Used 3 Axis Lathe for sale (70,349)

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table Bolsz Hc T Ujhcdwvowu 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm Bwjlhjzkbirocdwveu X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Bwslheu A Dnpjcdwveu Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Machine weight 4800kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3087984, SPECIFICATION Swing over front apron 806mm Swing over cross slide 527mm Maximum cutting diameter 533mm Maximum turning length 660mm Spindle nose A2-6 Spindle bore 88.9mm Bar capacity 76mm Maximum spindle speed 3400rpm Spindle motor power 22kW Number of turret tool stations 12 Rapid traverse Z/X axis 24m/min Approximate weight 6500Kg MACHINE EQUIPPED WITH: - Haas CNC control system Live tooling with C axis Collet chuck Tool setting probe Parts catcher Hydraulic tailstock Bwolhcdwezwuraovju Servo bar 300 magazine bar feed Swarf conveyor Interlocked guarding Automatic lubrication system Coolant system Manual

Condition: excellent (used), functionality: fully functional, load capacity: 3,500 kg, 3-axis ESAB welding positioner, 3500 kg load capacity Belhcdezk Rbdjwvewu in very good condition complete with accessories, including foot and hand-held remote control Clamping plate diameter 1100 mm

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Bwelhox Af I Aecdwvsu Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Configuration: 3-axis main spindle HSD Bslhcdwez Ii Axovowu 1 grooving saw X-direction Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Bslhcdey Ni Ivewvswu Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Demmeler Ergonomix M-2000 with original set of 2 perforated plates, 2.4 m x 1.2 m, plus octagonal 3D table top, 1.1 m, with 28 mm holes Plasma nitrided Bwslhcdwez Hvy Uovou Almost unused, like new, in top condition Complete with accessories and technical documentation Thanks to the sophisticated arrangement of the entire mechanism, Demmeler’s developers have succeeded in creating an unbeatable large working area while maintaining a small footprint for the Demmeler Ergonomix® M manipulator. The manipulator always positions the heaviest loads in the ideal location. A special feature of the Demmeler Ergonomix® M product family is the large swivel range up to 180°. This provides a decisive advantage for many workpieces, allowing them to be completely machined in a single setup without additional rotation. Load capacity 2000 Model M2000 A = min 490 B = max 970 C = max 1480 D = max 1000 Torque 1250 Tilt angle 180° Tilt moment 8000

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: Bwjlhcdozuxn Tswvou 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,200 mm, total width: 1,900 mm, total length: 1,800 mm, table width: 650 mm, table length: 850 mm, Sinker EDM machine with a C-axis. Belhozqd Rrscdwvowu

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Bolozav D Dohcdwvowu Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2004, Machine is good working condition. Control unit Heidenhain TNC 530 Bwolhcdeyufn Ijwvju Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant Bweljx D Uf Tohcdwvsu For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Beljq Atxyohcdwvjwu Coolant system Lighting Interlocked guarding  

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Bwjlhcezu Nggsdwvou Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: XD-16III-CP-0073-H, spindle bore: 18 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 1,500 rpm, type of input current: three-phase, overall weight: 2,200 kg, rotational speed (min.): 10 rpm, Equipment: documentation/manual, Hanwha XD16 III Few operating hours Barloader BMG-20 Chip conveyor with trolley and collector Bslhcdwezxhwrovowu Fanuc control Bar diameter modified to Ø18mm

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Belhjzxrkiocdwvswu Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: excellent (used), Tuscan LC38 x 3000mm CNC Lathe Swing Over Bed 970mm Swing Over Cross Slide 420mm Centre Height 490mm Distance Between Centres 3000mm 12 Station Duplimatic Turret Tailstock Boring Bat Attachment Boring Bar 2 x 3 Point Fixed Steady 1 x Travelling Steady Fanuc OiTC Control C Axis & Driven Tools Belhcdwevtw Imovjwu Serial Number LC223806086 Year 2010 /10

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle bore: 162 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 4,200 mm, total height: 2,900 mm, total length: 8,200 mm, total width: 3,200 mm, workpiece weight (max.): 2,500 kg, overall weight: 24,000 kg, distance table center to spindle nose: 4,200 mm, CNC Lathe with c-axis GEMINIS - GHT-4 MACH-ID 9802 Make: GEMINIS Type: GHT-4 Control: FAGOR 8065T Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Bwjlhcdszx Swcowveu Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Control: FAGOR 8055 Chip conveyor: Yes Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, load capacity: 1,250 kg, 3-axis welding positioner, height-adjustable 1250 kg load capacity Very good condition Includes accessories: hand-held and foot-operated remote control See video. Bwjlhjzk Rbqscdwvsu

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks Belhcdwoyaywhovewu TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, turning length: 1,609 mm, spindle bore: 110 mm, travel distance X-axis: 335 mm, travel distance Z-axis: 1,609 mm, spindle motor power: 26,000 W, rotational speed (max.): 2,100 rpm, total height: 2,100 mm, total length: 3,800 mm, total width: 2,100 mm, CNC Lathe with c-axis VIPER - VT-33LMBC MACH-ID 9473 Make: VIPER Type: VT-33LMBC Control: Fanuc 21iTB Year: 2008 Tooling holders included Live driven Axiaal tools included  Live driven Radial tools included Chip conveyor Tool eye arm Motorized Tailstock 3 chuck 400 mm with extra2008 jaws Max. turning Ø: 780mm X-Axis: 335mm Z-Axis: 1609mm Spindle bore: 110mm Speedrange: 2100Rpm Spindle power: 26kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:4.5kW Chip conveyor: yes Tool eye: yes Pinole taper: 5Mk Stroke pinole: 110mm Quill Ø: 100mm Length: 3800mm Width: 2100mm Height: 2100mm Weight: 8200kg Belhcjyw Ii Uedwvswu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore Bwslhoztctqjcdwvju MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- Bwslhcjy Uwxtsdwvju – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery 12 months guarantee