Used High Frequency Press for sale (44,523)

Condition: excellent (used), Year of construction: 2022, High frequency panel Press Orma Model LS ECO 25/13 Year of production: 2022 Technical condition: very good Manufacturer: Orma Macchine – Italy Work Table and Feed System: • Work dimensions: 2500x1300 mm, 3.25 m² • Mechanical pusher: length 2500 mm, used for advancing pieces into the press; fixed pushing speed; pushing bars operated by a chain system • Limit switch for stopping the press at the end of the work table • 1 foot pedal for moving pieces on the work table • 1 emergency stop button _____ Hydraulic Press Model LS/ECO: • High-frequency platens, dimensions: 2500x1300 mm • Mobile lower platen • Vertical pressing system: o 4 vertical pressing pistons with a diameter of 70 mm, maximum total force of 40 tons, stroke/opening: 150 mm • Horizontal pressing unit: o Consists of 5 double-acting pistons with a diameter of 40/25 mm that operate 5 steel pressing plates; stroke/opening: 150 mm o Maximum total force: 7.5 tons o Pistons can be activated via a special device to reduce the pressing area • Rear vertical pressing unit: o Used to fix the last pieces and contrast the lateral horizontal pressing unit, consisting of a steel bar (2500x150 mm) o Actuated by 3 vertical pistons with a 70 mm diameter, total maximum force: 30 tons, stroke: 150 mm • Side pressing unit and rear clamping device: o Allows the production of pieces with unlimited length • Two working cycles: o Manual or automatic, selected by pressing a button o Special cycle for adjusting after pressing • Independent pressing units: o Each of the three hydraulic units has an independent pressure setting • Single hydraulic circuit: o Uses the same oil reservoir o Total power: 5 HP • Main control panel equipped with all command options (PLC included) for press operation • Press structure made of welded steel bars and profiles _____ Evacuation System: • Working dimensions: 2500x1300 mm • Mounted at the rear of the press on the mobile pressing unit • Gravity unloading system with triangular profile elements _____ INCLUDED: a. High-Frequency Generator • 20 kW high-frequency generator • Adjustable to five frequency positions, allowing the generator to be used based on the type of operation • Silicon diode bridge for constant efficiency • Fully equipped with all components for connection to the press • Press platens made of insulating materials, covered with aluminum plates to allow high-frequency transmission o Aluminum coating functions as positive and negative poles (upper and lower platen) b. Stainless steel platen coating c. Height adjustment for side steel pressing plates d. Additional thickness for the side pressing plates Dedpev Ayftsfx Addscr We offer professional dismantling, loading, installation, commissioning, and training on machine operation. We also provide ongoing maintenance services and access to spare parts.

Condition: ready for operation (used), Technical characteristics Dcsdpotgnivofx Addsr 150 bar hydraulic unit useful dimensions 2600 mm x 1000 mm 6 horizontal single-acting jacks with flat or edge locking (clamping high parts) 2 vertical hydraulic pressers high frequency unit for rapid setting of glued assemblies 3 zone hydraulic control ideal for frames, panels, furniture element frames, stairs, fixtures Power and Motors Overall dimensions Lenght: 3000 mm Width: 1800 mm Weight: 1500 Kg

Year of construction: 2015, condition: used, 2015 | Wacker Neuson IRFU57 10M High-frequency hammer 57 mm throat 10 m | Used Small Equipment ❓ Want the expert inspection report with 0 checked points, 7 extra photos and a full video? Contact us! 💡 Listed in a Bid-to-Earn auction: ✔ Earn rewards while bidding – see your reward for each bid ✔ Get your full bid amount back if outbid ✔ Rewards are credited when the reserve is met ✔ Highest bidder wins when the auction ends 💡 Why choose us? ✔ Fully inspected machines ✔ Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator ✔ Money-Back Guarantee ✔ Secure payment methods incl. pay-at-delivery option ✔ Data-driven market pricing 📍 Location: Estonia, Tallinn This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format. Djdpfx Adox Aghdedjcr

Condition: used, Year of construction: 1978, pressure 150 t stroke fix 80 mm no. of strokes 30 - 150 /min distance between columns 930 mm dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 880x1300 / 1500x600 mm hole in the table 760 x 180 mm table height over floor 1270 mm ram surface 920x1000 / 1300x600 mm Weight 27,5 t dimensions of the machine ca. 3,1 x 1,8 x 4,3 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, centralized lubrication, WITHOUT feeder as is where is, WITHOUT putting into operation Djdpfovut Urex Addjcr Price for commissioning (with new electric control) on request

