Used 2 Colour Press for sale (85,611)

Condition: reconditioned (used), Hydraulic hot press 25×13 Rsdpfsycg Sksx Aamsn Manufacturer: ORMA Model: 25×13 [Code: PRS-040] USED MACHINE – V380/50 Press plate dimensions: 2500×1300 mm Plate heating with hot water 4 cylinders Max pressing force: 70 TON Prepared for connection to centralized system NEW PLATES (coils + metal sheets)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Rodpfx Asx Dnb Ujamjn Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 1992, Technical details: volume capacity: 1,95 m³/min feed pressure: 10 bar Number of working hours: 9166 h total power requirement: 15 kw weight of the machine approx.: 360 kg Redpfxou Nzypo Aamon space requirements of the machine approx.: L:1,54xB:1,3xH:1,2 m compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top used condition We don't sell spare parts nor have spare parts available! *

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm Rjdpfx Asqa I Hneamsn -Weight: 16 kg/pc.

Condition: like new (used), For sale is a lot of high-quality aluminum industrial profiles with large cross-sections. The profiles are as new & unused, making them ideal for applications in mechanical and plant engineering, fixture construction, frame building, or hall construction. Technical data: Quantity: 30 pieces of 5.27 m each + 1 piece of 4.04 m Cross-section: 130 mm x 50 mm Total length: 161.14 m Material: aluminum extruded profiles Total weight: approx. 725 kg Profile type: T-slot profile / construction profile / industrial profile (solid, multi-chamber) Features: Highly stable and torsion-resistant Lightweight and easy to process Corrosion-resistant Ideal for load-bearing structures Rodpfx Asxbyx Hjamsn Condition: As new / unused Minor storage marks possible Logistics: Goods bundled on pallets Collection by arrangement possible Shipping available on request for an additional charge

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,419 h, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, Equipment: documentation/manual, emergency stop, lower tooling, upper tooling, I am offering a GWF Mengele press brake HB60-17/20 here. Tool length: 2000 mm, 60t press force. The machine is well maintained but has been idle for about a year. Control: Cybelec V-DNC-1200/B. Year 2001 – 9419 operating hours. Includes hemming tool and press brake tool. Wila clamping system. Price is net ex location, plus applicable VAT. A mobile crane for loading can be arranged at short notice. Rjdpfox T Daujx Aamon

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! - Rjdpfoq D Dzljx Aamsn

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Redpfeuf Nr Ajx Aamsn Clear distance between uprights: 2,555 mm Machine length: 3,785 mm Machine width: 2,290 mm Width without support arms: 1,740 mm Overall height: 3,100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration.) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust, double-guided backgauge - Backgauge fingers double-guided on linear rails - Movable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Foot pedal with emergency stop - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - Delem DA 66t CNC control - R-axis backgauge CNC-controlled - CNC-controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (4 in total) - 1 set of upper and lower tools Further bending lengths and capacities available with appropriate accessories!

Condition: new, Fully automatic sawing and punching or drilling in a single machine! Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Compatible with Ø 500 or 550 mm saw blades, reversible mechanism for cut lengths up to a maximum of 4000 mm. Saw-Punching Automation System Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching based on the Profilma 502 model • Fully automatic operation and Saw-Drilling Automation System Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously Rsdsx Haftjpfx Aamen • Fully automatic operation

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Rodpfx Asmnqkisamsn

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. Application Types Stamping Rjdpfxox E Ea He Aamjn

Year of construction: 2005, condition: excellent (used), machine/vehicle number: AAC02761-0502-6018 REV 3, Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: - Dust extractor - Plate gumming device Redpfxsh N Dwuo Aamjn - Destacker - RIP

Condition: good (used), Manufacturer: MÜLLER Tip: SDZ 63t Rjdpen D Eiajfx Aamon Table surface: 620x500mm Pressure: 63 t

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. Redpefim Dwofx Aamsn ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm

