Used 2 Color Offset Printing Machine for sale (1,02,049)

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm Ffodpfxswt T Uhj Ag Rst threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz Ffsdpfxsv N N Scs Ag Rst main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition.

Condition: ready for operation (used), functionality: fully functional, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Submitting a bid obligates the buyer to collect the item by the deadline of 28/01/2026! A prompt appointment for collection must be arranged after the end of the auction, as the machine has not yet been dismantled. TECHNICAL DETAILS Fsdox Hfugjpfx Ag Roft Spindle diameter: 100 mm Spindle taper: ISA steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center height above table: 0 mm Highest spindle center height above table: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal movement of tailstock: 1,300 mm Spindle speed range: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Transverse travel of the table: 1,200 mm 34 feed rates for spindle, headstock, and table: 0.017 - mm/rev Infinitely variable feed for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Current type: Three-phase Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation including wiring diagram Electrical schematics Operating manuals

Condition: excellent (used), FDI manual punch press, Fredrich GmbH . Very good condition. Ffsdoum H Edjpfx Ag Rjt

Condition: used, Year of construction: 1995, functionality: fully functional, Materials: papers, metallized BOPP, BOPP, PET, LDPE, aluminum Materials: papers 20–120 g/m2 Unwinder: 100 cm Rewinder: 100 cm Solventless laminating machine Production speed: 300 m/min Maximum material width: 850 mm Maximum lamination width: 835 mm 1 hot melt adhesive heating tank Min. lamination width: 317 mm Max. lamination width: 835 mm 1 hot melt adhesive heating tank 2 unwinding units 1 rewinding unit 1 corona unit 2 shafts at 760 mm Ffjdpfox Sdb Nsx Ag Rjt 3 shafts at 1500 mm 45 sleeves in various sizes

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: UZ0611, working width: 1,320 mm, type of input current: three-phase, overall weight: 40,000 kg, total height: 5,300 mm, total length: 12,800 mm, total width: 6,200 mm, compressed air connection: 6 bar, Fully operational 8-color printing machine. Equipped with BST Eltromat visual inspection system, Bosch Rexroth drive system, and Tresu ink pumping system. The machine comes with an up-to-date record of preventive and corrective maintenance, numerous software updates, and traceability for replaced components. The equipment is sold together with an industrial water chiller and includes the following auxiliaries: Anilox rollers: 100 - 4 pcs, 120 - 3 pcs, 180 - 1 pcs, 220 - 1 pcs, 260 - 1 pcs, 301 - 1 pcs, 340 - 5 pcs Printing sleeves (print repeat): 350 - 8 pcs, 370 - 8 pcs, 390 - 8 pcs, 400 - 8 pcs, 430 - 8 pcs, 450 - 8 pcs, 475 - 8 pcs, 500 - 16 pcs, 525 - 8 pcs, 550 - 8 pcs, 570 - 8 pcs, 600 - 8 pcs, 640 - 8 pcs, 740 - 8 pcs, 860 - 8 pcs Ffedpfxsxwm Hio Ag Rst

Condition: ready for operation (used), Year of construction: 1981, Water dampening Ffjdpfx Aox Srcbsg Rot good condition no damages on cylinders and gears

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 HZ Sn 50% ED: 100kVA Ffsdpfx Agevbgxqj Ret S max: 318 kVA I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, Original purchase price of the printer was €486,000 EUR net! TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly print capacity: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 gsm to 350 gsm Paper weight range (when validated): up to 400 gsm Duplex printing media weight: 350 gsm MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Dimensions main unit C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like print quality Fodpfx Aex Ezgpjg Rsft Suitable for specialty and textured media In-line color management sensors Automatic calibration

Condition: good (used), Year of construction: 1994, I will sell a Tampoflex Jumbo 150-400 pad printing machine, manufactured in 1994. Functional and in good condition. Fedpfx Agjv Eqatj Roft

Condition: new, Year of construction: 2025, Features and applications Ffedpfjvxgp Dsx Ag Rot Base and movable jaw made of high-quality cast iron Replaceable, grooved jaw inserts, inductively hardened and ground Thrust bearing increases the efficiency of the clamping mechanism Intended for mounting long items that take advantage of the whole length of the table Equipment: crank, fixing grooves

