Used 2 Axis Cnc Lathe for sale (55,923)

Condition: reconditioned (used), Year of construction: 2006, Operating hours: 13,584 h, Turning diameter over cross slide: 770 mm, Turning length: 1,043 mm, Turning diameter: 550 mm, Spindle bore: 116 mm, Spindle speed (max.): 2,000 rpm, Spindle speed (min.): 20 rpm, Travel distance X-axis: 362 mm, Travel distance Z-axis: 1,105 mm, Spindle motor power: 37 W, Rapid traverse X-axis: 16,000 mm/min, Rapid traverse Z-axis: 20,000 mm/min, Total height: 23,050 mm, Total length: 42,640 mm, Total width: 22,000 mm, Spindle nose: ASA 11, Equipment: Documentation/Manual, Rotational Speed Infinitely Variable, 2-axis CNC lathe “DOOSAN mod. PUMA 400B” with Fanuc 21i-TB CNC Yrpyoy8C

Year of construction: 2014, Condition: good (used), Baujahr 2014 Spindelstunden 41’617h Stangendurchlass 36mm Mitsubishi M700 Späneförderer LNS Toolsetter 2x12Stationen Bod08R3Aths 2 Spindel, 2X, 2Y und 2Z-Achse Diverse angetriebene Werkzeughalter (Axial,Radial) Spannzangenfutter F48 Kühlmittelpumpe 8bar

Condition: good (used), Year of construction: 2002, Turning length: 500 mm, Turning diameter: 550 mm, Spindle bore: 330 mm, PUMA 2000Y 8 Inches Lathe with C and Y axis 550mm 330mm 500mm Dppauz Fanuc control Spindel Power 5000rpm Main Spindle Motor 15000rpm 2x Units are availible in stock

Year of construction: 2024, Condition: new, 2-axis CNC rotary table. Oscillating circle 700 mm, face plate 320 mm. High quality duplex gearing. Also available as direct drive. See picture 2. Technical data URH 320 i DT Faceplate diameter (mm) 320 Load capacity (kg) Horizontal 110 Vertical 70 Accuracy swivel axis ±30" Accuracy rotary axis ±15" Repeatability 4" Cdgcyyh8 2 years warranty.

Condition: used, Year of construction: 1988, Machine/vehicle number: 08525201, For sale is a used VOEST-ALPINE WNC 500S/2. The machine is offered as a hobbyist machine without warranty. Dppk8Z

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Machine/vehicle number: 547, Turning diameter over cross slide: 500 mm, Turning length: 2,000 mm, Spindle bore: 55 mm, Power: 15 kW (20.39 HP), Equipment: Documentation/Manual, Hamlet E50/2 Year of construction: 1997 Center distance: 2 m Bolgwouzm03 Control: Sinumerik 805

Condition: good (used), Year of construction: 2004, Functionality: limited functionality, Machine/vehicle number: 1130.2148-03, One revolver (Sauter) is defective/needs repair - can be repaired on request TECHNICAL DETAILS Control unit: Sinumerik 840D Turning length: 850 mm Turning diameter over bed: 600 mm Turning diameter with external tools: 290 mm Speed range: 0 - 4500 rpm Tool carrier top right: 12 DIN69880-40x63 places Tool carrier bottom right: 12 DIN69880-40x63 places Main spindle direct drive: 47 kW at 40 % ED Cooling: Water cooling Torque: 640 Nm at 40 % ED Main spindle head: Size A6 according to DIN 55026 Spindle diameter in front bearing: 130 mm Spindle bore: Ø 82 mm Clamping drive: with full clamping cylinder for clamping device Center point: exchangeable Steady rest slide: bottom left NC-controlled Steady rest: self-centering, hydraulically actuated Workpiece stripper for self-centering steady rest: available Guide elements: Rollers Guide range: Ø 12 - 152 mm, centrally lubricated Tailstock: NC-controlled on its own guideway, fully reversible Pressure force 3000 - 8000 N, freely programmable Steep taper support: ISO 30, 1 R9Xvvdajkx MACHINE DETAILS Supply voltage: 400 V, 60 Hz Machine weight: approx. 11 t Space requirement: approx. 6.0 x 2.3 x 2.5 m EQUIPMENT - CE conformity label - Chip conveyor with coolant device, chip discharge on the right - Lynette - Many different tool holders / tools - PLC with Profibus periphery - "DESINA" (decentralized installation system) - Tool holder top right + tool holder bottom right - 1 support top right with 2 controlled axes - 1 support bottom right with 2 controlled axes - Complete documentation - "Safety-integrated" (integrated safety technology)

