Cycle-controlled lathe

MONFORTS RNC500 AC 1500 x 300 mm

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories Fedsy S T T Uopfx Aa Eopp 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: good (used), Year of construction: 2001, functionality: fully functional, Horizontal Boring Mill UNION T110 Year of manufacture: 2001 Travel axes: X: 1500 mm Y: 1250 mm (total vertical adjustment) 0 mm - lowest position of the spindle center to the table surface Z: 1000 mm W: 550 mm (quill movement) B: 360° infinitely variable Spindle diameter: 110 mm Transmission steps: 2 Fpodpfxey Rpm Uo Aa Ejp Max. spindle speed: 4000 rpm Rapid traverse: 15 m/min Spindle taper: SK 50 Clamping table surface: 1000 x 1250 mm T-slot width: 22 mm Height of clamping surface above floor: 1050 mm Max. table load: 6 t Total weight (complete): approx. 13.5 t Control system: Heidenhain TNC 426 Electronic handwheel Various tool holders can be purchased additionally.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Fpjdev Epzvspfx Aa Esp Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 68910, workpiece weight (max.): 5,100 kg, wheel width: 180 mm, grinding wheel diameter: 330 mm, helix angle: 45 °, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, type of input current: AC, wheel diameter: 10 mm, gear diameter: 330 mm, overall weight: 5,100 kg, total height: 2,300 mm, total length: 6,000 mm, total width: 4,500 mm, Wheel diameter - max. 10 - 330 mm Wheel width 180 mm Module - max. 7 Fsdpfx Aajykrmcj Ejpp Module - min. 0.5 Clamping length 420 mm Number of teeth 10 - 600 Helix angle - max. +/- 45° Speed 1100 - 1900 rpm Grinding wheel diameter 280 - 350 mm Grinding wheel width 84 - 104 mm Machine weight approx. 5.1 t Required space approx. 4.5 x 6.0 x 2.3 m Grinding oil filtration unit Reishauer AF

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Fedpfx Aoyvtugsa Espp

Condition: excellent (used), Year of construction: 2015, grinding length 500 mm grinding width 250 mm Fpedpfoxy S Dxsx Aa Eep

Condition: good (used), Year of construction: 2004, HSK 63 18.000 rpm Fjdoznmifopfx Aa Eepp Parts shown by hand not come.

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling machine Condition: Used Fpjdpfxozhlq Io Aa Ejp Year of manufacture: 2002 Operating hours: 34,739 hours Program running time: 6,435 hours Technical data Tool holder: SK 40 Number of tool positions: 16 Travel ranges X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm, rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: total 17 kVA Weight: approx. 3,000 kg Dimensions L x W x H: approx. 2100 m x 1520 (without peripherals) approx. 2140 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 Fedpoxcwdvsfx Aa Espp The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. All tools and accessories are included. Inspection possible by appointment.

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Fjdpszg Iqnofx Aa Espp