Stamping press with decoiling line

Moll EP 0

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever Lredpfx Afjxg Rvaszsw • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! Ledpfofz U Hvex Afzerw When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 1969, condition: used, Swivel bending machine Albert steel TYpABK 400 /5 useful length 2530 mm Lredpfxoh Rkh Do Afzjw Sheet thickness 5 mm

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney Lredofzb Nispfx Afzow The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters. Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process. Series SL Lsdpfxefy T H Ie Afzjrw Power Electricity Forced air circulation Two-channel USB temperature recorder Number of temperature sensors MTS 2+ Wall insulation thickness (mm) 240 Ceiling insulation thickness (mm) 300 Number of programs 20 Max. Number of steps in the program 10 Average heating time up to 180 ° C 40min 35min 25min 25min 20min Number of door leaves 2 Diagnostics / update via the internet Media consumption meter Stainless steel ceiling elements Direct heating Explosionproof closures Silicone door seal Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff. ThPID was created to offset the effect of inertia called hysteresis. The standard solution is based on a circuit that on / off heats with constant power. ThPID is a system in which, by adjusting the voltage at the setpoint temperature, the heating power that is currently needed is selected - minimizing the effect of temperature fluctuations. The ThPID system further allows the heating power of the furnace to be cut to a specified percentage, for example in the absence of power at the moment.The MTS is designed to provide realistic reading of the temperature of the oven. The standard measurement is based on a temperature measurement which is often wrong. MTS is a system of multiple sensors localized in the extreme places of the chamber.

Year of construction: 1990, condition: good (used), Sideloader used Kalmar, Lsdpoh Et E Njfx Afzorw unit was well maintained Rest see pictures

Condition: new, functionality: fully functional, Year of construction: 2025, Box Type Electrostatic Powder Coating Oven: Length: 500cm, Width: 250cm, Height: 300cm Lrodev Nvndjpfx Afzew - Powder Coating Booth with Filter: Length:300cm, Width:220cm, Height:270cm - Electrostatic Powder Coating Equipment: Model: HMK MULTICOLOR, Type of Use: Manual

Condition: good (used), functionality: fully functional, working width: 1,250 mm, stroke length: 105 mm, distance between stands: 1,000 mm, overall weight: 1,500 kg, total width: 1,250 mm, pressing force: 25 t, Promecam RG25-12 Bending length 1250 mm stand passage 1000 mm bending pressure 25T motorized backgauge connected load 4kW Lrsdpfx Afou Dm Rvszew stroke 105mm Intermediate pieces Int100 front support tables Very well maintained machine Amada tool system incl. many tools

Condition: new, WMD25LV - 230V / 1F Drilling capacity steel ----- 25 mm Milling capacity steel ----- 20 mm Ledpfx Afjga T Eiozsrw Flute cutters ----- 63 mm Motor ----- Brushless 750W Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle mounting ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal displacement ----- 490 mm T-slots ----- 3x12 mm Unloading ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Box with various tools OPTION * Support box € 249,00 ex vat

Condition: ready for operation (used), De uitrusting bestaat uit: - 3 afwikkelaars Elba 5 ton capaciteit - 1500 mm - Richtunit RAS 26.45 - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen RAS 82.16 - Ras vouwmachine snelheid: 15 m/min Vermogen: 16 kW Lrjdpfx Aswwbf Njfzjw