3-axis vertical machining center

Mikron UM 600

Condition: used, Year of construction: 1998, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 94.98.030, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 100 rpm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,800 mm, table width: 520 mm, table length: 900 mm, position of the milling head: mittig, type of input current: three-phase, rotational speed (max.): 6,000 rpm, rotational speed (min.): 100 rpm, table load: 400 kg, overall weight: 3,500 kg, input voltage: 400 V, workpiece weight (max.): 100 kg, input current: 40 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Good used CNC milling machine with low hours. Used exclusively for repairs and very small production runs. Extensive assortment of tool holders as shown in the photos, including vise, chucks, cutters, plates, and tap holders. Also equipped with a Benz high-speed spindle for wet operation up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gearbox stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Toolholder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Automatic travel distances Spindle longitudinal feed (X-axis): 600 mm Spindle transverse feed (Y-axis): 500 mm Spindle vertical feed (Z-axis): 450 mm Feed drives (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse rate X / Y-axis: 15,000 mm/min Rapid traverse rate Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Psdpfeywn Sisx Alhegn Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Electrical connection data Total installed nominal power: 15.8 kW Usable and connected load: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. Psdpfx Aljxtxk Sjhsgn You can find further milling machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 11,320 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle motor power: 15,000 W, tool weight: 13,000 g, number of axes: 3, This 3-axis MIKRON UM600 TNC 410/426 was manufactured in 1998. It features a maximum longitudinal movement of 600 mm, transverse movement of 500 mm, and vertical movement of 450 mm. The machine is equipped with a robust table size of 520 x 900 mm and a maximum table load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON UM600 TNC 410/426 vertical machining centre we have for sale. Contact us for further details. • Machining spindles (vertical and horizontal) • Drive power (44% duty cycle): 15 kW • Drive power (100% duty cycle): 6 kW • Motor torque: 50 Nm • Max. torque at spindle (44% duty cycle): 800 Nm • Number of gear stages: 4 • Max. tool diameter: 130 mm • Included options: in-machine measurement and fast spindle Psdpfsy D Thvjx Alhjgn • Feed drives (AC) • Programmable feed rate X/Y: 0 – 15,000 mm/min • Programmable feed rate Z: 0 – 12,000 mm/min • Rapid traverse X/Y: 15,000 mm/min • Rapid traverse Z: 12,000 mm/min • Coolant system • Reservoir capacity: 150 l • Flow rate: approx. 20 l/min • Clamping table • Table size: 520 × 900 mm • Number of T-slots: 4 • T-slot width: 14 H7 • Tool changer TCD 44 • Tool positions: 22 • Tool diameter: 80 / 130 mm • Max. tool length: 350 mm • Max. tool weight of Tool changer TCD 44: 6 kg • Max. workpiece weight in drum magazine: 200 kg • Chip-to-chip time: 20–25 s • Tool change time: 12–16 s • Electrical connection • Total installed rated power: 15.8 kW • Useful/connected power: 12.3 kW • Operating voltage/frequency: 3 × 400 V / 50 Hz Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 turning speeds 5-6.300 U/min table-size 900 x 530 mm table load 400 kg total power requirement 9 kW weight of the machine ca. 3550 kg dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Pgedsykb Hlspfx Alhsn Accessories: Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg Pgodpfx Aljyh Ndwohen including 3 jaw chuck and tool holder

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Pedpoqagugsfx Alhegn

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Pgedpfsx Ahx Dsx Alhsn Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, For sale: Hauser coordinate grinding machine, model S35-400 The machine is in excellent condition and underwent a partial overhaul in 2024 for €15,000. The machine is equipped with 6 high-quality grinding motors, a face motor, and turbines. TECHNICAL DATA Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Pgjdpfx Alowtqthehjn Maximum taper grinding: 16° Table size: 600 x 380 mm T-slots: 6 units, 10 mm width, 50 mm spacing Table load capacity: 300 kg Speeds and Tool Holders Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measuring accuracy: 0.001 mm Base deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ System pressure: 5 bar Footprint: 3.5 x 4.4 m Machine height: 3.5 m Connection value: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction unit - Very high-quality accessories included Transportation and loading can be arranged across Europe at extra cost upon request. Prices plus VAT. Viewing by appointment is possible. Contact us—our team is happy to assist you. Trade-in or exchange possible! MACHINE PROCUREMENT / SALES PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 2009, Machine will come with robot . Pgedpfexfu S Nsx Alhsn 42.000 rpm

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Pedpfx Aleviq U Eshjgn Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions