Used Abort Gate for sale (598)

Condition: new, VARIOUS GATE VALVES A LOT OF VARIETY Fjdsurk T Nspfx Ap Djpn BRAND NEW

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper Fsdpfszlbqrex Ap Djpn - Galvanized base frame for container l...

Condition: used, empty load weight: 6,300 kg, overall weight: 33,500 kg, axle configuration: 3 axles, first registration: 06/2001, loading space volume: 53 m³, suspension: air, tire size: 385/65 R22.5, tire condition: 80 %, trailer brake: trailer braked, Year of construction: 2001, Equipment: ABS, SCHWARZMÜLLER – approx. 53 m³ – Full Aluminum - Volume: approx. 53 m³ - Portal doors and grain discharge gates - Aluminum chassis - Aluminum body - ABS - SAF axles - Lift axle - Drum brakes - Air suspension - Roller cover - Standing platform at the front wall - Aluminum rims - Toolbox - Spare wheel holder - Spare wheel Fpjdpfx Aoztl Spep Den - Tire size: 385/65 R22.5 Tire tread: approx. 70-90% - etc. ….. For more information: Mobile phone: +43 664 4477030 ..:: Please contact us before your visit; the office is not always staffed ::.. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will handle all customs matters for you. What to do with the used vehicle? ...If we reach an agreement, we will gladly take it in part exchange. This offer is non-binding and subject to change. Errors and prior sale excepted.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable Fpsdpszlbpbefx Ap Den - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: new, functionality: fully functional, New, fully functional Leybold/VAT Leycon HV gate valve with bellows 6528450 for sale from old stock, with a 6-month warranty. Fpedpfxsyrr Sho Ap Djn Worldwide shipping available – request a quote! If you are looking for a vacuum pump, accessories, or any vacuum technology-related equipment, please contact us. We are happy to assist you with purchasing, technical advice, or developing custom solutions.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 120 t, ram plate length: 4,300 mm, Equipment: CE marking, SAFAN 120-ton, 4300mm CNC Edge Press/Folding Machine Used bending machine / press / edge press Brand: SAFAN Model: [Model number missing in the original text] Year: 2002 Press force: 120 tons Bending length: 4300mm CNC control with touchscreen Front supports Operating manual Electrical and hydraulic diagrams Rear safety gate Side safety gates Fpodpfoz It Sqex Ap Don

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units Fpodpsy Nkhdofx Ap Dsn 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: excellent (used), Year of construction: 2005, 092 USED Miwe Thermo-Express thermo-oil deck ovens + Athlet loading system. EQUIPMENT: - 3 Miwe 6.1820 deck ovens (chamber dimensions 180x200 cm, total baking area: 66 m²) - Miwe Athlet loading and unloading system - manual loaders with trolleys (approx. 10 trolleys) - heating boiler 412 kW - post-baking steaming - bread collection conveyor belt, approx. 11 m - bread discharge onto the table EXTERNAL DIMENSIONS OF THE ENTIRE SET (in cm): - width: 820 cm - depth: 800 cm Fodpfxozx Hfuj Ap Depn - depth to the gate: 1000 - height 350 - conveyor belt length after baking: approx. 1100 + bread discharge Year of production: 2005 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2021, Ref:11155 . 2021 Horizon Stitchliner Mark III Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 30 station (1 x VAC 1000Ha + 2 x VAC 1000Hm) 10 station tower suction collators with touch-screen control, double- and miss-sheet control. Fpsdpfx Apsz Hz Evs Dsn ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt. Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Year of construction: 2004, condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve, double three-way shut-off valve Fjdpfxoiqu R Ij Ap Djpn -Manufacturer: Wehlan, Double three-way shut-off valve -Type: 33 R 010 A 02 Order No.: 13992 -Connection: DN32 PN16 -Hole spacing: 350 mm -Number: 12x valves available -Price: per piece -Overall dimensions: 490/140/H370 mm -Weight: 14.3 kg/pc.

