Universal machining center

DMG MORI DMU 60evo

Condition: excellent (used), Year of construction: 2022, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, Nodow Nq E Uopfx Aanodf C axis 0.001 degrees Rapid feedrates 80m/min, 60 station toolchanger, spindle taper HSK 63, spindle speed 20,000rpm, Siemens 840D Ergoline control, swarf conveyor, Through Spindle Coolant,

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Nodpfev N Hc Sox Aansdf

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, DMG-Mori DMU 60 Evo Linear Control: Heidenhain ITNC 530 HSCI NC swivel rotary table 600 mm x 500 mm B-axis swivel range: -5° to +110° C-axis 360°, including table cooling Spindle speed: 20 - 24,000 rpm, HSK 63 A Tool magazine with 120 positions Ndodpoxvhtnofx Aanef Infrared measuring probe Renishaw OMP 60 Dynamic package, Laser tool measurement ICS with 40/80 bar, with paper band filter 980 l, chip conveyor Electronic handwheel, 3D Quickset ATC, programmable coolant nozzles via M-function Operating mode 4 Tropic package

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot Ndodpfxjxgnz Te Aanef - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss CNC coordinate measuring machine Prismo VAST GOLD with rotary table Year of manufacture: 1999 Retrofit 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Features and equipment: C98 control system with BP26_SE control panel VAST GOLD sensor system 13-position stylus change magazine Stylus change plate Stylus accessories Ndodsvdtzdspfx Aanef Calibration sphere Reference probe Workstation with monitor Calypso Basic 5.2 software Upgrade to the current Calypso version and additional options possible Complete retrofit with C99 and the current Calypso version possible Available at short notice

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Ndedpowp Ic Ejfx Aansf Condition: used, ready for operation Travel x/y/z 600/500/500 mm Rapid traverse 80m/min Speed 20-14,000 rpm Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Documentation

Condition: excellent (used), Year of construction: 2018, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, C axis 0.001 degrees Rapid feedrates 80m/min, 120 station toolchanger, spindle taper HSK 63 spindle speed 20,000rpm, Nsdpfx Ajwnpzaeansdf Siemens 840D eRGOline control Swarf conveyor. Through Spindle Coolant

Condition: good (used), Year of construction: 2006, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table width: 1,000 mm, table length: 600 mm, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Operating hours: 32,379 h (as of July 9, 2024) Nsdpfxsxcpkzj Aanedf Spindle running time: 15,674 h (as of July 9, 2024) Clamps on table are not included! Machine available from: Imediately

Condition: ready for operation (used), Year of construction: 2005, operating hours: 9,400 h, functionality: fully functional, machine/vehicle number: 8662, turning length: 380 mm, turning diameter: 400 mm, spindle bore: 55 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 100 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 380 mm, spindle motor power: 11 W, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 3,500 mm, total width: 1,650 mm, type of input current: three-phase, overall weight: 3,300 kg, bar passage: 45 mm, spindle nose: ASA 5", coolant pump power: 75 W, tailstock quill diameter: 85 mm, number of tool stations in tool turret 1: 12, Equipment: documentation/manual, Biglia B301 CNC Lathe – Used & Refurbished in Excellent Condition Year 2005, used and refurbished, ideal for precision machining of small to medium-sized components. This machine is robust, reliable, and compact, equipped with a bi-directional 12-position turret, automatic tailstock, and hinged belt-type chip conveyor. Perfect for machine shops and companies seeking a high-quality, ready-to-use CNC lathe. Main technical specifications: - Model: Biglia B301 - Year: 2005 Capacity: - Max swing diameter: 400 mm - Max bar working diameter: 45 mm - Max secondary operation diameter: 220 mm - Max machining length: 380 mm Spindle: - Spindle nose: ASA 5” - Spindle bore: 55 mm - Chuck: 3-jaw Autoblok 210 BH - Spindle speed: 100 – 5000 rpm - Spindle motor power: 11 – 15 kW Travel: - X axis travel: 160 mm - Z axis travel: 380 mm - B axis travel: 440 mm Feed rates: - X/Z axis rapid traverse: 20 m/min - B axis rapid traverse: 12 m/min Turret and tailstock: Ndedpsvw Agvsfx Aanof - Turret: bi-directional, 12 stations - Automatic tailstock: yes - Quill diameter: 85 mm - Taper: MT4 Weight and dimensions: - Machine weight: 3,300 kg - Dimensions: 3,500 × 1,650 × 1,900 mm (h) Included accessories: - Hinged belt-type chip conveyor - 12 static tool holders - Parts catcher (pick-off arm) Condition and availability: - Used machine, tested and in perfect operating condition - Ready for delivery - Machine can be inspected by appointment at our facility - Available for movement testing by appointment at our site Ideal for: precision machining, batch production, and applications on steel, aluminum, brass, and technical materials.

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Vertical measuring range Z = 50mm Column travel range Z2 = 350mm Inclination +/- 45° Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003 Nedpfxsvun Tpj Aanjdf