Used Drum Chipper for sale (2,894)

Condition: good (used), Year of construction: 2000, functionality: fully functional, Sawmill Line Equipment for Sale We are offering for sale part of a sawmill production line (the EWD band saw has already been sold). The following equipment is available: - Complete conveyor systems - Esterer edging saw (year of manufacture: 2000) - Multi-rip saw (250 kW German motor, year of manufacture: 1992) Pgodsyyv Udjpfx Akfok - SDOP 600/3 drum chipper (year of manufacture: 2010) - Full conveyor system for sorting sawdust and offcuts into the chipper The line has been in operation until 02/2026 and is fully functional. ✔ Available as a complete set or as individual machines. For more information, please contact us via email or WhatsApp.

Condition: excellent (used), Catalogue number: 7924 TECHNICAL DATA hopper top opening (L/W): 500x600 mm hopper length: 2070 mm shaft width: 550 mm Pgedpsyug Ddefx Akfek motor: 55 kW number of knives: 4 pcs outlet for shredded wood: rectangular 560/360 mm dimensions (L/W/H): 3950x1520x2820 mm weight approx.: 2500 kg – drum chipper – 4 knives on the shaft – additional built-in fan for chip discharge – condition: very good – used chipper Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), functionality: fully functional, DRUM CHIPPER BRUKS 602 CS opening size: 540 x 300 mm Drum diameter 600 mm Motor 26 kwh Capacity 20 m3 of chips/hour. Good condition Pedpfoywgfuox Akfogk

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included Pgodpfou Rl Ruex Akfek

Year of construction: 2023, condition: as good as new (ex-display), Technical data: Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Podpencd Duofx Akfegk Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR.

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Psdpfxoncd Azs Akfjgk Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TH 600 / 1050 / 11, overall weight: 35,000 kg, type of input current: three-phase, total height: 2,310 mm, total length: 4,400 mm, total width: 2,906 mm, input voltage: 380 V, feed length X-axis: 1,054 mm, feed length Z-axis: 651 mm, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 600mm Chipping Width : 1050mm Rotor - Diameter : 1600mm Number of Knives : 3 chipping knives and 1 counter-knife Psdpfxew S In Ee Akfogk Infeed Capacity : Approx 50-150 rm/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 400kW Voltage : 380-400V Geared Motors : 2 x 15kW Sew Eurodrive Infeed Rollers : 11 Pcs Feeding : Horizontal Drive : By Belt GT54 x 2

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Pgjdpfxow U A Skj Akfok Voltage : 380-400V Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt

Condition: used, Drum chipper Manufacturer: Sjolin Model: 150M Electric motor: 37 kW Capacity: 7-19 m3/h Knive dimensions: 350X110X10 Knive amount: 4 Pgodpsx N S A Aefx Akfjk

Condition: used, Drum wood chipper IDC000024 - Manufacturer: Erjo, - Model: 204 MA, - Capacity: 20 - 40 m3/val., Pgsdpfxetqz Sbe Akfsk - Weight: 3000 kg, - Electric motor: 30 kW.

Condition: refurbished (used), Year of construction: 1991, HAAS drum chipper type HTH-160x510 L2WV completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested rotor New knives and counter knives Feed width/height: 510 x 160 mm Rotor diameter: 500 mm Screen perforation: 60 x 60 mm Drive power: 45.0 kW Feed motors: 2 x 2.2 kW Weight: approx. 3,000 kg Machine colour: RAL 6011 Reseda green Without electrical installation incl. control cabinet with all installations relating to the system in accordance with CE standard. Operation on the cabinet door, without cable 1 unit Vibrating conveyor type HVSR 500x8000 completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested oscillating elements Chute width: approx. 500 mm Chute length: approx. 8,000 mm Chute height: approx. 170 mm Wall thickness: approx. 5 mm Feed height feed: approx. 450 mm Total height feed: approx. 770 mm Discharge height discharge: approx. 950 mm Total height discharge: approx. 1,120 mm Drive power: approx. 4.0 kW Weight: approx. 1,400 kg Machine colour: RAL 6011 Reseda green Rising vibrating chute (approx. 4.5 °) incl. screening zone 15 x 15 mm, L = 500 mm incl. metal-free zone made of wood, new (L = 1,500 mm) incl. metal detector, second-hand without electrical installation 1 unit HAAS scraper chain conveyor type HKF-490x11,000 completely refurbished / reconditioned with new bearings, tested conveyor chain and flights Podpfx Akjw H Eqzefsgk Width: approx. 500 mm (600 mm) Length: approx. 11,000 mm Trough height: approx. 570 mm With bottom curve: 45° Total height: approx. 6,700 mm Drive power: approx. 5.5 kW without electrical installation

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Pedpfx Aouhvhpjkfogk Electrical motor 75 kW

Condition: excellent (used), Year of construction: 2013, Chipper for producing cellulose or fuel chips manufactured by Heinola Finland. Podpjxxql Esfx Akfogk Drum diameter 900 mm Inlet width 700 mm Capacity up to 110 m3 per hour with max motor power Suitable motor powers: 70 to 160 kW Included in the delivery is one Bruks Vibro conveyor with metal detector and built-in screen.

Condition: refurbished (used), Wood chipper for sawmill waste type Erjo Edgings, slabs, rimmings and log tops. Pedpfeq Ebnbsx Akfjgk The chipper can produce pulp and board chips, or fuel chips

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed Pgodpfx Akjw I R Rnsfek S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput Pjdpfx Akjwbv Erefsgk - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Pgodjuz Hmxjpfx Akfsk Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt Podsful Uiepfx Akfogk - 2.000 mm discharge conveyor belt

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt Pjdpfenyidbex Akfegk - 2.000 mm conveyor belt underneath the machine

Condition: as good as new (ex-display), Infeed width: 720 mm Infeed height: 330 mm Rotor diameter: 1,000 mm Rotor knives: 2 pcs Pgedsgabfqopfx Akfok Stator knife: 1 pc Infeed unit: 2 x 3 rollers Motor: 110 kW Machine weight: approx. 8,000 kg

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Pgsdpfx Asgabfbokfek Motor: 250-500 kW Machine weight: approx. 30,000 kg

Year of construction: 2024, condition: new, Drum for Doppstadt screener SM 518 and SM 620 on stock. CHECK AVAILABLE PERFORATIONS. We manufacture and provide drums for mobile and stationary screeners, for : - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 - Doppstadt SM 620 - Doppstadt SM 718 - Doppstadt SM 720 - Doppstadt SM 725 Pjdpsfi Tqbjfx Akfjgk also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality.. In case of any question, please contact me by mobile or e-mail.

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : - Eggersmann T 40 - Terra Select T 4 - EggersmannT 50 - Terra Select T 5 - Eggersmann T 55 - Terra Select T 6 - Eggersmann T 60 - Terra Select T 7 - Eggersmann T 70 - Eggersmann T 80 also Doppstadt, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail.. Pgjdpefkm Dfofx Akfsk

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : Pronar MPB 18.47 Pronar MPB 20.55 Pronar MPB 20.72 also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey... Pgedjfkm Dpopfx Akfjk Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail.

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm - without electric motor Pgedpfx Akjvzw Tfjfek