Used Abrasive Belts for sale (9,647)

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: 1. Cutting to Length Machine – CTB-L/W-1800      Quantity: 1 Maximum cutting width: 1800 mm Cutting angle: ±55° / 90° Pneumatic pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 2. Skiving Machine – SKV-C-N      Quantity: 1 Skiving speed: 30–200 mm/s Pneumatic pressure: 0.7 MPa Installed power: 7 kW Application: abrasive belt joint preparation / skiving 3. Abrasive Belt Press – PRS-480       Quantity: 1 Rated pressure: 15 tons Maximum width: 400 mm Press board temperature: 20–60°C Press holding time: 0–999 sec Power supply: 220V / 1PH / 50Hz 4. Rolling Abrasive Belt Press – PRS-R-1900        Quantity: 1 Pressing width: 1900 mm Pressing mode: Rolling Pressure: 350 kgf Press board temperature: 20–60°C Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 5. Jumbo Roll Slitting Machine – SLT-R-1650N Quantity: 1        Slitting width: 50–1650 mm Slitting speed: 2–10 m/min Blade pressure: 6–60 kgf Slitting accuracy: ±0.5 mm Working pressure: 0.7 MPa Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 6. Narrow Belt Slitting Machine – SLT-B-300   Quantity: 1 Bedpfx Aozrzk Eeirodi Application: narrow abrasive belt slitting 7. Belt Slitting Machine – SLT-B-650        Quantity: 1 Belt width: 10–650 mm Belt length: 530–4000 mm Blade pressure: max. 500 kgf Belt tension: max. 160 kgf Air pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 8. Wide Belt Slitting Machine – SLT-B-1600 Quantity: 1 Maximum slitting width: 1600 mm Belt length: 1400–3200 mm Air pressure: 0.7 MPa 9. Abrasive Disc Punching Machine – PUN-40T1500    Quantity: 1 Stroke: 5–150 mm Power supply: 380V / 3PH / 50Hz 10. Portable Forklift – ELS500-1000KG   Quantity: 1 Application: material handling / lifting equipment 11. Moulds / Cutting Dies   Quantity: 44 pieces Various moulds / cutting dies for abrasive disc production Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Condition: used, Technical specifications: Working width: 1 Calibrating unit Shaft diameter: 190 mm 2 Grinding unit Height of workpiece: 160 mm Air blowing on the abrasive belt on unit 1/2 Diameter of dust extraction nozzle: 100 mm Electric lifting Digital display Safety switch Main motor power: 18.5 kW Bsdpfx Aeziavzsirodi Overall dimensions: Length: 1850 mm Width: 1150 mm Height: 1870 mm

Condition: ready for operation (used), Working width: 1000 mm Combination unit with pneumatic shoe Shoe set automatically Pneumatic belt tensioning Pneumatic oscillation Bodpfxozxzhwo Airedi Pneumatically activated shoe (lub: Shoe activated by air blast – w zależności od kontekstu) Electric table adjustment Two feed speeds Thickness gauge Abrasive paper: 1030x2100 mm

