Used Press Brakes for sale (29,851)

Condition: excellent (used), Year of construction: 2006, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Machine type: hydraulic CNC bending press Manufacturer/Model: TRUMPF TrumaBend V1300 Year of manufacture: 2006 Operating hours: 109,800 h Approximate weight: 12,950 kg Performance data Press force: 1,300 kN Bending length: 3,230 mm Free clearance between uprights: 2,690 mm Overhang: 420 mm Stroke: max. 215 mm Ljdpfxjz S D Tuo Akmshn Optional stroke: 445 mm Table-beam distance: max. 505 mm Optional table-beam distance: 735 mm Usable installation height: 385 mm Optional installation height: 615 mm Table width: 120 mm Working height: 1,050 mm Angle of ram: ±10 mm Back gauge and tool clamping Back gauge system: 4 axes Upper tool clamping: hydraulic Crowning: CNC Machine dimensions Length: 3,640 mm Width: 2,060 mm Height: 2,285 mm EQUIPMENT 4-axis back gauge system Hydraulic upper tool clamping CNC crowning

Condition: repair required (used), functionality: not functional, Year of construction: 1993, oil tank capacity: 390 l, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, pressing force: 150 t, table length: 3,550 mm, type of input current: three-phase, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection Lsdpoz E U Dpofx Akmehn The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 6,560 h, machine/vehicle number: B0501A0285, stroke length: 215 mm, throat depth: 420 mm, operating speed: 220 mm/s, reverse speed: 220 mm/s, table height: 950 mm, overall weight: 4,900 kg, total length: 2,190 mm, total width: 1,740 mm, total height: 2,375 mm, input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, pressing force: 50 t, clearance between the columns: 1,040 mm, table length: 1,275 mm, table width: 100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, I am offering my well-maintained TruBend 5050 for sale. It has no defects, no quirks, and no hidden costs. You are welcome to inspect and test it at any time. I can also take care of the loading. The setup is also not complicated. The buyer is responsible for arranging the shipping. This machine is being offered for sale solely for tax-related reasons. We do not need to and, above all, do not want to sell it below its market value, as it is very reliable and we have grown attached to it. Anyone who is genuinely interested is welcome to contact me. And yes, these are the original operating hours. Nothing has been replaced, falsified, or anything of that nature. The machine has been used very little by both the previous owner and us. The last maintenance was some time ago, but everything else is in absolutely original condition. From the operating manual to the last screw. Lhsdpfjzlutajx Akmsn

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Ljdpfetwliwox Akmohn Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun E21, stroke length: 150 mm, throat depth: 320 mm, overall weight: 9,800 kg, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, input voltage: 400 V, pressing force: 125 t, table length: 32,000 mm, table width: 2,650 mm, type of input current: three-phase, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. Lhodjzlpanspfx Akmsn The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 100 t, clearance between the columns: 2,600 mm, Make: Gasparini Model: PSG 100 Year of manufacture: 1994 Type: Press brakes Control: CNC Controller: upgraded DELEM DA-65R controller Crowning: yes (hydraulic crowning) Press force (tons): 100 tons Working width (mm): 3000 mm Lheds Aa Dc Dspfx Akmon Distance between columns (mm): 2600 mm Throat depth (mm): 360 mm Back gauge stroke (mm): 650 mm Power (kW): 7.5 kW Dimensions L x W x H (mm): 3500 x 1550 x 2600 mm Machine weight (kg): 9000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, stroke length: 500 mm, operating speed: 10 mm/s, reverse speed: 30 mm/s, overall weight: 4,800 kg, total length: 2,010 mm, total width: 1,600 mm, total height: 2,200 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, pressing force: 560 t, clearance between the columns: 1,260 mm, table width: 1,400 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this very good Boschert Quick-Bend 56 CNC press brake, manufactured in 2018. Manufacturer: Boschert Model: Quick-Bend 56 CNC Year of manufacture: 2018 Lhsdpfxoy Nbw Ao Akmon Condition: very good Category ID: 1466 Type ID: 1717 Machine type: press brake If you have any further questions or need more information, please send us a message or give us a call.