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, total height: 60,000 mm, input current: 250 A, compressed air connection: 6.2 bar, input voltage: 380 V, warranty duration: 24 months, Equipment: documentation/manual, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW Dcsdpfx Adsw U Ugmeder 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Dedsxz Ugxepfx Addecr Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Dcedsf Rt Irjpfx Addjr

Condition: excellent (used), Year of construction: 1999, AIDA AXEL-300 Manufacturer : AIDA Capacity: 30ton SPM: 200~1000 Die Height: 200~1000mm Slide Adjustment: 50mm Slide Area : 550 x 320mm Bolster Area: 550 x 450mm Main Motor: 11KW Manufactured Year: 1999. 11. Dedpfx Asxuqzfeddjcr Location: South Korea Very good condition Fully working condition and operating video is available upon request available at a reasonable price Original feeder is attached and included.

Condition: like new (used), functionality: fully functional, TAWI High-Frequency Vacuum Lifter Built for speed and precision in logistics, warehouses, and packaging lines. One-handed lifting system easily handles boxes, baggage, drums, and food-grade items. High frequency manual handling device for where speed is critical. Overhead rail system 11.5 x 3m, divisible in half, the rails can also be increased in width (330kg weight). Dedpfx Aoxx Sv Sjddocr Max load of overhead rail system is 60kg. 3 lifting heads included (50kg capacity). 1. Lifting plate = 160mm diameter round. 2. Lifting plate 240 x 360mm 3. Lifting plate 300 x 100mm

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation Dcodpfjvuk E Uox Addor

Condition: used, functionality: unexamined, Year of construction: 2002, operating hours: 825 h, machine/vehicle number: E07.001.00, control type: PLC-controlled, actuation type: electric, controller manufacturer: Bachmann, stroke rate (min.): 8 1/min, stroke rate (max.): 40 1/min, power: 3.5 kW (4.76 HP), overall weight: 2,000 kg, total length: 1,000 mm, total width: 1,350 mm, total height: 2,300 mm, Equipment: CE marking, documentation/manual, type plate available, The machine is presumably fully functional. However, its last use was several years ago. A brief functionality test was successful. Pressing force: 60 kN Dedpfx Ajx Ah Irsddscr Drawing force: 40 kN Maximum filling height: 55 mm Maximum pressing stroke: 25 mm

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Dcedpfexzr Ruex Addjr Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: new, New High speed press from min. 63t up to max. 630t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Dcsdpegayiajfx Adder

Condition: excellent (used), Year of construction: 2005, operating hours: 3,328 h, functionality: fully functional, total height: 1,900 mm, total width: 1,000 mm, total length: 1,000 mm, empty load weight: 900 kg, This machine has rather few operating hours. I can also sell Orma press with this machine. Dsdpfoxfqgijx Addscr

Condition: used, total length: 1,200 mm, total width: 900 mm, total height: 2,200 mm, Empty weight: 950 kg - Documentation available: No - CE certificate present: No - Serial number: 4715 - Number of outputs [pcs]: 1 Dodswrbntopfx Addecr - Transport dimensions: 1200mm x 900mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m Dedpfjvuuf Sox Addscr ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: excellent (used), High frequency spindle Make Precise Type SC 60121 Speed 7500 - 30000 Hertz 250-1000 Volt 88-250 Dcedpfx Aju Numvsddjr 13 kw Diameter 120 mm Total length 420 mm Weight 22 kg

Condition: used, Technical details: turning speeds: 10000 U/min output: 22 kw weight approx.: 20 kg transmission ratio: 1: 4,3 Djdpfxjvb A Ubo Addjcr high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case. *

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm Djdpfx Asu Icwgoddjcr slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, - Documentation available: No - CE certificate present: No - Serial number: 50172 - Power [kW]: 5.0 Djdowh Nuyjpfx Addocr - Number of outputs [pcs]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm Dcjdpfsvuk Hrsx Adder permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t Dsdpfx Adovuubaodscr required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm Dcedpfx Adowc U Nljder no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1997, pressure 130 t Dcedpfsvuugcex Adder distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm Dsdpfxovuucwj Addecr no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F