15
Bodywork: Container transport
B28a39lj0
Empty weight: 5.250 kg
Axle 1: left 13 mm right 5 mm Axle 2: left 11 mm right 9 mm Axle 3: left 13 mm right 8 mm *** We have the possibility to stack trailers! ***
4
Balancer
Make: DALEX
Type D 3 -5
Traglast 3 -5 kg
Seilauszug 2000 mm
Eigengewicht 2,9 kg
Fh37qt2
7
Nvyztz77
5
Bench grinder, grinder, stand grinder, stand grinder
-Motor power: 0.50 kW
-Speed: 3,000 rpm
-with: stand
-Max. Grinding wheels: Ø 175 x 20 mm
-Operating voltage: 380 volts
C0ii0g0xo
-Dimensions: 500/540/H1870 mm
-Weight: 100 kg
6
12
Cc3xict8cy
6
Traces of use: Slight traces of usage
Guarantee in months: 12
Case: slight scratches, slightly soiled
Diameter Of Pitch Circle: 51,5 mm 4 x 5,5 / 10 mm
Ipb77som3
Product condition: Used from old Stock
Item No.: DG4V-3-2C-U-D-10-S300+D
WE ARE HONORABLE! WE ARE THE BEST !
Our cut-to-length line Our roll cutting lines that you need for cut-to-length sheets with a sheet width of 600 mm -2000 mm and a roll weight of 6,000 kg to 30,000 kg.
Until recently, the iron and steel enterprises were producing sheet metal, since the coil sheet opening systems were not sufficiently developed. The developments in the coil sheet opening sector in recent years have led iron and steel businesses to produce coiled sheets. As a result of these ch...
6
voltage: V/Hz
air-pressure connection: bar
control:
capacity: St./min
max. load of measurement-plate: 200 kg
total power requirement: 19,5 V / 1,5 A
weight of the machine approx.: kg
space requirements of the machine approx.: 1x Kiste links im Bild: 1,15x0,5x0,45 m
G9ak20cj
The footscan pressure measurement plate measures plantar pressure using an X-Y matrix of resistant, pressure-sensitive sensors that are scanned sequentially.
The system registers pressure data as the subject stands or walks ...
4
dimension of workpiece 400 x 200 x 200 mm
0ejehldd
voltage 0 V
WINWERTH Software Version
total power requirement kW
weight of the machine ca. 300 kg
dimensions of the machine ca. 2000x950x1900 mm
Control
1
table height: 800 mmmessurements (LxWxH): 2480 x 1230 x 800table width: 1230table length: 2480weight approx.: 650
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
5
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve
Ql2t3vvjm
-Magnetic valve
-Series: W402
-Weight: 0.9 kg
9
table diameter 560 mm
table load 0,3 t
swivelling range 0-90 Grad
table turning speeds 0,25 - 4 U/min
Torque max. 360 N/m
centre of gravity max. 150 mm
total power requirement 0,4 kW
The D-HB tilt and turn tables are very stable due to their heavy construction
and therefore particularly suitable for heavy and precise
Positioning activities and circular welding work.
Characteristics:
- Easy installation
C0pfqrp
- Increase in production is made possible
- Improvement of the welding quality thr...
6
Voltage 380 V
Frequency 50 Hz
Power 45 KW
Rated current 90 A
Hydraulics:
working pressure 70/100 bar
Cditvxrp9i
max. pressure 120 bar
pneumatics:
operating pressure 6 bar
max. pressure 10 bar
Technical documentation available
Plant not in operation
6
3-D coordinate measuring machine ZEISS NUMEREX
Granite measuring plate, granite measuring plate, measuring table
Model No. 3648-18, Serial. No. X-1019, year of construction approx. 1986
Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm
Measuring plate L x W 1525 x 1435 mm
Usable area 1525 x 1100 mm
Measuring plate thickness 305 mm
Passage width in the portal 1100 mm
Probe holder Ø 9,5 mm
Compressed air connection 6 bar
Mains connection 230 Volt, 50 Hz.
- Granite top wit...
13
Cxj3nok8
1
table height: 650 - 1050messurements (LxWxH): 2480 x 1230 x 650 bis 1050mmtable width: 1230table length: 2480weight approx.: 555This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with pro...
5
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve
Ql2qtyxnb
-Magnetic valve
-PN 3-10 bar
-Price: per piece
-Number: 6x available
-Weight: 1.1 kg
2
Available quantity: 2 pcs.
Pump speed: 3480 1/min
nominal flow rate: 3.72 m³/h
Nominal head: 49.62 m
Cbyaordqqz
No. of impellers: 5
Ambient temperature: -20 .. 55 °C
Max. Operating pressure: 16 bar
15
Das09fkre
1
table height: 650 - 1050messurements (LxWxH): 1980 x 1480 x 650 bis 1050table width: 1480table length: 1980weight approx.: 491This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with proce...
5
Three-phase motor, electric motor
-Transfer in current condition as seen
-Foot damaged, see photo
-Power: 3 kW
-Speed: 1440 rpm
-Shaft: Ø 22 mm
-Construction: B3
-Protection class: IP 33
-Price: per piece
Xuczw72uj
-Number: 1x available
-Dimensions: 530/330/H260 mm
-Weight: 51 kg
1
table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 481
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
4
Electric motor, three-phase motor
Yrq0ythfh
-Replacement motor: for pressure blower
-Power: 3.0 kW
-Speed: 2800 rpm
-Shaft: Ø 19 mm
-Construction: B5
-Protection class: -
-Dimensions: 390/320/H320 mm
-Weight: 24 kg
1
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 285
Bixt9d7hps
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and t...
1
table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
1
table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950 mmtable length: 1950weight approx.: 358This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with proc...
1
table height: 800messurements (LxWxH): 1400 x 900 x 800table width: 900table length: 1400weight approx.: 235
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
1
table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 308This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 288
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
1
table height: 650 - 1050messurements (LxWxH): 1480 x 1480 x 650 bis 1050table width: 1480table length: 1480weight approx.: 464This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with proce...
1
table height: 800 mmmessurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 332
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
1
table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 365This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 650 - 1050messurements (LxWxH): 1400 x 900 x 650 bis 1050table width: 900table length: 1400weight approx.: 305This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 850
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
1
table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 425This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 375
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
1
table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 428This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with process...
1
table height: 800messurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 630This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, ...
1
table height: 800 mmmessurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 355
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enab...