Year of construction: 1991, Condition: good (used), Functionality: unexamined, Equipment and accessories - CNC Siemens Sinumerik 820TE - 12-position turret head VDI 50 - tailstock Cusnaud - Various VDI 50 tool holders - 3 jaw chucks diameter 250mm - 3 jaw chucks diameter 400mm - various lathe chucks included Technical data - Swing diameter over bed 495mm - Swing diameter over slide 350mm - Center width 1250mm - max. weight of chuck parts 80kg - max. mass of center parts 400kg - Turning spindle head DIN 55026 size A2-8 - Speed range 6 to 4950 rpm - Main drive 41,5 kw - Machine weight approx. 8 tons -The machine was overhauled in 2009. -The guides are in very good condition - The documentation is available

Year of construction: 2001, Condition: excellent (used), MAKE: EMAG MODEL: VL5 D2Dmiq CNC: GE FANUC SERIES 18i TB Y.O.M: 2001 Max. Turning diameter: 300 mm Spindle diameter: 260mm Other info: The machine is complete in all its parts and accessories (manuals too)

Condition: used, Year of construction: 2015, Operating hours: 240 h, Functionality: fully functional, The used 2015 Haas TL-2 CNC Lathe, a stellar representation of versatility and performance. Located in Austria, this machine is the epitome of engineering excellence, sporting a robust control unit from Haas and boasting a substantial turning diameter of 450 mm suitable for a multiplicity of machining projects. The lathe's formidable 2000 rpm spindle speed combined with a 7.5 kW motor power assures high-efficiency operations and immaculate precision on every task undertaken. Technical specifications: Working hours: 240 H Dptm7H Control unit: Haas Turning length: 1500 mm Turning diameter: 450 mm Between centers: 1219 mm Chuck size: 203 mm X-Axis travel: 203 mm Z-Axis travel: 1219 mm Rapid feed rate X-Z axis: 11.4 m/min Spindle taper: A2-5 Motor power: 7.5 kW Spindle speed: 2000 rpm Spindle bore: 58 mm Dimensions: Length: 2760 mm Width: 1740 mm Height: 2110 mm Weight: 2032 kg Included with the Machine: -Quick release chuck. -Quick release changer. -A lot of tools. ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Condition: excellent (used), Year of construction: 2015, STOCK NUMBER Z100000511 CONTROL PANEL CELOS M730 UM MAX. TURNING DIAMETER 366 MM Bdkfsghwh MAX. TURNING LENGTH 705 MM X / Y / Z / B / C AXIS STROKE X 366 MM / Y +/- 50 MM / Z 705 MM / B 734 MM / C 360 ° MAIN SPINDLE DIAMETER 10 INC MAIN SPINDLE 4.000 MIN/-1 SUP SPINDLE MIRROR DIAMETER 6 INC SUP SPINDLE 6.000 MIN/-1 MIRROR MANUFACTURER KITAGAWA NUMBER OF TOOLPOSITIONS 12 SPINDLE SPEED - DRIVEN TOOL STATIONS 10.000 MIN/-1 TOTAL POWER REQUIREMENT 45 KVA WEIGHT OF THE MACHINE 6.400 KG DIMENSIONS OF THE MACHINE 2.10 X 3.68 X 2.20 M BAR LOADER LNS BAR LOADER PREPARATION IS AVAILABLE ADDITIONAL FUNCTION HIGH PRESSURE PUMP

Condition: used, Year of construction: 2002, Gildemeister CTX 400 S-2 CNC lathe Switch-on hours: 24386 h Equipment: - CNC control Heidenhain IT - TurnPlus control extension - Memory extension to 512 tools / 64 materials - C-axis - Tool drive - AC main drive 21 kW, 240 Nm - Partial hollow clamping device - Chip conveyor - Tailstock - Additional high-pressure coolant pump 20 bar, incl. additional coolant tank, 500 l and double switching filter - Overload clutches for the X- and Z-axis - 3-jaw power chuck Berg with bore, KH 200/68, incl. attachments - 8 x driven tool (3 axial, 5 radial) - Power unit and ball screw drive replaced Dpd7Eh - Chuck with hard clamping jaws and a tip for the tailstock - Bar machining package: - Hydraulic hollow clamping device - Drawtube inner diameter max. 66 mm - Workpiece pick-up device, hydraulically swiveling for parts ø 65 mm x 120 mm long - Connection for bar feed or bar loading magazine

Condition: good (used), Year of construction: 1999, Max Diameter: 300 x 250 mm X-Axis Travel: 150 mm Dppmnv Z-Axis Travel: 250 mm CNC Control System: Siemens Sinumerik 840 D Machine Weight: Approximately 12 tons (12,000 kg)