Condition: used, Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 Fpedpeppdh Defx Ap Dsn -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) Fpsdpfx Apozzz Naj Den - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, heavy-duty gate tension car, manufactured by Linck, type Va, with auxiliary car Vy. Fpodpfx Ajc Ulvbop Don

Condition: used, EFCO Glass Tempering System 750 °C Thermal glass tempering system for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering system from the renowned British manufacturer EFCO Furnaces Ltd. The system is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System Components & Structure Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the enclosed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air (“quenched”) to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main control cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Fjdez Hm Ipspfx Ap Dopn Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer (Glass Tempering System) Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Connection voltage: 380 volts Number of phases: 3 phases Mains frequency: 50 Hz Reference number: 427206 Year of manufacture: 2001 Conformity marking: CE certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m Complete set of spare ceramic rollers: A full, unused/new set of high-quality transport rollers (Fused Silica Rollers) with a new value of over €10,000 for the oven area. Item location: 32278 Kirchlengern Dismantling until the end of October Dismantling & transport: Option 1: The dismantling, loading, and transport will be completely organized and carried out by the buyer (collection from the location). Option 2: Dismantling service by us: Alternatively, we offer to have our team professionally dismantle the complete system. Surcharge: €5,000 net "All from one source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2012, machine/vehicle number: A092895, Marel OptiWeigher + 20-Gate Fish Grader with 6 Printers Grader type: dis-ma45-b600-dual Complete used Marel weighing, grading and packing system for fish processing. The system includes a Marel OptiWeigher dynamic weighing module and a dual-sided Marel grader with 20 grading outlets. Configuration: - Marel OptiWeigher - 20 grading gates - 10 gates on the left - 10 gates on the right - gate spacing: 675 mm - 6 label printers - 3 printers on each side Fsdpfez Hc Aijx Ap Dspn - packing shelves - roller conveyors - packing buffers - stainless-steel food-processing construction - Intralox Series 1650 polypropylene belt - approx. grader length: 9,050 mm - electrical supply: 3 × 400 V + N - grader motor: 0.75 kW The product is dynamically weighed by the OptiWeigher and can then be automatically distributed to the selected grading outlet according to the programmed weight class. The machine was used for fish processing and is suitable for applications such as: - fish grading, - salmon processing, - batching, - weight classification, - direct packing at grading stations. It may also be adapted for poultry or other food products, depending on product size and process requirements. The six printer positions allow direct labeling at packing stations. Possible packing formats include: - cartons, - EPS / polystyrene boxes, - plastic crates, - tubs. The system may be integrated into a Marel Innova environment, subject to verification of the installed control and software configuration. Technical documentation available. Inspection possible by appointment. Price: on request.

