MIKRON UM600 TNC 410/426
MIKRON UM600 TNC 410/426

Name: MIKRON UM600 TNC 410/426
Brand: MIKRON
Availability: InStock

Year of construction

1998

Condition

Used

Location

Austria

MIKRON UM600 TNC 410/426 MIKRON UM600 TNC 410/426

Machine data

Machine type:: MIKRON UM600 TNC 410/426

Manufacturer:: MIKRON

Model:: UM600 TNC 410/426

Year of construction:: 1998

Condition:: ready for operation (used)

Operating hours:: 11,320 h

Price & Location

Location:: , Austria

Call

Technical details

Spindle speed (max.):: 6,000 rpm

Travel distance X-axis:: 600 mm

Travel distance Y-axis:: 500 mm

Travel distance Z-axis:: 450 mm

Spindle motor power:: 15,000 W

Tool weight:: 13,000 g

Number of axes:: 3

Details about the offer

Listing ID:: A21756113

Reference number:: AT-MIL-MIK-1998-00001

Update:: 24.04.2026

Description

This 3-axis MIKRON UM600 TNC 410/426 was manufactured in 1998. It features a maximum longitudinal movement of 600 mm, transverse movement of 500 mm, and vertical movement of 450 mm. The machine is equipped with a robust table size of 520 x 900 mm and a maximum table load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON UM600 TNC 410/426 vertical machining centre we have for sale. Contact us for further details.
Bwedpfx Asy D Thvjigsr

• Machining spindles (vertical and horizontal)
• Drive power (44% duty cycle): 15 kW
• Drive power (100% duty cycle): 6 kW
• Motor torque: 50 Nm
• Max. torque at spindle (44% duty cycle): 800 Nm
• Number of gear stages: 4
• Max. tool diameter: 130 mm
• Included options: in-machine measurement and fast spindle
• Feed drives (AC)
• Programmable feed rate X/Y: 0 – 15,000 mm/min
• Programmable feed rate Z: 0 – 12,000 mm/min
• Rapid traverse X/Y: 15,000 mm/min
• Rapid traverse Z: 12,000 mm/min
• Coolant system
• Reservoir capacity: 150 l
• Flow rate: approx. 20 l/min
• Clamping table
• Table size: 520 × 900 mm
• Number of T-slots: 4
• T-slot width: 14 H7
• Tool changer TCD 44
• Tool positions: 22
• Tool diameter: 80 / 130 mm
• Max. tool length: 350 mm
• Max. tool weight of Tool changer TCD 44: 6 kg
• Max. workpiece weight in drum magazine: 200 kg
• Chip-to-chip time: 20–25 s
• Tool change time: 12–16 s
• Electrical connection
• Total installed rated power: 15.8 kW
• Useful/connected power: 12.3 kW
• Operating voltage/frequency: 3 × 400 V / 50 Hz

Technical Specification
Taper Size SK 40

Seller

Registered since: 2017

1,370 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

Wurmlingen

6,871 km

Vertical machining center
YCMNMV106A

€39,500

ONO plus VAT

Call

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways Bwodpfoyh Ri Isx Aigsr - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

See details

Listing

Germany

6,946 km

MIKRON VCP 600
MIKRONVCP 600

Call

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,743 h, controller manufacturer: HEIDENHAIN, controller model: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-slot tool changer. The working range is 600 x 450 x 450 mm, supporting a maximum workpiece weight of 500 kg. Ideal for precise machining of metals and alloys, it offers stable construction and efficient cooling. Consider the opportunity to buy this MIKRON VCP 600 vertical machining centre. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle operating time: 5.743 hours • Tool changer: 30 tools • Positioning accuracy: ±3 µm • tool clamping system HSK 63 • Key features: • Versatile applications: precise machining of a wide range of materials • High-performance spindle for fast, precise machining • Stable, robust construction for high accuracy with heavy workpieces • Automation-ready: integrated features for automated tool and workpiece changes • Efficient cooling system for optimized performance and tool life • Application: Ideal for tool and mold making and the production of high-precision components across various industries Additional equipment • m&h 3D probe • Vise: not included Bodpfsx Imtyex Aigswr

See details

Listing

Austria

6,946 km

Hurco VM1
HurcoVM1

Call

Condition: ready for operation (used), Year of construction: 2004, operating hours: 30,826 h, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, controller manufacturer: HURCO, controller model: Ultimax, overall weight: 3,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Hurco VM1 was manufactured in 2004. It features a maximum spindle speed of 10,000 rpm and a cutting feed rate of up to 11,400 mm/min. The machine has a table size of approximately 760 × 355 mm and offers a tool changer with 16 stations. If you are looking to get high-quality milling capabilities, consider the Hurco VM1 vertical machining centre we have for sale. Contact us for further details. • Cutting feed rate: max. 11,400 mm/min • Table size: approx. 760 × 355 mm Bodpfxoylnbfe Aigjwr • Tool changer: 16 stations • Machine hours: 30.826 • Condition: Used, good overall condition; fully functional and ready for operation Additional equipment • Coolant pump • Chip conveyor • Machine vise • 3D touch probe • Various collet sets / SK 40 tool holders • Tool cabinet with worktop and bench vise • Additional accessories by arrangement Technical Specification Taper Size SK 40

See details

Listing

Schwäbisch Gmünd

6,799 km

Milling machine
QuaserMV 184

Call

Listing

Weiterstadt

6,885 km

Machining center
HurcoVMX 50

Call

Listing

3-axis vertical machining center Mikron UM 600

Burgoberbach

6,740 km

3-axis vertical machining center
MikronUM 600

Call

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Bsdpfjwx Naqsx Aigjwr Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

See details

Listing

Vertical machining center Mikron VCP 600

Reiden

6,932 km

Vertical machining center
MikronVCP 600

Call

Listing

CNC machining center Deckel Maho DMC 635V

Ebenweiler

6,815 km

CNC machining center
Deckel MahoDMC 635V

Call

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Bwodoylmdfepfx Aiger Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

See details

Listing

Universal milling machine HERMLE U 630 S

Waiblingen

6,830 km

Universal milling machine
HERMLEU 630 S

Call

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Bedpfsygwz Rjx Aigewr Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.

See details

Listing

Germany

6,760 km

CNC Machining Center
HurcoVMX 50

Call

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible. Bwjdpfeuzyafsx Aiger

See details

Advertise here