Condition: excellent (used), Year of construction: 2018, Description Equipment: - driven tools, with tailstock - 1 set (3 pcs.) of hard top jaws - turret with 12 tool positions, instead of 10-fold - automatic tailstock with rotor Spitz MK4 - Coolant pump type 5 (10 bar, 30 l/min.) Screen filter 20mesh - Automatic tool measurement with probe arm - Hinged belt conveyor, ejection to the right of the machine - Oil separator hose type - Workpiece removal with box from main spindle - Interface for bar loader - Torque monitoring (Tool Monitoring System) - 3 color light - Additional MPG (handwheel) General specifications: Working range/capacity Swing diameter over bed 600 mm Swing diameter cross slide 390 mm Max. Turning Ø 390 mm Recommended turning range/chuck Ø 210 kg Max. Turning length 513 mm Max. Workpiece weight Incl. clamping device / chuck part 120 kg Incl. clamping device / chuck part 320 kg Bar machining up to Ø 65 mm Travel paths X-axis travel 230 mm Z-axis travel 580 mm C-axis travel 360 (in 0.001) degrees Accuracy according to KS B 4207 / JIS B 6331 Repetition X-axis ± 0.002 mm Z-axis repetition ± 0.003 mm Repeat C-axis ± 0.006 degrees Machine dimensions Machine length 2940 mm Machine width 1628 mm Machine height 1700 mm Net machine weight 3700 kg Spindle height above floor 1030 mm Basic structure Bed inclination angle 30 degrees Machine bed - slideway guides - - Energy/supply Supply voltage/frequency 3Ph-AC400V/50Hz V/Hz Total connected load 30.43 kVA Compressed air supply Pressure 5 bar Compressed air supply Consumption 50 NL/min Main spindle Chuck Ø 210 (8") mm Dpqtwr Spindle nose A2-6 ASA Spindle bearing Ø, front 110 mm Spindle passage Ø 76 mm Drawtube passage Ø 68 mm C-axis Max. (without brake) 313 Nm Min. (with light brake) 229 Nm Braking torque C-axis 678 Nm Minimum indexing C-axis 0.001 degree Spindle motor Spindle drive (motor/belt) - Drive power (15 min./cont.) 18.5/15 kW Spindle speed 4500 rpm. Full power range 563~2254 rpm Gear ratio 1:1.331 Max. Spindle torque 313 Nm Tailstock Quill Ø 80 mm Quill stroke 80 mm Tailstock travel 580 mm Disk turret Tool holder type BMT55P Number of tool positions 12 ea Turning tool speed 5000 rpm Tool shank size 25x25 mm Boring bar holder Ø 40 mm Axes Rapid traverse X-axis 24 m/min. Rapid traverse Z-axis 30 m/min. Rapid traverse C-axis 200 rpm.

Condition: reconditioned (used), Year of construction: 2014, MAZAK QUICK TURN NEXUS 200-II MY Max. Machining diameter: 380 mm Max. Machining length: 538 mm Max. Milling speed: 4,500 rpm Max. Spindle speed: 5,000 rpm Max. Bar diameter: 65 mm Machine is equipped with: Bb0Jfosd - CNC CONTROL Mazatrol Matrix 2 - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: excellent (used), Year of construction: 1991, CNC vertical lathe with tool changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/retrofit Siemens 828D (retrofit) Faceplate diameter: 1,400 mm Face plate load: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger input bore: min. 340 mm Number of rams: 1 Ram cross travel: X 1,900 (+/- 950) mm ram vertical travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverse: X,Z 8,000 mm/min. Crossbeam vertical travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm. Gear stage: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on faceplate: max. 40,000 Nm Automatic tool changer: Tool magazine positions: 20 Tool radius: max. 200 mm Tool length: max. 675 mm Accessories: Large tool pack; Sdxuv7Auyz Large spare parts package; Large package of clamping jaws; Full cladding; Chip conveyor; Coolant system; New coolant and flood coolant pumps. Condition: Very good condition. The mechanical condition is very good. Completely new electrics and Siemens 828D Siemens ONE system. The machine works with very high accuracy. Offer number V(K)-6899

Condition: good (used), Year of construction: 2011, STOCK NUMBER Z100000516 Pskbhr88Pj MAX. SWING DIAMETER 330 MM MAX. SWING DIAMETER ABOVE CROSS-GUIDEWAY 260 MM MAX. TURNING DIAMETER 200 MM AXIS MOVEMENT X 160 MM / Z 450 MM / C 360 ° CONTROL PANEL SIEMENS 810 D MAIN SPINDLE 5.000 MIN/-1 MAIN SPINDLE DIAMETER 8 INC TOOL HOLDERS VDI 30 NUMBER OF TOOLPOSITIONS 12 SPINDLE SPEED - DRIVEN TOOL STATIONS 4.500 MIN/-1 NUMBER OF DRIVEN HOLDERS 6 WEIGHT OF THE MACHINE 3.400 KG DIMENSIONS OF THE MACHINE 1.54 X 2.80 X 1.75 M

Condition: good (used), Year of construction: 2006, Technical data shown on picture. Bi8Xtynaj8 Parts shown by hand not come.

