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, * German vehicle from first owner Hodsyr A Akspfx Abhsp * MOT expired, steering gear leaking * Tow bar, 3,500 kg towing capacity * V6 engine, 2,987 cc * All-wheel drive * Reversing camera * I am happy to send you a video via WhatsApp * WhatsApp: * Polish contact, ????? ?????: * Sale on behalf of customer, no warranty, all information subject to change, sale subject to prior sale Additional equipment: Driver/passenger airbag, drive type: all-wheel drive, audio system Audio 20 (with touchpad), rear bumper step, electrically adjustable and heated exterior mirrors (both sides), 'Progressive' design and equipment line, trailer coupling wiring kit, driver assistance system: Agility Select / Dynamic Select (driving mode switch), driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: downhill speed regulation (DSR), driver assistance system: hill start assist, driver assistance system: traffic sign recognition, vehicle setup (online services / apps), electric windows front and rear, windscreen with upper band filter, heated rear window, auto-dimming interior mirror, Isofix child seat anchor points on rear seat, body/construction: flatbed, double cab, automatic climate control (Thermotronic), driver's knee airbag, comfort suspension (Agility Control), communication module (LTE) prepared for Mercedes me connect, head airbag system (windowbag), multifunction steering wheel, alloy wheels, Mercedes-Benz emergency call system, metallic paint, engine 3.0 L - 190 kW CDI CAT, Garmin MAP Pilot navigation module, wheelbase 3,150 mm, tyre pressure monitoring system, spare wheel in driving specification, reversing camera, low emissions according to Euro 6 standard, heated windscreen washer system, load anchoring rail system, front side airbags (sidebags), front passenger seat height-adjustable/removable, seat upholstery: fabric, heated front seats, sound system, start/stop system, 12V socket, bumpers in vehicle colour, style package, carpet in passenger compartment, exterior door handles chrome, underrun protection (black), navigation system preparation (Garmin MAP Pilot), winter package, heat-insulating glazing, additional heater Interior mirror automatically dimming, rain sensor, heated front seats

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,213 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: gas, mast type: duplex, drive type: Treibgas, LPG forklift Mast type: Duplex Technical condition: good Battery condition: 80 - 100% Sideshift, 3rd valve, 4th valve, heater, full cabin, CE certificate, Hjdpfx Aovgh Hyjbhjp

Condition: used, mileage: 1,99,811 km, power: 120 kW (163.15 HP), first registration: 03/2012, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2026, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 6,200 mm, total width: 2,100 mm, total height: 3,100 mm, loading space length: 3,570 mm, loading space width: 2,032 mm, loading space height: 2,146 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, SPRINTER 318 CDI Box Body with Doors 3.50m ENGINE DAMAGE (Engine turns over but does not start) Special Equipment: Outside temperature display, roof control unit with reading spot lights for driver/co-driver side, 180 A alternator, metallic paint, cabin seating: double passenger seat, cabin seating: comfort suspension seat driver’s side, reinforced rear stabilizer, reinforced front stabilizer, heat-insulating glazing (windscreen with top band filter) Additional Equipment: Adaptive brake light, driver airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated turn signal, 74 Ah battery, brake assist, ABS+ASR braking system, roof lining in driver’s cab, lockable glove compartment, body/build: standard flatbed, fuel tank: main tank 75 L, headlight range adjustment, truck registration, engine 2.1 L – 120 kW CDI CAT, wheelbase 3,665 mm, smoker package, tire repair kit with compressor, emission standard Euro 5, seatbelt system with warning device (driver’s side), seat covers/upholstery: Lima fabric, steel rims 6.5x16, Assyst maintenance interval display, permissible gross weight 3.50 t No liability for printing or typographical errors Sale to commercial customers only Errors and prior sale excepted. Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the legal sense. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * Leasing, financing, and hire-purchase offers available * Warranty insurance possible upon request from the insurer Hedpfx Ajxzl Iajbhep * TÜV / UVV LBW / Tachograph check and installation of OBU device by our local partners * 30-day customs license plates * All export customs documents possible, but must be requested individually * Toll Collect MAUT service can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH ? Andreas Pittas ? Thomas Pittas * Alexander Pittas ? Robin Pittas WHATSAPP numbers* ? ----* Visit us on our website at * Over 200 vehicles always in stock

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 Hjdpfefhbuysx Abhop 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Hedpfx Aow Tfx Dsbhjp Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2023, Special price on request!! Demonstration machine! Machine Concept: The WEIMA high-performance shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieve enormous volume reduction, especially with bulky materials. Operation: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. The hopper can be customized according to individual requirements and ensures continuous and cost-effective material feed without the need for manual assistance. A hydraulically controlled pusher supplies the wood waste to be shredded to the rotor's cutting area, operating automatically and load-dependently. The internal slider guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted with universal joints to prevent lateral forces on the piston seals. The patented, profiled V-rotor made from solid steel has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible cutters / cutting crowns are located in milled knife pockets on special cutter holders. This patented system, by enabling for the first time the reduction of the cutting gap between the counter knife and rotor, ensures high throughput capacity, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one side of the rotor shaft. Technical Specification: Motor power: 18.5 kW Hopper opening: 600 x 800 x 1,050 mm Working width – rotor length: 600 mm Rotor diameter: 256 mm Rotor speed: 60–100 rpm Number of knives: 28 Type and size of knives: concave / 40 x 40 mm cutting crowns Screen hole diameter: 12–15 mm Paint: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Standard equipment: - V-rotor with one knife row 40 x 40 mm - Vibration-damping machine feet - Pressure bar on pusher - Horizontal pusher - Control cabinet with 5 m cable, incl. PLC control and LOGO! text display - Bolted screen Hedpfsvfy Rzox Abhep - WEIMA WAP gearbox - Extraction socket Ø160 mm - Straight feed hopper Additional equipment: - Additional rotor knife row (28 knives) - Self-cleaning hopper (LOGSPACER) - 4-way segmented floor - Fast-reverse hydraulics with shock valve Location:

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used Hodpfxsy A D Ecs Abhjp If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684