Condition: good (used), functionality: fully functional, Year of construction: 2012, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, pressing force: 55 t, type of input current: three-phase, Durma IW 55 Combination Machine (Punching and Shearing) For sale: a Durma IW 55 combination machine (punching machine + ironworker-type shear), with a capacity of 55 tons. Well-maintained, fully operational, and available for inspection at our facilities in Zaragoza, Spain. Manufacturer: Durmazlar (Turkey) Type: IW 55/110 Motor: 5.5 kW, three-phase, 50Hz Lhsdpfx Aez Hla Djkmen Operating voltage: 400V — Control voltage: 24V Current: 11.5 A — Fuse: 16A Cutting capacities: L-profile at 90° 120x120x10mm, L-profile at 45° 70x70x7mm, flat bar 300x15mm, round bar Ø40mm, square bar 40mm, punching Ø40x10mm Material capacity: up to 45 kg/mm² (65,000 psi) Includes punching and die tooling For technical inquiries or to arrange a visit, please contact us by email. Price: €6,500 (negotiable), VAT not included. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 20658, stroke length: 250 mm, throat depth: 305 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table height: 980 mm, oil tank capacity: 350 l, overall weight: 22,500 kg, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 320 t, clearance between the columns: 3,760 mm, distance table to ram: 500 mm, ram plate length: 4,500 mm, table length: 4,800 mm, table width: 250 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Lhjdpfxszktg Aj Akmsn Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: good (used), functionality: fully functional, Year of construction: 1992, operating hours: 8,600 h, overall weight: 5,200 kg, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, pressing force: 80 t, Amada Promecam Press Brake 80-25 CNC Press Brake, 80 tons, 2500mm bending length. In perfect working order, easy to operate. Robust machine. Only 8600 operating hours. Can be inspected and tested before purchase. Lhodpfxjz Rqxhe Akmen German operating manual included.

Condition: good (used), functionality: fully functional, Year of construction: 2006, stroke length: 200 mm, overall weight: 11,600 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, input voltage: 400 V, pressing force: 170 t, clearance between the columns: 2,700 mm, distance table to ram: 350 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Tool clamping system: Wila Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control system and Wila tool clamping system. Ljdpfxez S Nuqe Akmehn The machine is used but still in good working order. One set of tools is included in the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon request. Can be loaded on October 21st in Waanrode, Belgium.

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex-works: CNC Trumpf press brake Type Trumabend V 130 Year of manufacture 1996 CNC control Delem DA 65 Bending length 3060 mm Distance between uprights 2690 mm Upright overhang 410 mm Ledpo Aa Iq Ssfx Akmohn Stroke 365 mm Installation height 535 mm Rapid traverse speed 200 mm/sec Working speed 1 – 10 mm/sec Return speed 135 mm/sec Table width 120 mm Angle adjustment plus/minus 10 mm Tools: one set of upper tools OW 209 with blade and one set of lower tools EV OO4/W 12, each 3000 mm Weight 12950 kg Price: EUR 10,750.00 plus VAT ex-works

