Used Semi Automatic Screen Printing Machine for sale (82,055)

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Automatic Stacker: NATGRAPH Raised Fully Cleaned Bdjdpfx Asy Twkmsmned

Condition: used, Year of construction: 2009, printing size 75x105cm, parallel lift, moving printing bed, with gripper system and belt delivery to the right, infinitely adjustable squeegee stroke, with pneumatic squeegee pressure control, screen frame insertion from the front, with pneumatic squeegee clamping, control panel with keyboard (useable on the left or on the right side), max. sheet size: 78x108cm, max. screen frame size: 120x140cm, additional with cleaning unit model TEKNEK, completely with 3sets squeegees and floodbars, connection: 380/400V, 50Hz, compressed air 6bar necessary. Used, year of construction: 2009, will partly be overhauled and will then be technically and optically in mint condition. Bjdpfx Amjyu Tu Aonjdd

Condition: new, Year of construction: 2023, Semi-Autom. Screen Printing Machine TIC SC1000 OptiPass Curve printing machine, stand model, printing size: 200x700mm or printing ø: 600x700mm (Attention: when ø 600mm no 360° all-round printing possible), max. screen frame size: 930x530x30mm. Machine with base frame and height-adjustable feeding table incl. x/y-adjustment. Height adjustment of the feeding table: approx. 250mm, therefore max. height of the printing object: approx. 600mm. With safety frame all-around the sides of the upper frame, equipped with 2sets of squeegee, motor-controlled lateral frame movement for curve printing and rotation of the printing object, machine control via touch-panel, registering by optical sensor, when printing in multi-colour-mode register accuracy is approx. 1mm, drive components 'Made in Japan', compressed air connection: 6bar, supply voltage: 230V, 50Hz Bjdpfx Ajhrdn Iomnodd Electro-pneumatic machine, micro-processor control. Curve printing machine with universal reception for cylindrical objects as well as optical fitting system for multi-colour printing, with inflation device, printing movements separately adjustable during set-up operation, squeegee stroke, squeegee speed and floodbar infinitely adjustable Delivery time 16-18 weeks

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Bjdpsw H Naajfx Amnedd Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Bedpfxow Eb Uas Amnedd Automatic Stacker: SPS AUTOSTACK 2

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. Bjdpjy I Iz Eofx Amnedd If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2004, Sakurai Front Pick up Automatic Suction Feeder Sakurai Aktiprint SK UV Dryer Sakurai Automatic Stacker Bjdpfxjww Eils Amnedd Fully Cleaned

Condition: new, Year of construction: 2026, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Bjdpfxji D D A Ss Amnedd Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, total length: 5,050 mm, total width: 5,050 mm, total height: 1,850 mm, compressed air connection: 8 bar, type of input current: three-phase, year of last overhaul: 2025, overall weight: 2,100 kg, power: 2.5 kW (3.40 HP), 𝐌𝐇𝐌 𝐒𝐲𝐧𝐜𝐡𝐫𝐨𝐩𝐫𝐢𝐧𝐭 𝟑𝟎𝟎𝟎 (𝟐𝟎𝟎𝟒) – 𝟖/𝟏𝟎 – 𝟑 𝐅𝐥𝐚𝐬𝐡 𝐂𝐮𝐫𝐞 𝐔𝐧𝐢𝐭𝐬 – 𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐭 𝐂𝐨𝐧𝐝𝐢𝐭𝐢𝐨𝐧 - 𝟔 𝐦𝐨𝐧𝐭𝐡𝐬 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 Automatic screen printing press, 8 print heads, 10 stations, with large format printing capability—can print up to 70x100 cm (27.5 x 40 in) on every station. After being purchased new, it was stored unused for approximately 8 years, with a total output of only 500,000 prints. This machine has been extremely well maintained, regularly cleaned and lubricated, and used in an immaculate working environment. In addition, it underwent a complete overhaul and professional refurbishment by a certified MHM technician last year. New parts (air hoses, electrical components, etc.) were installed wherever necessary to ensure it operates like a new press. Only 10,000 prints have been made since refurbishment. Indexing, print heads, touchscreen controls, and all systems are operating flawlessly. (Additional videos available upon request) • 8 colors / 10 stations • Fully refurbished • All print heads work perfectly • Includes: • 3 flash cure units • 2 sets of MHM honeycomb pallets (50x100 cm, 75x120 cm) • 3 sets of squeegees and floodbars (37 cm, 50 cm, 70 cm) • Machine can be demonstrated in production • Location: Serbia Bdedpey A Eu Eefx Amnsd Crjb Az Isy A Eu Esbmbeb • EU-wide transport can be arranged (typically €1,000–€1,500 depending on destination) The machine is in excellent condition, fully functional, and immediately ready for production—no additional investment required. It has been regularly serviced and exclusively used in a professional setting. 6 months warranty will be issued to the buyer that all heads, indexing, touch screen control panel and flash cure units all are working properly. • Mechanically and electrically flawless • Inspection possible at any time • Ready for direct integration into your production