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Fsdpfez Az Iajx Ap Djpn Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm Fpsdpfxez Ikq Do Ap Don - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), mileage: 7,76,570 km, power: 324 kW (440.52 HP), first registration: 04/2009, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro4, suspension: steel-air, total length: 11,000 mm, total width: 2,550 mm, total height: 3,550 mm, loading space length: 8,430 mm, loading space width: 2,490 mm, loading space height: 2,190 mm, Year of construction: 2009, Equipment: ABS, air conditioning, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, tail-lift, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - High roof - Tail lift - Manual - Auxiliary drive - Pump - Radio/cassette - Fabric = Notes = Fpedpfx Ajzvbahop Djn Number of axles: 3, Configuration: 6x2, Tare weight: 13620 kg, Gross weight: 28000 kg, Total tank capacity: 1200 liters, 2nd diesel tank, Height of fifth wheel coupling: 8 cm, Fifth wheel coupling: Fixed, Winch pulling capacity: 355 tons, Suspension type: Air suspension, Cab type: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Multicolored, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Engine power: 324 kW (434 hp), Fuel: Diesel, Euro: 4, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 16, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Pump, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear gate, Load capacity of tail lift: 1500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Aluminum, Tail lift size: 161 x 253 = Further Information = Transmission Transmission: ZF, 16 gears, Automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 5 mm; Tire tread depth right: 4 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inside: 9 mm; Tire tread depth left outside: 8 mm; Tire tread depth right inside: 10 mm; Tire tread depth right outside: 9 mm; Suspension: Air suspension Axle 3: Lift axle; Steered; Tire tread depth left: 5 mm; Tire tread depth right: 6 mm; Suspension: Air suspension Weights Unladen weight: 13,620 kg Payload: 14,380 kg GVW: 28,000 kg Functional Tail lift: Dhollandia, Rear gate, 1500 kg Height of loading platform: 132 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, covering various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: used, maximum load weight: 29,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2008, next inspection (TÜV): 04/2026, loading space length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion, subject to errors, typos, and prior sale: Langendorf internal loader for glass, electrically powered (Vehicle 103) First registration: June 24, 2008 Type SGL 5 Permissible gross vehicle weight 39,000 kg Unladen weight 9,500 kg Payload 29,500 kg Overall length 13,600 mm Overall width 9,500 mm Overall height 4,000 mm 9 m internal length Next inspection: 10/2026 Confirmation of NATO socket, not via hydraulics Storage compartments on the side Air suspension With emergency running system for foldable wheel suspensions BPW turntable Tires 385/65R22.5, front: approx. 60/60%, 2nd: approx. 70/70%, 3rd: approx. 80/80% Axle load per 9,000 kg WABCO ABS Fixed front wall Curtain closure on the driver's side + passenger side at the front Fixed gate at the rear 2 x drop-down supports Hydraulic supports inside Fpodpsz A I Rwofx Ap Den Hydro Push system Ferry lashing: 1 x each on the front left and right of the frame + 1 x each on the left and right at the rear bottom Fixed gate at the rear Various storage options on the side Price: €13,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties up to a dispute value of €5,000.00 is the district court of Ludwigslust; for dispute values exceeding this, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, mileage: 2,50,000 km, power: 162 kW (220.26 HP), first registration: 11/2010, overall weight: 11,990 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, loading space width: 2,500 mm, loading space length: 4,000 mm, Year of construction: 2010, total length: 6,950 mm, total width: 2,550 mm, total height: 3,400 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, crane, soot filter, tail-lift, Buy online. Finance digitally. Have it delivered nationwide. Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. ---- Internal ID number: [ 3439 ] Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options available even without a down payment * Trade-in of your vehicle, whether old or new Optionally bookable: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (technical inspection and emissions test) * Nationwide delivery ---- Vehicle highlights: 19% VAT can be shown separately German vehicle Accident-free 1st owner Euro 5 standard MAN TGL 12.250 tipper with HIAB 077 BS-2 DUO loading crane + grapple Outriggers 3-way tipper (with FOERSERMANN system body) Bordmatic/hydraulic drop-side gate Automatic transmission Air conditioning Differential lock Permissible total weight 21,000 kg Gross vehicle weight 11,990 kg ---- Do you want to lease or finance? We offer attractive deals – even without a down payment! Please do not hesitate to contact us. Contact: Mobile: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Fpodpfxoziudas Ap Djn Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are subject to change. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: excellent (used), functionality: fully functional, HYGIENE STATION | Walk-through hygiene gate with shoe cleaning, hand disinfection, and a double turnstile Fpsdez Ek T Hspfx Ap Den Type: Walk-through hygiene station (two-way) Length of rotating brushes: 2 x 1700 mm Overall dimensions: 2900 x 1000 x 1550 mm Industrial, walk-through hygiene station (hygiene gate) designed to enforce strict hygiene procedures for personnel entering and exiting the production area. The device integrates automatic cleaning and washing of work shoe soles using rotating brushes and a contactless hand disinfection module in a single passage. An integrated double turnstile releases the passage lock only after the complete disinfection cycle, completely eliminating the risk of human error or omission of the procedure. The machine is indispensable in all food processing plants with high sanitary requirements – in meat processing plants, butcher shops, slaughterhouses, poultry plants, fish processing plants, bakeries, freezers, and delicatessen and catering facilities. The use of two longer cleaning brushes (2 x 1700 mm) ensures thorough cleaning of shoes during passage without the need to stop for an extended period, which guarantees smooth employee flow during shift changes.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser type: CO₂ laser, laser power: 5,000 W, Equipment: cooling unit, nozzle changer, - Laser power: 5000 watts. - Year of manufacture: 2010 - Thin sheet productivity package - Nozzle changer - Transverse conveyor - Tilting container for transverse conveyor Fjdpfozq S Edex Ap Djpn - LiftMaster Store - Extended sorting system (1000 x 600) - Extended part removal for parts from 600 x 600 - Integrated sheet alignment - Single-sheet separation - Sliding gate, two-leaf - SortMaster - Rotating unit + extended part removal 1000 x 600, infinitely adjustable - Additional gripper for long parts - Extended magnetic suction system - TruStore 1030 - Infeed/outfeed station with trolley - 10-level compartment, 90 mm + pallet - 5 pallet bases - Column cladding - Storage interface