Condition: excellent (used), CATALOG NUMBER 6051 TECHNICAL DATA - Pull belt width: 1300 mm - Max workpiece width: 1250 mm - Max workpiece height: 60 mm Brush units: - 2 brush rollers: 1 for distressing (structuring), 1 for polishing Fodpfx Aex Rc Ufjg Rjft - Brush diameter: 260 / 300 mm - Brush length: 1250 mm - Brush spindle diameter: 32 mm - Brush motors: 2 × 2.6 kW - Reducer motors (servomotors): 2 × 0.55 kW - Brush roller speed: 300–1000 rpm - Brush cleaning air blow-off - Electric height adjustment for sanding Brush oscillation: - Brush oscillation/stroke - Range: 45 mm - Feed rate of pull belt: 1.5–7.5 m/min - Pull belt motor: 0.75 kW - Belt cleaning air blow-off: 0.75 kW - Vacuum pump: 7.5 kW - Compressed air: 6 bar - Extraction connection diameter: 120, 160, 220, 310 mm - Dimensions (L/W/H): 2060 × 2000 × 2050 mm - Weight approx. 2000 kg ADVANTAGES – French manufacture – Never repainted – Equipped with nylon brush for wood structuring (distressing) and 1 sanding/polishing wheel for wood – Vacuum pump – Servo motors – individual speed adjustment for each brush – Used sander, in very good condition Net price: PLN 29,900 Net price: EUR 7,120 depending on exchange rate (4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: good (used), Offer consisting of: SM52-2, year of manufacture 2000, immediately available, impression count 92 million. Fodpfx Asx Ryl Ujg Roft

Condition: good (used), Year of construction: 1981, wire diameter range: 1,0 - 5,0 mm ring diameter range: 100 - 600 mm Fsdpfx Agsb Hqz Us Rjft wire feeding length: max. 2.000 mm output: 10 - 120 pcs./min.

Condition: excellent (used), Year of construction: 2010, operating hours: 6,191 h, functionality: fully functional, We offer for sale an SPS Stop Cylinder B1 machine, year of manufacture 2010, commissioned for production in 2018. Between 2010 and 2018, the machine served as a showroom demonstration unit, operating only with blank runs and no printing, resulting in a higher number of blank cycles – 3,366,000 – and 1,818,912 printed impressions. The machine consists of a stop cylinder, UV tunnel, and stacker. During last year's service inspection, an SPS technician assessed the machine's condition as the best he has ever seen in his career servicing used machines. The machine will be available in January 2026. Fedpfxoxmuu He Ag Rjft The current price is valid until the end of January 2026.

Condition: good (used), I am selling a Teca-Print TPX 350 pad printing machine. Functional and in good condition. Ffsdpsv H Sgwjfx Ag Ret

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics Fedsudi Uzspfx Ag Rjft A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Year of construction: 1973, Technical details: grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm dimensions of grinding wheel: 275 - 315 mm magnetic plate size: 400 x 200 mm max. table load: 200 kg weight of the machine ca.: 1,6 t Fsdexu Dv Aepfx Ag Reft dimension machine xH: 1,55 x 1,45 x 2,20 m

Condition: used, • Good condition Ffodpfx Agsv Sar Ej Rst • Print area approx. 3000 x 1800 x 1100 mm

Condition: new, The RA 2 Tube End Finishing Machine is an essential tool for every workshop, designed to simplify the assembly and welding of tubes at a precise 90° angle. This robust device caters to various tube diameters while allowing for horizontal and vertical operation, making it versatile for both dual and corner unions. With its capability to handle tubes with wall thicknesses of up to 5 mm, from steel to non-ferrous metals, the RA 2 ensures quick and efficient machining. An eccentric shaft guarantees minimal effort during operation, enhancing productivity. The machine comes standard with an operator manual to facilitate setup and use. For your tube end finishing needs and additional inquiries, you can request a quote today and elevate your performance with KNUTH equipment. Ffodpfxewhkf Ho Ag Rot

Condition: good (used), Mirus Anleger printing machine, in working order. Fjdpfxjud Awvs Ag Rsft

Condition: new, Year of construction: 2025, Features and applications Base and movable jaw made of high-quality cast iron Fodsvxgq Ujpfx Ag Rsft Replaceable, grooved jaw inserts, inductively hardened and ground Thrust bearing increases the efficiency of the clamping mechanism Intended for mounting long items that take advantage of the whole length of the table Equipment: crank, fixing grooves

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) Ffodpfx Aeu Nv Eaeg Rot external Rittal water recooling unit SK3320.609 *

Condition: good (used), - Year of manufacture 12/77 - Serial number: 3241 - Belt size 100 x 1830 mm - Dimensions 1650 x 1200 x 100 mm (HxWxD) Price on request Fedpfx Asr Nvgnjg Reft

Condition: used, Technical details: grinding length: 630 mm Fedsu Ngkmjpfx Ag Roft grinding width: 250 mm workpiece height: 300 mm Table dimensions: 2050 x 340 mm magnetic plate size: 600 x 250 (110V) mm feed range: Tisch: 0,005 - 0,045 mm/Hub feed of spindle: 0,001 - 0,045 mm/Hub dimensions of grinding wheel: Ø 220 x 46 mm total power requirement: 8,5 kW dimension machine xH: 2,1 x 1,8 x 1,9 m dimension coolant device LxWxH: 0,8 x 0,31 x 0,5 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump *