Panel van

MERCEDES-BENZ Vito Kasten 109 CDI lang Bj 2006

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Ijdpfx Anexwvqdj Dsia Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: Iodpfjwp Rqfex An Djia • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: not inspected (used), VERINOX JUNIOR universal oven for small and medium productions. The technological excellence of our most sophisticated industrial systems – applied to ovens for small and automatic medium productions – ensures maximum performance and top quality products. Oven with forced draft ventilation for dry cooking, steam cooking, drying and smoking Maximum heat treatment uniformity and efficiency (+/- 1°C) Fast heating up to 180°C Cooking time optimisation Suitable for all types of cooking and for top quality products Simple to use Low energy consumption Recipes and processes programmed from an electronic control panel for automatic oven operation Works 24 hours per day with the utmost reliability The JUNIOR oven is suitable for the following heat treatments: - Dry cooking - Drying - Frying - Smoking - Steaming Iijdpfx Anog H Tldj Doa Preparation uses: cheese, salami, pasta, confection of vegetables and fruits, drying of meat products, smoking of meat products, animal food, fish, etc. Junior universal ovens are thermally insulated with an expanded material that has high insulating properties, coated with sheets of satin-finish and ribbed AISI 304 stainless steel. The excellent speed and uniformity of the heating up to a maximum of 180°C, an important feature of the JUNIOR, is ensured by stainless steel fans and special shielded heating elements. The JUNIOR oven comes with its own steam production system. Integrated control system. The microprocessor-based control panel is an extremely hi-tech, simple and reliable means of control. Its main features are working temperature and time indicators, an indication of the number of stages in progress, airlock position indicator, commands for setting ventilation, commands for setting stage transition, commands for setting pause and delayed start, memorisation of values and functions in progress. Total external dimensions: W 107 cm x H 100 cm x H 215 cm Interior dimensions: W 97 cm x W 75 cm x H 120 cm Interior dimensions of the lower collector drawer: W 73 cm x W 72 cm x H 25 cm Trolley: 90 cm x 72 cm x120 cm The cell has 2 product probes. Power supply: 380 V, 12 kW For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, functionality: fully functional, machine/vehicle number: NEW-10, empty load weight: 535 kg, maximum load weight: 1,465 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 276 150 2000 2 Rear Tipper Trailer NEW VEHICLE Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading platform height: 66cm Gross weight: 2000kg Payload: 1465kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 axles with 1350kg brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tension locks Folding and removable on all sides 15mm thick, slip-resistant and durable phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg vertical load 8 noise-reducing lashing eyes with 800kg tensile strength Reinforced 13" C-rated tires with steel valves M+S tires Net/rope hooks on frame 13-pin connector Front LED position lights Rear lights with reversing light, fog light and triangular reflectors Upper frame with rubber mountings Large tilting angle of 48 degrees to the rear Hand pump with adjustable handle Iodpfxeghpcpo An Deia OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without side walls (discount) - Side wall height extension to 35cm - Black Edition (powder-coated side walls and rims in black) - Loading ramps - Electric tipping control - Charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric operation - Safety support for maintenance when vehicle is tilted - Folding crank rear supports - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Mesh superstructure in various heights, also closed - Additional side walls 30cm with tension lock - Flat cover, with or without support bows - High tarpaulin 160cm or 180cm Further accessories on request! Plus shipping to Gera and registration documents: €200 net Images are for illustration purposes and may show optional accessories at extra charge. Haven’t found the right trailer yet? We have 50-100 vehicles in stock and ready for immediate collection at all times. The workshop is open weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist for axle repairs, including caravan axles. We also offer a wide range of spare parts and accessories for trailers from different manufacturers. Visit us online or stop by in person!

Condition: like new (used), Year of construction: 2022, operating hours: 945 h, functionality: fully functional, total height: 4,100 mm, total length: 12,000 mm, total width: 6,000 mm, power: 50 kW (67.98 HP), input voltage: 400 V, Equipment: documentation/manual, Ecokraft Granulation Line Offered for sale due to increased production requirements, as we have invested in a larger machine. Please be assured that this machine is in excellent condition and ready to meet your production needs. Contact us for pricing. Technical details: 1 High-performance knife mill (45 kW) with soundproof cabin, type SMC 500/700 10 Spare standard rotor knives Iisdpfx Anoygm Erj Dja 1 Dust extractor, type SMU 45 (4500 m³/h) with discharge container (year 2023) 1 Double-screw hopper (6 m³) with 2 extraction belts 1 Dosing system RP 18 DUO (year 2023) 2 Pellet presses RP 18 (18.5 kW), 925 and 942 operating hours 1 Pneumatic lubrication system for 18 kg bucket 2 Central lubrication systems 2 Digital water dosing pumps (803/54 litres) 2 FT screeners and extraction belts 2 Big bag stands for fine product collection 2 Big bag stands for cooling 1 Electric control cabinet

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Isdpfjupxfhjx An Deia Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: excellent (used), HA 4 surface planer planing width 450 mm total table length 2500 mm Iiedpfxjinkfns An Dja Feed table 1500 mm Machine height 820 mm Max. Chip thickness 15 mm Cutter shaft revolutions 4800 rpm Motor power 4 HP Weight 660 kg 3-piece cutterhead

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Stainless Steel. Used! Good condition! Inlet: 6" - Outlet: 6" Isdpfx Anjhck S Es Deia

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: Bay Kessel - BBS Germany Type: HDK 7000 Capacity approx.: 7,000 kg/h Operating overpressure: 10.0 bar Increased test pressure: 18.5 bar Max. steam temperature: 184.6 °C Water content full approx.: 17,500 l Year of manufacture: 2017 CE marking: CE 0036 Iiodox A Dpljpfx An Dea Equipped with Weishaupt gas/oil burner WM-GL50/1-A, version ZM-R-NR, gas control line, separate control cabinet, feed water pump, Eco, and existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2002, There are zwei identical vertical bag filling machines available, weight: 1.1t. Iodpjnfvxzefx An Doia