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, We offer for sale a professional manual screen printing press: M&R Chameleon, 10 colors / 4 stations, year of manufacture: 2007. Bedpey E Ay Dsfx Amnsdd This is a legendary model, recognized as the most precise and stable carousel press in the world. The machine is in very good technical and visual condition and is ready for immediate operation in a professional print shop. Key specifications and advantages: • Configuration: 10 colors / 4 stations (enables printing of very complex designs on a small area). • Duo-Deck™ system: Unique dual-level construction allowing operation of 10 colors while maintaining compact dimensions. • Side Clamps: Provide exceptional screen stability and eliminate vibration during printing. • Air Locks: Pneumatic locking system enabling quick and tool-free frame setup and replacement. • Micro-registration: Precise registration along three axes, maintaining accuracy even over very long runs. • Origin: M&R brand – guarantee of spare parts availability and service support. This press is perfectly suited for high-end quality printing, pattern creation (sampling) for automatics, or as the main machine in a boutique print shop focused on quality.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). Bdjdpfx Ajy Evirjmnsd - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: ready for operation (used), Year of construction: 1996, Offered is a repair-needing single-color pad printing machine Tampoprint. Doctor cup diameter: 90mm, max. print image diameter: 85mm, cliché size: 100×215mm, printing force: approx. 1100N, max. pad stroke above printed material: 110-150mm, pad stroke above cliché: 40mm, max. pad installation height: 92mm. Machine weight: approx. 120kg, dimensions X/Y/Z: 600mm/1000mm/900mm. The machine is mechanically in order, but only prints in continuous operation, and the dwell time function is no longer available. Inspection possible by arrangement. Bsdpfx Amezidkcjnsdd

Condition: new, Semi-automatic band saw for cutting medium and large-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Band control with a motor driven by an inverter and a special gearbox with a bronze gear and a hardened and ground worm gear. Appropriately sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide inserts. Band tension is achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Bsdpfx Ajfh R Tusmnodd Brush band cleaning device Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for band cooling Vise, jaw height: 250 mm Vise, jaw length: 200 mm Work table height: 760 mm Machine weight: 1250 kg / 12260 N

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. Bdodpfx Ajfibd Tsmnjd The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Worktable height: 760 mm. Machine weight: 820 kg.

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Bdsdpfx Amsfibfajnjd Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor, and the special gearbox, complete with a bronze gear, features a hardened and ground worm gear. Appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable tungsten carbide inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned during blade rotation. Equipped with a safety device to prevent accidents on the flywheel cover and the blade, the machine is completed by a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor 2. lowers the saw frame for cutting Bedpfxjfh R Tys Amnodd 3. the saw frame returns to its starting position 4. stops the bandsaw motor 5. opens the vice Manual cutting option available. Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range: 45° left to 60° right Stop for cuts of the same size: Adjustable Electric pump for bandsaw cooling: 0.06 kW

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display Bdodpjxdr Rtsfx Amnsd

Condition: excellent (used), Year of construction: 2002, operating hours: 20,000 h, functionality: fully functional, working width: 1,700 mm, type of input current: three-phase, total width: 4,500 mm, total length: 8,030 mm, total height: 2,150 mm, power of the servo motor: 20 W, overall weight: 34,000 kg, input voltage: 380 V, Semi-automatic die-cutting machine. Manual sheet feeding, Bsdpjzidhbofx Amnjdd die-cutting section, waste removal section, and palletizing.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: SEAS5050121038350, input voltage: 400 V, total length: 4,000 mm, total width: 4,000 mm, total height: 1,400 mm, compressed air connection: 6.9 bar, type of input current: three-phase, overall weight: 1,565 kg, Automatic screen printing machine M&R Sportsman “E” in very good working condition, manufactured in the USA and known worldwide for its reliability and consistent print quality. The machine is designed for professional textile production and is ideal for medium to high-volume orders. It operates on 400V, 3-phase, 50/60 Hz and requires 100 PSI compressed air. Maximum image size is 50 x 50 cm with a maximum frame size of 66 x 91 cm. The total machine diameter is approximately 3.6 meters. The construction is robust and built for long-term industrial use, offering smooth operation, precise registration, and easy maintenance. Compatible with flash cure units and conveyor dryers. The machine has been maintained and is ready for immediate production. It is currently dismantled and prepared for shipping. Inspection is possible by prior arrangement. Bdodpfxoyvkzws Amned

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. Bdedpfx Ajycqhcemnsd The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Bdedpfsy Tu Rqex Amnjd Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Bodpfjxwnw Aox Amnsdd Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Condition: good (used), Year of construction: 1995, Sakurai SC 102DX Year: 1995 Max speed: 5500 sh/h Max sheet size: 105 x 705 cm Bdjdpfx Amoyxazfonjd Min sheet size: 49 x 29,7 cm Trumax dryer Trumax stacker Available immediately Very good working condition