Condition: used, Year of construction: 1995, functionality: fully functional, Press platen (working area) 2500 mm × 1300 mm Maximum workpiece (panel) length 2500 mm Maximum workpiece width 1300 mm Workpiece thickness (typical operating range) min ~ 12 mm, max ~ 50 mm (for standard configuration) Total pressing force / pressure capacity up to ~ 90 tonnes (depending on configuration) Rsdpfx Aex Ezpwoamsn Heating / Heating plates thermal-oil heated platens; working temperature up to ~ 120 °C (in heated-platen version) Power supply / Installed power (some listings) earlier listing cites ~ 5.5 kW for cold-press version. 6 vertical cylinders (for platen pressure) in some full-spec versions.

Condition: used, total width: 1,400 mm, total length: 2,900 mm, total height: 2,000 mm, Empty weight: 1.300 kg Cold Veneer Press Italpresse Jolly/F Press surface 2500x1200mm Press opening 510mm 4 cylinders Total dimensions 2900x1400x2000mm (LxWxH), weight 1300kg - Documentation available: No - CE certificate present: No - Serial number: 1426 - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1200 - Number of cylinders [pcs]: 4 - Transport dimensions: 2900mm x 1400mm x 2000mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Redewnhg Ispfx Aamon VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Weight: approx. 400 kg Rodpfxoxwykus Aamjn

Condition: used, Technical data: Number of pistons: 4 Piston diameter: 45 mm Connection to central heating: NO Shelf dimensions: 2500x1200 mm Rodpfx Aaexzrt Aemjn Clearance: 460 mm Hydraulic pressing Motor power: 2 kW Power supply: 380 V Overall dimensions: Length: 2900 mm Width: 1370 mm Height: 2150 mm

Condition: used, Technical data: Number of pistons: 8 Piston diameter: 90 mm Connection for central heating Shelf dimensions: 1300x3500 mm Clearance: 400 mm Hydraulic pressing Pneumatic side clamps Number of clamps: 9 Safety switch Rodpexzdtnefx Aamjn Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 4200 mm Width: 1700 mm Height: 2350 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, pressing force: 26 t, Baler ORWAK Compactor 3325 Pressing force: 26 tonnes / 260 kN Rodpfx Aajx Hfi Remjn Year of manufacture: 2023 Very good condition!

Condition: used, operating hours: 48,000 h, Manufacturer: Alup Motor: 22 kW Rodpfxsur N Tbj Aamen Output: 3.9 m3/min Loaded operating hours: 48,000 h

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 Rjdpour Ravefx Aamon The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 23,000 mm, total width: 7,800 mm, total length: 10,400 mm, pressing force: 25 t, table width: 780 mm, table length: 200 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, stroke length: 480 mm, operating pressure: 230 bar, oil tank capacity: 20 l, power: 3 kW (4.08 HP), MULTI-PURPOSE workshop / press Available in both 20 and 25 tons. Rjdpfjt A Dznex Aamsn BAR-MAN 20: 3,450 euros BAR-MAN 25: 3,990 euros The BAR-MAN can be used for a wide range of applications. Examples include maintenance work, cutting keyways, pressing bearings in and out, and much more. With this powerful machine, you can tackle almost any task, all while maintaining maximum operator comfort.

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 880 kg, Specification: Protection rating: IP54 Control voltage: 24V DC Fuse: 16A Rsdpfx Aswq R Rhoamen Power: 0.5kW The hydropneumatic press with feeder from Tox Pressotechnik is a versatile and efficient solution for the precise and reliable processing of a wide range of materials. By combining hydraulic power and pneumatic control, it allows for uniform force transmission as well as fast and controlled operation. The integrated feeder ensures a smooth material flow, increasing productivity and optimizing the production process.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 663462, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Type: STE341-7210 SF device Power: 0.5 kW Power supply: 230/3/50-60 V/A/Hz Control voltage: 24 VDC Protection rating: IP54 Pre-fuse: 16 A Rjdpfx Aowtgpxoamon The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling.