Used Abrasive Drum for sale (3,564)

Condition: new, functionality: fully functional, Year of construction: 2026, * New machine * Air conditioning * Traction control / Ec * Seismic * Kubota V 3307 CR-TE5 engine (55 kW - 75 hp) * Static line load 20 kg/cm² * Two travel speeds Lrodpfx Akoyuvxwjmsu * Immediately available * Operating weight 6,650 kg (max. weight 7,700 kg) * Drum width 1,676 mm * Immediately available

Condition: used, Year of construction: 2008, machine/vehicle number: 147233, Ref. no. 20312 Technical Data: - Workpiece thickness: 0.8 to 51 mm - Max. working width: 1370 mm - Max. grinding height: 100 mm - Grinding diameter: 150 mm - Grinding speed: 1720 rpm - Feed rate: 3.7 m/min - Drive: 400 V / 9.7 kW - Working height: 1100 mm - Space requirement approx.: W 1700 x H 1200 x D 1200 mm - Weight approx.: 800 kg Ledsylylispfx Akmoru - Separate mobile motorised grinding dust extraction unit

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 Lrsdpfxew Ivk To Akmju 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: used, mileage: 5,20,000 km, power: 355 kW (482.67 HP), first registration: 09/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: beige, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF 480 FT 4x2 tractor unit with Grandner Denver Drum D9000 silo compressor, Euro 6, retarder, Super Space Cap cab with two sleeping berths, roof side spoiler, automatic transmission, power take-off, leaf air suspension, ACC adaptive cruise control, LDWS lane departure warning, collision warning, TPMS tire sensors, auxiliary air conditioning, auxiliary heating: seat ventilation/seat heating, xenon headlights, radio/AUX, single-door hatchback First owner Test book Multiple copies available Lsdpexb Invofx Akmeru 6 copies available

Condition: new, Year of construction: 2026, Short Description: Volvo EC350 Rock Bucket with 1.90 m³ capacity, designed for quarry, mining, rock excavation and heavy-duty applications. Reinforced structure for long service life and high performance. Full Description: Galen Volvo EC350 Rock Bucket is designed for demanding excavation, quarry and mining applications. Its reinforced body structure provides high durability, reliable performance and long service life in abrasive and heavy-duty working conditions. This bucket is suitable for Volvo EC350 excavators and offers efficient loading and digging performance in rock, stone, quarry and construction site applications. Technical Information: Machine model: Volvo EC350 Bucket type: Rock Bucket Capacity: 1.90 m³ Edge length: 1650 mm Application: Quarry, mining, rock excavation, heavy-duty construction Lredpfx Akszivlljmju Galen Group manufactures high-quality excavator and loader attachments with over 20 years of experience. Custom bucket production is available according to machine model, material type and working conditions. Please contact us for price, delivery time and technical details.

Condition: new, machine/vehicle number: Elek Kova, Attachment suited for: Construction machines Selling price: € 24.500, US$ 25.960 Lrsdpfxjph Rm Sj Akmsu With proper blade choice and spacing it easily grinds • Grass lumps • Roots • Wood sticks • Glass • Tiles • Asphalt (with certain limitations) *The screener crusher is not suitable for crushing concrete or hard stones. Advantages: - Clog free structure that ensures good capacity, even with wet materials - Top screen combs carry most the material weight, this way the drums and bearings have less impact and load - Changeable wearing parts (screening blades and top screen combs) lower the operating costs - Simple structure (easy maintenance) - The top screen structure works smoothly, even with wet materials. Screening buckets produced by Galen are therefore an excellent choice for screening topsoil, compost and peat and the perfect tool for landscaping. 1.Innovative frame design • Straight outer sides • Low fastering points for wheel loaders 2. Long lifetime of blades and blade holders • New design ensures low wear factor • Spring pin fixing allows easy change of blades • Design of the blade protects the blade holder 3. Modular counter blade construction • Same counter blade elements used on all models • Counter blade also below the lower drum 4. Centralized lubrication points of the bearings • Easy access points in the frame make the greasing easy. • Speeds up with the daily service and maintenance. 5. No need for drain oil line • Lower installation costs • Easy to use on different base machines For 8 - 40 tons EXCAVATORS For 5 - 26 tons WHEEL LOADERS Prices are representative. Please contact us. For detailed information please visit screenbucket.net

Condition: used, Year of construction: 1984, Technical details: drum revolutions: 16 rpm U/min speed down: min./max.: 0,23 / 0,34 m/sec. operating pressure: 85,3 Psi - ca. 6 bar bar traction force - max.: 15 Lodpfeu Nv Ubox Akmeru traction force: min: 10 kN weight: 389 kg dimensions L x W x H: 1,1x0,9x0,75 m - pneumatic rope winch - stable steel construction - floor plates size: 700x340mm - display via manometer - pressure connection via 1 inch thread - drum brake - dimension of the rope drum: Ø 400 x Ø 250 x 230mm - without rope!!!! *

Condition: used, Year of construction: 2006, Technical details: voltage: 380 V number of stations: 1 Stück Lodpfxsu Nu Imo Akmjru total power requirement: ca. 2,0 kW weight of the machine approx.: 160 kg dimensions of machine: 0,85x0,85x1,0 m Vibratiory bowl feeder Washing unit (vibration technique) with heating: - applicable for cleaning of small parts - drum size 300mm, height 150mm - ejection automatically via screw guide - tank:560x460x280mm, filling approx. 60 liter, with filling display - equipped with rotary waste separator - table: 800x600mm, table height 640mm, catching basin 750x550mm *

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Lsdod E Ixzspfx Akmsru • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, empty load weight: 8,921 kg, maximum load weight: 27,079 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2020, next inspection (TÜV): 04/2027, total length: 2,600 mm, total width: 4,000 mm, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Krone TK SLXi 400 refrigerated semi-trailer | SAF axles with drum brakes | 2 spare wheel holders, 1 with spare wheel | Thermo King SLXi 400 refrigeration unit | 5 cm wall thickness | Tires: 385/65 R22.5 | Double-deck without beams | Subject to errors, typos, and prior sale. Lredpfozmxpuox Akmju

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm Lsdpfx Ajz Sq Apjkmeru • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW Lrsdpoudxchefx Akmeu 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding Lredpfjxqggcsx Akmsu SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,480 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 445/45 R19.5, tire condition: 30 %, wheelbase: 8,790 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - Drum brakes = More information = General information Year of construction: 2016 Ledpfx Aszvdn Iokmeru Registration number: OP-46-BV Axle configuration Tyre size: 445/45 R19.5 Make axles: BPW Tyre profile: 30% Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 7.010 kg Carrying capacity: 31.990 kg GVW: 39.000 kg

Condition: used, mileage: 800 km, power: 330 kW (448.67 HP), first registration: 07/2026, empty load weight: 14,220 kg, maximum load weight: 21,705 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 07/2027, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, front tire size: 385/65 R22.5, rear tire size: 315/80 R22.5, Equipment: ABS, air conditioning, central locking, cruise control, truck registration, Mercedes-Benz Arocs 3745 8×4 – IMER concrete mixer 10 m³ * Mercedes-Benz Arocs, Model Generation 5 * Axle configuration 8×4/4 * Engine OM 471, 6-cylinder inline engine, 12.8-liter displacement * Power: 330 kW / 449 hp, Torque: 2,200 Nm * Emission standard Euro VI E * Automated 12-speed transmission with Mercedes PowerShift Advanced * Driving program: "Offroad" * High Performance Engine Brake * Leaf spring suspension on front and rear axles * M-cab ClassicSpace, 2.30 m wide * Air conditioning and comfort driver’s suspension seat * Multimedia cockpit Interactive 2 * Reversing camera and acoustic reversing warning * Cruise control and traffic sign assistant * Active Brake Assist 6 * Turning assistant Active Sideguard Assist 2 * Frontguard Assist, lane keeping assist, and attention assist * Tire pressure monitoring system * 320-liter aluminum tank and 25-liter AdBlue tank * LED fog lights and two LED rotating beacons * Paint finish: Arctic White * Year of manufacture, vehicle and body: 2025 * 6-cylinder diesel engine Mercedes-Benz OM 471 * Two steered front axles * Rear axles with twin tires * Permissible total weight: 36,000 kg * Technical total weight: 37,000 kg * Unladen weight according to approval: 14,880 kg Lrodpfx Ae Advxxokmeu * Permissible payload according to approval: 21,045 kg * Vehicle dimensions: 9,160 × 2,550 × 4,000 mm * Front tires: 385/65 R 22.5 * Rear tires: 315/80 R 22.5 Concrete mixer body * Manufacturer: IMER * Type: LT 10.7 H * Drum volume according to data sheet: 10 m³ * Year of manufacture: 2025 * Body built by MF-CT d.o.o. * Rear underrun protection device according to ECE R58.03 * Austrian individual type approval available. Subject to errors, input errors and prior sale.