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment Lhjdsz Sva Hjpfx Akmsn

Condition: like new (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 00031444-ER, stroke length: 275 mm, throat depth: 410 mm, operating speed: 160 mm/s, reverse speed: 165 mm/s, table height: 900 mm, oil tank capacity: 150 l, overall weight: 4,320 kg, total length: 3,175 mm, total width: 2,100 mm, total height: 2,580 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 60 t, table length: 1,270 mm, Equipment: documentation/manual, Manufacturer: ERMAKSAN Model: Speed-Bend Pro 1270×60 Machine type: CNC Hydraulic Press Brake The ERMAKSAN Speed-Bend Pro 1270×60 is a high-precision CNC hydraulic press brake designed for accurate and efficient sheet metal bending. With a maximum bending force of 60 tons and a bending length of 1,270 mm, this machine is suitable for a wide range of industrial sheet metal processing applications. Technical Specifications Maximum bending force: 60 tons (600 kN) Maximum bending length: 1,270 mm Ram stroke: 275 mm Table height: 900 mm Table width: 90 mm Lhodpfx Aksz Slyqomon Main motor power: 7.5 kW Power supply: 400 V, 3-phase, 50 Hz CNC control: Delem DA-66T (depending on machine configuration) Tool Clamping System: European-style tooling clamping system Side safety guards Foot control: Dual foot pedal Electrical system: Siemens Hydraulic system: Hoerbiger hydraulic system Controller: CYBELEC CYBTOUCH 15PS 2D Upper Tooling (Punch): Rolleri PS 135.85.R08 Machine available from January 16, 2027.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg Lhsdpoz A Ia Sofx Akmen without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Machine type: Press brake Performance Data Lodpj Adzr Rofx Akmjhn Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, stroke length: 265 mm, throat depth: 410 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 6, table height: 900 mm, oil tank capacity: 250 l, overall weight: 12,500 kg, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, pressing force: 175 t, clearance between the columns: 3,600 mm, distance table to ram: 530 mm, table length: 4,050 mm, table width: 104 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Lsdoz Imc Nspfx Akmshn Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: good (used), functionality: fully functional, Year of construction: 2000, operating hours: 29,075 h, stroke length: 200 mm, overall weight: 4,700 kg, power: 9 kW (12.24 HP), input voltage: 400 V, input current: 20 A, input frequency: 55 Hz, pressing force: 50 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, We are selling a 2-meter sheet metal bending machine. The machine was used exclusively for thin sheet metal processing in our production facility. Manufacturer: AMADA Model: HFE 50-20s Year of manufacture: 04/03/2000 Condition: good (used) Lsdpjz R Rl Ajfx Akmjhn Operating hours: 29,075.7 hours 500 KN Max. stroke: 200 Weight: 4700 Noise level: less than 75 dB Voltage: 400 V / 50 Hz Rated current: 19.9 A UVV inspection carried out according to schedule / maintenance always performed by Amada according to schedule! The machine can be inspected under power in DE-84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty! The buyer must disassemble and collect the machine.

Condition: good (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 12871, controller manufacturer: DELEM, controller model: EA 22, oil tank capacity: 120 l, overall weight: 10,000 kg, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake - including foot switch and the bending tool located on the machine Lsdpfxsz I N D Ns Akmjhn FCA D-35614 Aßlar - loaded onto a truck

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220113, total length: 3,500 mm, total height: 2,500 mm, total width: 1,500 mm, overall weight: 12,500 kg, feed length X-axis: 3,000 mm, input voltage: 400 V, type of input current: three-phase, We offer this used CNC edge banding machine, Otinus WC67Y-250/3200, manufactured in 2022. Manufacturer: Otinus Model: WC67Y-250/3200 Year of manufacture: 2022 Machine type: CNC edge banding machine Bending compensation Lhjdpo Adgrpjfx Akmsn If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Lhjdey Shc Djpfx Akmen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESSING PERFORMANCE Pressing force: 150 t BENDING RANGE Bending length: 3,100 mm ELECTRICAL DATA Operating voltage: 3 × 380 V Frequency: 50 Hz Rated current: 63 A MACHINE DETAILS Manufacturer: Beyeler Type: RH 150-3100 Lodpfx Ae Advdbokmohn Machine type: Press brake Year of manufacture: 1990 Manufacturing number: 590112896 Length: 4,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 8,500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 94,201 h, control type: CNC control, bending force (max.): 400 t, installation height: 595 mm, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, Ledpfez Rmcvex Akmshn 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Lhjdpfx Asvfy Sxskmen Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 7,300 h, stroke length: 400 mm, operating speed: 140 mm/s, reverse speed: 180 mm/s, oil tank capacity: 350 l, overall weight: 14,800 kg, total length: 6,350 mm, total width: 3,590 mm, total height: 3,220 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 175 t, clearance between the columns: 3,550 mm, distance table to ram: 720 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, EHT VarioPress 175-40, approx. 7300 operating hours, original EHT tooling, straight bending tool 420 mm x 4000 mm, split, forming pad 220 mm x 4000 mm, split, 2 sets of dies, split, pneumatic tool clamping system, top and bottom, automatic crowning, 2 x adjustable material support arms, table/punch distance, min.: 320 mm, table/punch distance, max.: 720 mm, 3 stop fingers, manually adjustable, Lhjdpfxe Aa Nz Ss Akmjn 2 sets of upper tools, 1 x forming pad 220 mm, 1 x straight tool 420 mm, original operating manual and electrical diagrams available, annual maintenance and safety inspection carried out, last maintenance in 2025.