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 361 h, axle configuration: 4x4, fuel type: diesel, power take-off speed (max.): 540 rpm, maximum speed: 25 km/h, color: green, number of seats: 1, number of cylinders: 3, displacement volume: 1,115 cm³, motor manufacturer: YANMAR, gearing type: hydrostat, number of gears: 2, Equipment: additional headlights, cabin, lighting, rear power take-off, trailer coupling, MGC.pl has been operating in the vehicle and machinery market since 1995. Over more than 30 years, we have completed over 6,000 transactions. Our offer includes a 2015 John Deere 1026R, sold as a set with a snowplow and a salt spreader. This is a compact set for winter maintenance of parking lots, squares, internal roads, and company premises. The tractor's small width makes it easy to maneuver around buildings, gates, and in tight spaces. The plow removes snow, and the salt spreader distributes salt on the surface. The tractor is equipped with a three-cylinder Yanmar diesel engine with a displacement of 1115 cm³ and a power of 24.8 HP. 4x4 drive, power steering, and a two-range hydrostatic transmission facilitate work that requires frequent changes in the direction of travel. The model also has a rear PTO and a three-point linkage. Technical data of John Deere 1026R: year: 2015; engine: Yanmar, 3 cylinders, Diesel; displacement: 1115 cm³; power: 24.8 HP; drive: 4x4; transmission: hydrostatic, 2 ranges; tractor width: 1202 mm; length with rear three-point linkage: 2605 mm; Fedpfx Asz E I S Tsp Dopn tractor weight without attachments: 655 kg; rear PTO: 540 rpm; fuel tank capacity: 21.2 l. The price of the set includes: tractor, plow, and salt spreader. The dimensions and weight provided refer to the tractor itself, without the mounted attachments. This machine can be useful for a company involved in winter maintenance, a municipal facility, a farm, or in the management of a larger property. We invite you to contact us and view the machine. MGC.pl – experience in selling vehicles and machinery since 1995. The stated price is the net price and applies to export and for companies. A significant discount is possible for individual customers - Please contact us directly by phone to get your best price.

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 120 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit Fpjdpfx Apjzxy Szs Djn • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 120 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: used, functionality: fully functional, mileage: 46,100 km, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: white, driver cabin: day cab, emission class: euro4, Year of construction: 2006, Equipment: air conditioning, crane, IVECO TRAKKER 450 8x2 – Year 2006 DIESEL / Euro 4 Mileage: 46,100 km Manual transmission / Engine displacement: 12,882 cc / Power: 332 kW GVW: 320 quintals Payload: 10,850 kg / Wheelbase: 5,100 mm Accessories: - Auxiliary engine - 4th steerable lift axle - Front hydraulic gate Fsdpsztdr Iefx Ap Depn - Air conditioning Equipment: - Fixed body: 6,570 x 2,550 x 1,230 mm (H) - COPMA 500.6 crane + J4 antenna - Antenna - Winch - Radio