Condition: used, empty load weight: 4,140 kg, maximum load weight: 19,860 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 06/2027, loading space length: 5,800 mm, total length: 2,550 mm, total width: 4,000 mm, total height: 7,200 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 3,850 mm, Equipment: ABS, compressed air brake, | Gsodam 3-axle timber trailer | Year of manufacture: 2012 | 2-axle, liftable | 4 pairs of stakes | Loading platform length: approx. 5.80 m | Tare weight: 4,140 kg | Payload: 19,860 kg | Gross vehicle weight: 24,000 kg | BPW axle with drum brakes | Austrian vehicle | Errors, typos and prior sale excepted. Lrodpfxo Ab Tivs Akmju

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac Lodpfx Akoz Sm Amomoru • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation • Removal of adhesives and resins • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). Lrsdpfxjz Slx Te Akmju A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Drum diameter: approx. 1,600 mm MACHINE DETAILS Manufacturer: HMS Machine type: Drum winder Year of manufacture: n/a Dimensions, length: 6,000 mm Dimensions, width: 2,400 mm Dimensions, height: 2,800 mm Lodpfxo Advd Is Akmjru Weight: 5,000 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional Lrjdpfexgumcjx Akmeu – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: good (used), Year of construction: 2017, functionality: fully functional, total width: 850 mm, total length: 1,320 mm, total height: 2,165 mm, For hazardous waste press into drum Ljdpfsz Tg Drox Akmsru

Condition: excellent (used), Catalog number 7640 ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA - Max. sanding width 610mm - Max. sanding height 200mm - Top: - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip Lsdpozx Suusfx Akmjru - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, The Volpato LS 1N is a universal machine designed for sanding edges, profiles, and shaped components made of wood as well as other materials. It combines user-friendly operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. The robust construction and high-quality Italian workmanship ensure long service life and reliable performance even under demanding conditions. The machine features chain feed with stepless speed control from 4 to 20 m/min, pneumatic belt tensioning, and an oscillation system for even abrasive utilization. Precise adjustment of the pressure shoe allows for both fine contour sanding and precise calibration. Technical Data Sanding Belt Belt size: 2450 × 80 mm Unit tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding Disc Max. diameter: 220 mm Max. width: 90 mm Unit tilt: 0–180° Rotational speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Net weight: approx. 90 kg Milling Unit (optional) Cutter diameter: 140–160 mm Unit tilt: 0–90° Rotational speed: 0–6000 rpm (with inverter) Motor: 4 kW Spindle diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Lodpfxoxlquts Akmeru Feed System Type: Chain drive with rubber inserts Feed speed: 4–20 m/min (infinitely variable) Dimensions and Weight (LS 1N model) Length: 2450 mm Height: 1400 mm Depth: 1900 mm

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2005, loading space length: 13,570 mm, loading space width: 2,520 mm, loading space height: 2,670 mm, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 20 %, wheelbase: 9,110 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - Drum brakes = More information = Ledpfx Ao Adtk Eskmsru General information Year of construction: 2005 Registration number: OH-82-ZN Axle configuration Tyre size: 385/65 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.760 kg Carrying capacity: 33.240 kg GVW: 41.000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Screen Conveyor BELT CONVEYOR – 600mm/800mm/1000mm/1200mm/ WIDTH with ANY LENGTH 600 mm - 800 MM - 1000MM -1200MM CONVEYORS FROM FABO COMPANY • High quality Polat brand reductor • Drive drums are rubber coated and threaded. Lrsdpo Ad Itbsfx Akmou • Belts are EP 125, 4 layers’ double stick 10mm thickness • Conveyor belt system was protected with emergency stop • All motors are GAMAK or equivalent brand • A side scraper system is available to prevent spillage of the final product into the stock area during crushing • The gear units are 3 transmission type and the new generation is with torque connection system • Long life rollers FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!