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Automatic Textile Printing Machine VERSATRONIC S-line 🔹 Configuration: • 8 stations/pallets • 6 printing heads • Maximum print area: 400 x 450 mm • Pallet drive: frequency-controlled AC servo drive 🔹 Squeegee-drive system: • AC servo high-precision drive • 4-cylinder POWER-Squeegee system 🔹 Main Control Unit: • Rotatable control panel with 7” SMART touch display • Microprocessor with diagnostic program 🔹 Printing Programs: ✅ 6 standard printing programs ✅ High-density program ✅ MULTIFLASH program ✅ Cool-stop mode Bdsdpfxov Ng T Rj Amnsd ✅ Sampling program ✅ Start-up/finishing program ✅ Screen-Cleaning mode, stopping pallets between print stations Fobqfb Ijv Ng T Reitjgf ✅ Free-wheel-mode _____ 2. Accessories • 8 pcs aluminum sandwich pallets 420 x 500 mm with neck • 8 pcs aluminum sandwich pallets 320 x 500 mm with neck • 8 pcs aluminum sandwich pallets 230 x 500 mm with neck • 8 pcs aluminum sandwich pallets 130 x 500 mm without neck • 6 pcs QS-printing squeegees 410 mm, 65° Shore • 6 pcs QS-printing squeegees 310 mm, 65° Shore • 6 pcs QS-printing squeegees 210 mm, 65° Shore • 6 pcs QS-printing squeegees 120 mm, 65° Shore • 6 pcs aluminum flood bars 410 mm • 1 pcs squeegee holder for wall mounting • 6 pcs micro-registration systems with control on each printing head • 6 pcs 3-point pneumatic screen-locks 🔹 Machine Dimensions: • For a print size of 400 x 450 mm, a frame of 530 x 780 mm is required (profile: 25x25/30x30 mm) • Machine diameter: 3.080 mm 🔹 Energy Requirements: • Power supply: 3x400V V, PEN, 3.7 kW, 5.6 A • Compressed air: 8 bar, approximately 300 liters/hour 🔹 Transport Dimensions: • S-LINE 8: • Gross weight: approximately 900 kg _____ possible to buy to the additionaly: 3.1 Automatic Quartz-flashcure MAGIC 5025 • Medium-wave IR radiators • Radiation area: 500 x 500 mm • With IR-Pyrometer for continuous measurement of print material temperature • Ensures constant temperature throughout the printing process, preventing overheating of textiles and pallets • Power supply: 9 kW, 14 A, 3x400V • Movable stand with wheels + 2500,- € + VAT

Condition: used, Year of construction: 2022, The MAG 1 Peroni Ruggero is a modern, semi-automatic machine designed for manufacturers of premium packaging, magnetic boxes, and exclusive cardboard packaging. The machine combines several operations in a single work cycle, significantly increasing production efficiency and ensuring the highest precision. The machine performs milling of slots in solid cardboard, automatically applies hot-melt adhesive, and inserts magnets or metal plates into the prepared locations. This ensures that the entire process is fast, repeatable, and requires minimal operator intervention. The material is fed manually, while all key production steps are carried out automatically. An advanced positioning system guarantees accurate placement of the components, which translates into high-quality finished products and aesthetically pleasing packaging. The MAG 1 allows the application of 1 to 6 magnets or metal plates on one side of the packaging in a single work cycle, providing high production flexibility and the ability to handle diverse projects. The machine has been used sparingly and is in very good technical and visual condition, ready for immediate use in a production facility. Key benefits: - Milling, gluing, and magnet application in a single work cycle - Handles 1 to 6 magnets or metal plates simultaneously - High precision and repeatability of the process - Dedicated to the production of magnetic boxes and premium packaging - Automatic application of hot-melt adhesive - High efficiency with limited operator intervention - Very good technical and visual condition - Year of manufacture: 2022 Technical data: - Manufacturer: PERONI RUGGERO - Model: MAG 1 - Year of manufacture: 2022 - Serial number: 007 Supported materials: - Solid (gray) cardboard with a thickness of 1.5 to 4 mm - Magnets with a diameter of 9.5 to 15 mm - Magnet thickness: 1 mm, 1.5 mm or 2 mm - Range of processed element: - Minimum width: 180 mm - Maximum width: 1550 mm Performance: - Up to 14 cycles/min when applying 1 magnet - Up to 8 cycles/min when applying 2 magnets Technical parameters: - Power: 5 kW - Compressed air consumption: 150 NL/min at 6 bar - Machine dimensions: - Length: 2500 mm - Width: 2500 mm The MAG 1 is an ideal solution for manufacturers of premium packaging who want to automate the magnet application process, increase production efficiency, and achieve the highest quality of finished products. Bdodpfx Aszbtpgemnsd