Vertical machining center

Mori Seiki VS 10000

Condition: used, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,900 mm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! Year of manufacture of the machine: 2023 Capacities / Travel distances: Longitudinal (X): 14,000 mm Ncjdpfx Aeyu Sznjqvjt Vertical (Y): 4,500 mm (*5,076.5) Cross (Z): 1,900 mm * Due to the two horizontal positions of the automatically indexing milling head, the vertical machining area can be extended by 576.5 mm. Table area (2 units): Length: 6,000 mm Width: 3,000 mm Number of T-slots on the table surface: 12 Width of T-slots: 22 mm Distance between slots: 250 mm FIBRO Rotary & Sliding Table: Dimensions: 3,000 x 3,000 mm Sliding axis: 1,500 mm Max. table load: 40 t Year of manufacture: 2002 Paint finish: RAL 7021 (black-grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Big Plus Pull stud: DIN 69872 Form A Main drive: Drive type: SIEMENS main spindle motor with a 2-stage oil-cooled ZF gearbox Drive power: 100% duty cycle 53 kW (S1) Spindle speed range: Spindle speed: 20–4,000 min-1 Max. torque: at S1 – 100% duty cycle 1,531 Nm Max. feed force: X, Y, Z axis: 31,000 N Max. rapid traverse speed: X, Y, Z axis: 25,000 mm/min BASIC EQUIPMENT OF THE MACHINE: Heidenhain CNC control TNC640 High-performance orthogonal milling head Automatic tool changer (80 positions) Chip conveyor with floor discharge Coolant system with 20 bar & (IKZ) DYNAMICS ACTIVE STABILIZER+ "DAS+ SYSTEM" Cross-axis compensation Automatic milling head change system Operator platform Camera for workspace monitoring Pendulum machining package ACCURA HEADS Optimized Contour Milling (OCM) RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line are sourced through a rigorous selection process and undergo a comprehensive inspection (deep-dive check). After thorough cleaning, any obvious defects or faults found are professionally repaired by our expert service team.

Condition: good (used), Year of construction: 2007, table length: 800 mm, table width: 800 mm, Equipment: CE marking, documentation/manual, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control system: Fanuc 18 imb + Mapps 2 Year of manufacture: 2007 TECHNICAL DATA: Travel ranges: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse rate (X/Y/Z): 50 m/min. Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Ncodpfxov Nhyls Aqvjt Tool holder: BT 50 Tool changer Number of tool positions: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (L x W x H): 9,200 x 4,900 x 3,920 m Equipment features: Internal coolant system (ICS): bar Chip conveyor High-pressure pumps

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Ncsdpsrpn Dvofx Aqvjt Technical details shown on picture.

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Ncsdsx Hp Ikjpfx Aqvst Equipment & Features Hydraulic Tailstock Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, rotational speed infinitely variable, DMG-MORI DMU 60 EVO linear Year 2014 Travel X/Y/Z: 600 mm x 500 mm x 500 mm Motor spindle SK40 with 18,000 rpm NC tilting rotary table, B and C axes Tool magazine with 60 stations Heat exchanger for spindle and table Dynamic package Control: Siemens 840 D SL with Shop-Mill Njdpfx Aqexvhrwsvect Infrared probe Heidenhain TS 649 Blum laser tool measurement Scraper belt conveyor, HPC with paper band filter and 80 bar Oil mist emulsion separator Programmable coolant nozzles Electronic handwheel, mode 4 Turning and milling cycle

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system. Ncodjtv H Ucopfx Aqvjt

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, Nsdpopumdcofx Aqvsct airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm Nodeynmpyepfx Aqvect grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Nsdpfx Asym Nfzoqvoct Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 2000 x 2000 mm TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm MAX ADMITTED LOAD: 15000 Kg HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm TOOL MAGAZINE: CHAIN-TYPE ; 80 POS Nodpfowl R Agox Aqvjct CONTROL UNIT: HEIDENHAIN iTNC 530 ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER NOTE: WITH ROTARY TABLE 1500X1500 mm; MAX ADMITTED LOAD 15000 Kg