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 11068, total width: 230 mm, total height: 230 mm, total length: 320 mm, overall weight: 6,000 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, We offer this demonstration machine, Heesemann Type HSM .4 RQHD, manufactured in 2026. It is currently located in our showroom in AT-4894 Oberhofen am Irrsee. Machine Type: Type HSM .4 RQHD, ROLLER/TRANSVERSE/LONGITUDINAL BELT/DB-S, Grinding width 1,350 mm Machine Number: 11068 Year of Manufacture: 2026 Machine Data: Multi-purpose surface grinding machine, Type HSM .4 RQHD ROLLER/TRANSVERSE/LONGITUDINAL BELT/DB-S Grinding width 1,350 mm Frame construction with conveying table With continuous conveyor belt, feed rate 3 - 15 m/min, frequency-controlled, constant working height 880 mm, machine upper part adjustable (3 - 160 mm) depending on the workpiece thickness, integrated control cabinets. Pressure roller (Ø 50 mm), pivoting, in the machine infeed, incl. oversize control Workpiece suction system with variable vacuum (controlled via vacuum sensor) for the safe transport of workpieces shorter than 500 mm in the feed direction, integrated fan with frequency inverter, drive power 4 kW Automatic workpiece thickness measurement in the infeed Non-driven rollers (in the machine infeed and outfeed) Bdsdpfx Ais Aft Rbersi Fold-down table in the machine outfeed, with wooden plate Industrial PC 15.6" Program memory for 1,000 programs Program for remote maintenance Program for dust extraction flap control MMI package consisting of: Intuitive machine operation with self-explanatory symbols LED strips in the outfeed and infeed as operator assistance for the workpiece (Infeed workpiece positioning for better grinding belt utilization, outfeed displays workpiece position) Display of belt manager status on the unit (screen) Unit information with grit size (screen) Visualization of the workpiece position during passage through the machine 1 Contact roller unit with steel roller Grinding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 Transverse grinding unit Grinding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency inverter 1 Longitudinal grinding unit with pressure fin belt system Grinding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 16 m/s Drive power: 15 kW Frequency inverter 2 Pressure bar with computer-controlled selective pressure control system CSD® (10 years warranty) 1 Rotating disc brush unit DB-S 10 driven disc brushes, working in 2 rotation directions, central height adjustment for abrasive wear, incl. quick-change device for disc brushes Brush covering: Flex-Trim K220 (1 set) Diameter: 150 mm 1 additional set (10 pcs.) of discs with stranded wire covering (0.25 mm) Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply Energy Management System EMS Belt support side: left Terminal: front left If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), CATALOGUE NUMBER: 6929 TECHNICAL DATA - Length of workpiece: 2800 mm Bodpfj Af Itgex Airsdi - Width of workpiece: 950 mm - Main motor: 5.5 kW - Fan motor: 2.2 kW - Width of abrasive belt: 160 mm - Diameter of dust extraction nozzle: 185 mm - Rotation: clockwise/counterclockwise - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight: approximately 1000 kg ADVANTAGES – Unpainted – Made in Germany – Complete documentation (DTR) – Used sander, very good condition Net price: 8900 PLN Net price: 2070 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: excellent (used), Working width: 110 cm First unit: steel roller Second unit: combination – rubber roller plus pad Pneumatic belt cleaning Pneumatic oscillation with photocells Electric table height adjustment (up/down) Pneumatic belt tensioning Two feed speeds Abrasive belt size: 2200 x 1130 mm Voltage: 400 V Motor: 12 kW Weight: 1542 kg Bjdpfjzxzkfsx Airjdi Year of manufacture: 2004

Condition: used, Year of construction: 1990, TECHNICAL DETAILS General Information Machine Type: Continuous belt grinding machine Application: Grinding and/or polishing of round materials Grinding Stations: 2 Machine Weight: approx. 6.5 t Working Area Bedpfxez S I Rde Airjdi Working Area Diameter: 30 mm Material Length: 3,000–6,000 mm Speed: 20 m/min Dimensions Space Requirement: approx. 9 × 2 × 2.4 m EQUIPMENT 2 Grinding Units

Condition: used, Brilliant 1 1100 Cd coating line High-quality product from Switzerland CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine-sanding machine Bedpfxez R S Hhe Airsdi Combined unit: contact roller and sanding pad unit with electronically controlled segmented sanding shoe, DIAGONAL / entire sanding unit adjustable by 10° Contact roller level adjustable continuously according to grit scale Power connection approx. 14 kW Working width 1100 mm Coating sanding package: oscillating belt abrasion continuously adjustable sanding belt speed Feed rate 3 - 15 m/min, continuously adjustable stable vacuum table with coating pad, fan integrated into the machine stand Thickness adjustment across the entire working width ENORMATIC quick adjustment with feed release (for long workpieces) Touchscreen display for automation and management of all work programs additional, robust infeed and outfeed tables, foldable First delivery 2014 / from leasing return Machine is in VERY WELL-MAINTAINED condition available from stock in Lieboch