Condition: used, Turning length: 500 mm, Spindle bore: 51 mm, Rotational speed (max.): 5,000 rpm, Turning diameter over bed slide: 420 mm, Center height: 245 mm, Equipment: Documentation/Manual, For sale here is a CNC lathe from Weiler in used condition! See pictures Machine will be sold free loading! Make: Weiler Model: Primus 2 CNC Turning diameter over bed: approx. 420 mm Turning diameter over support: approx. 220 mm Max. Speed: approx. 5,000 rpm Motor power: approx. 19 kW Centre height: approx. 245 mm Cxxkcztbpk Centre width: approx. 500 mm Jaw chuck Ø: approx. 200 mm Spindle bore: approx. 51 mm We are at your disposal for any questions! Sale ex location 42855 Remscheid, free loading! Can be loaded with a forklift. You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Errors in technical data and prior sale reserved.

Condition: good (used), Year of construction: 2015, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 51mm bar capacity, spindle speed 6,000rpm, 24 station turret, 15kW spindle motor, Coedbpnems milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light, and barfeed unit

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Eo327Wrsy2 Delivery time short-term Freight basis ex works Technical details turning diameter 250 mm turning length 520 mm control Haas chucking diameter 204 mm hollow 76 mm swing diameter 420 mm turning speeds 3400 U/min output 407 Nm Power 15 KW Tool changer 12 FACH total power requirement 20 kW weight of the machine ca. 4 t dimensions of the machine ca. 3.3 X 2 X 1.9 H m Additional information with manual guide (HAAS control)

Condition: good (used), Year of construction: 2019, Operating hours: 3,624 h, Functionality: fully functional, Turning diameter over cross slide: 430 mm, Turning length: 2,000 mm, Turning diameter: 460 mm, Spindle bore: 110 mm, Spindle speed (max.): 2,800 rpm, Spindle speed (min.): 12 rpm, Travel distance X-axis: 330 mm, Travel distance Z-axis: 2,070 mm, Spindle motor power: 37 W, Rapid traverse X-axis: 15,000 mm/min, Rapid traverse Z-axis: 20,000 mm/min, Rotational speed (min.): 12 rpm, Rotational speed (max.): 2,800 rpm, Total height: 23,250 mm, Total length: 59,100 mm, Total width: 26,630 mm, Power: 0.037 kW (0.05 HP), Okuma LB35-III M 2000. CNC lathe with C-axis and driven tools. Swing diameter over bed 700 mm. Swing diameter over support 430 mm. Max. Max. turning diameter between centers 460 mm. Turning length 2000 mm. Chuck diameter 380 mm. Main spindle drive power 30/37 kW. Spindle speeds 12 - 2800 rpm. C-axis 0.001°. 12-position tool turret. Tool holder VDI 50. Up to 12 possible driven tool positions. Khjatoh0 Tailstock. Chip conveyor. Steady rest 150 - 280 mm. Tool setting. Super condition. Offer number L-4869.

Condition: good (used), Parts shown by hand not come. Btqx98A3Xk Machine is without Y axis. Live tools are on both turret.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, Dpoidf 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, parts conveyor .

Year of construction: 1999, Condition: excellent (used), CTX 400 S2 3 AXIS FROM 1999 Fabricant GILDEMEISTER Modèle CTX 400 Rkapk938 Année 1999 Condition used Adresse Frankreich, France Prix Catégorie Metal Processing Sous catégories Lathes Numéro de stock 1105-03558 Numéro de série Controls CNC, Heidenhain CNC Pilot Country of origin Germany Delivery time IMMEDIATELY Delivery terms ex site, free loaded on truck Turning diameter 570 mm Turning length 635 mm Turning diameter over bed slide 420 mm Spindle turning speed - stepless 25-5000 U/min Number of driven tools 6 mm Drive 5 kW Description CNC HEIDENHAIN Pilot 4232 C-axis with 6 driven toolings 10 FIXED VDI 30 TOOLING 1 CHUCK + CHIP CONVEYOR BAR LOADER SAMSYS