Condition: excellent (used), Year of construction: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and one motor, sanding from above Working width: 1100 mm Abrasive belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 – 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st unit: Rubber-coated sanding roller, 90 Sh, 2nd unit: Fixed sanding pad & air cushion sanding pad, timer controlled Compressed air requirement: approx. 6 bar Extraction connection diameter: 2 x 150 mm Approx. dimensions (L x W x H): 1700 x 1750 x 1800 mm Weight: approx. 1,400 kg Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Abrasive belt oscillation Abrasive belt (emergency) stop with disc brakes Table extension with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs newly covered graphite sanding pad inserts NEW bearings for return rollers NEW drive belts for the motor Note on used machinery: • Errors in technical specifications and prior sale excepted. Bodpfxsy Exhwo Airedi • Stated prices are ex works - free loading! • Machines have been cleaned and tested for functionality. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect the machines on site. • Special arrangements are only possible in writing. (Enquiries are only answered if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Bdodjychqzjpfx Airei Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Bodpfx Aieych Igjredi Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Bodpexqggcjfx Airedi Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Bodpod E Ixzjfx Airsdi • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Schuma Drive Conveyor Belts 37x310cm Bdjdoz R In Topfx Airsi Made in Germany 380V Power Supply 100% functional, in very good condition. Dimensions: 37x310cm, 40x300cm (total width). Price is for two units.

Condition: excellent (used), Year of construction: 1983, Wide belt sanding machine Manufacturer: Bütfering Type: C55 2550 Year of manufacture: 1983 Belt speed continuously adjustable via a frequency converter Bdedpfxs Ahgxre Airsi Table: 2,550 x 950 mm Stroke: 400 mm Belt dimensions: 7,100 x 150 mm Sanding motor power: 4 kW Fan motor power: 2.2 kW

Condition: ready for operation (used), Year of construction: 1977, Wide belt sander Bütfering see pictures Machine is immediately available Machine ran until a few days ago without problems in production Bedpfx Aijndcctorjdi but was very rarely used

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right Bsdpfe Aazaaox Airjdi - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), For sale: Bütfering AWS wide belt sanding machine – in very good condition – only 656 operating hours. Year of manufacture: 1989 The machine comes from a one-man carpentry shop. Bedpe Ahhiiefx Airjdi Single-belt machine with a combination unit. Digital display for sanding thickness. A pallet with new sanding belts in various grits is included! Available immediately. Loading with a forklift is possible.

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm. Bdodpfs Agbi Dsx Airoi

Condition: good (used), Year of construction: 1987, functionality: fully functional, Dear customers, we currently offer a very good, used vertical belt grinder for model and mold making, manufactured by F. Zimmermann. The technical details are as follows: Belt width: 250 mm Bdedpfx Aez S Eideirsi Grinding height: 400 mm Belt length: 2,400 mm Belt speed: 18 m/s Work table: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Dust extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot-operated emergency stop - Machine light - Motorized table angle adjustment with digital display Price plus VAT, which will be shown separately on the invoice.

Condition: new, functionality: fully functional, Year of construction: 2026, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. Bjdpfxeq Nxp Sj Airsdi 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 pneumatic pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Bsdpfxeznvp Ij Airedi Construction: Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: excellent (used), Year of construction: 2019, operating hours: 614 h, functionality: fully functional, machine/vehicle number: LB828023A, grinding width: 1,350 mm, power: 46 kW (62.54 HP), COSTA S6 CTT 1350 wide belt sanding machine Professional wide belt sanding machine COSTA S6 CTT 1350, equipped with 3 working units in configuration C25 + T + T. The machine is designed for high-quality calibration and sanding of wood-based panels and similar materials. Main technical data: * Working width: 1350 mm * Sanding belt length: 2620 mm * Working thickness: 3–160 mm Bsdpfezgbxfox Airjdi * Feed speed: 4–20 m/min * 1st unit: C25 roller unit, 18.5 kW * 2nd unit: sanding pad unit, 11 kW * 3rd unit: superfinishing unit, 11 kW * External cleaning brush: 1.1 kW * Approx. installed motor power: 46 kW * Power supply: 400 V / 50 Hz * Pneumatic pressure: 6 bar * HMI Vision control panel * CE compliant Machine suitable for professional woodworking and panel processing applications.

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Sanding width: 950 MM 1 calibrating unit with a metal roller 2 combination unit with a rubber roller and sanding pad Bdodpfx Aj Afunheiroi The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells 2 feed speeds Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled Bdodpfx Ais Af Uuberji 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)