Used Ae Machine Tools for sale (66,421)

Condition: good (used), MAchine come with toolholders. Rbjdpfxovk Ng As Adbot

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Rjdjmck Ryspfx Adbebt Weight approx. 1000 kg good condition

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm total power requirement / kW Rodpfx Adjig A Erjbjbt weight of the machine ca. 950 KG

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm Rsdsud Illepfx Adbjbt z-travel / mm Control TNC 355C

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant Rbedpfx Ajx U Sfnjdbst • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, x-travel 300 mm y-travel 275 mm z-travel 200 mm spindle tunring speed 40 - 2.000 U/min tool taper ISO 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Rbsdpfx Adsx Uru Ajbet Prior sale is reserved.

Condition: used, Year of construction: 2004, Operating hours: Control on: 3123 h Machine on: 2970 h Program run: 902 h Spindle runtime: 988 h Technical data: Travel X/Y/Z: 650 / 500 / 450 mm Clamping area: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 12,000 rpm Rbsdpfxewglape Adbot Table load max.: 400 kg Number of tool magazine positions: 20 Power: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Heidenhain iTNC 530 control - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimal quantity lubrication system - Approx. 25 tool holders

Condition: used, Stud welding machine with shielding gas and lift ignition HBS Type ARC 804 Serial No. 610652 Welding current up to 800 A at 5% duty cycle Welding voltage 30 V Open circuit voltage U0: 95 V Maximum stud diameter 10 mm Rbsdpox Urcasfx Adbjt Rated power 15 kVA Power supply 400 Volt, 50 Hz, 32 A plug Rated current 27 A - Welding current adjustable in 4 steps - Continuously variable welding time setting - Shielding gas connection with continuously adjustable time - Welding gun with lift ignition PMH70 - Hose package length 4.5 m - Ground cable with two leads and two ground clamps - Digital display for current welding time in ms - Indicator lights for external conductor failure (phase failure) - At maximum stud diameter, approx. 3 studs per minute - 1 piece stud holder Ø 8 mm (fitted), 1 piece stud holder Ø 10 mm, 1 support tube - Mobile on transport trolley - Approx. 20 kg welding studs M8 and M10 in steel and stainless steel, including 12 kg M8 x 25 in stainless steel Required space (L x W x H) 500 x 325 x 305 mm Weight of welding machine 60 kg Total weight with transport trolley 145 kg Good condition

Condition: reconditioned (used), feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, Updated Machineseeker description (with travel distances) Deckel FP1 Aktiv – 3 axes – partially overhauled – ready for immediate use Offered for sale is a Deckel FP1 Aktiv in technically inspected and partially overhauled condition. The machine has been professionally refurbished and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single part and small batch production. Redex Tdy Iopfx Adbjbt This is not an unchecked used machine but a technically overhauled tool machine with a clearly defined scope of performance and a predictable delivery time. Technical data and features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all existing adjustment options Renewal of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial overhaul provides an optimal compromise between operational reliability, cost-effectiveness, and availability. A complete overhaul of the guideways was not carried out, as there was no technical necessity for this. Scope of delivery Machine loaded free of charge Delivery time approx. 12 weeks

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Rsdod N Smhopfx Adbebt

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR Rjdpfx Asiqkc Iedbjbt year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Coolant Rbsdowtd Dyspfx Adbot

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Year: 2005 Rbjdpfex Tp Ahjx Adbjt

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Price is quoted net, ex-works, loaded. Condition: Used. Rbedpfx Aoxmgguodbjt

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Displacements: X = 300 mm Y = 160 mm Redpfxovuzg As Adbebt Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread)

Condition: used, Technical details: grinding spindle - swivable: ja ° spindle revolutions per minute : 2850 U/min work table:: 50 x 134 x 44 mm table movement: X= 265 mm table movement: Y= 165 mm dimensions of grinding wheel: Bohrung Ø 20 mm voltage: 380 V / Hz machine weight approx.: 113 kg dimension machine xH: 0,63 x 0,56 x 0,64 m Redpju Ng N Aofx Adbjbt Grinding machine for twist drill cutting angle 30° / 40° Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 100mm for clearance angle 40° and 90°, 3x clamping devices, prism 14mm, as well as test device with 12mm prism and magnifying glass 90mm adjustable Column rotatable 360° Grinding protection 2x 220V sockets *

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad grinding wheel dia. (used wheel): 175x35 mm total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) Rjdpfxsu Ng Hbj Adbebt version double grinding disc machine grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever *

Condition: new, Year of construction: 2025, functionality: fully functional, CORMAK UWS3 universal tool grinding machine for sharpening and tool grinding as well as drill bits, mills, chisels, tool bits, etc. grinding. Grinding machine intended for universal applications due to its adjustable 24-position head. It can be used for grinding drilling bits, mills, tool bits, etc. Durable design and precisely constructed spindle ensure optimal efficiency Diameter 100 mm Thickness 50 mm Hole diameter 20 mm Rjdpfx Asv E Ek Hedbjbt Speed 5200 rpm Sleeves diameter range 3–16 mm Taper angles range 0–180º Negative angles range 0–52º Clearance angles range 0–44º Tool holder longitudinal movement 140 mm Tool holder microregulation range 18 mm Longitudinal spindle movement microregulation range 6 mm Motor 0.25 kW 230V Weight 45 kg Machine dimensions 450×350×340 mm

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Rodexgdr Iepfx Adbjbt

Condition: used, Worm wheels and worm shafts for Schutte multi spindle automatic lathe, used Different sizes available Please, contact us for getting more information and pictures on mail(at) or Rjdpfx Adjvt Twwebsbt *

Condition: used, Year of construction: 1985, 1 unit universal milling machine, manufacturer Deckel, model FP 4 MA, serial no. 2204.1463, year of manufacture approx. 1985, Deckel Contour II control, milling table approx. 800x500 mm, 7 T-slots, approx. 25 tool holders. Rbjdpjyaxl Dsfx Adbjt

Condition: used, 1 piece universal tool milling machine, make Deckel type FP 4 A, serial no. 2204-1177, control by Grundig Elektronik, milling table approx. 800x500 mm, 7 T-slots. Rbsdsyaxk Tjpfx Adbet

Condition: used, Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm Rbedpfx Adofl Acijbjt -Dimensions: 1440/760/H1745 mm -Weight: 712 kg

Condition: used, Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm Rjdpfx Ascn Shrsdbobt -Length: 1020 mm -Weight: 6 kg

Condition: used, Grinding machine, angle grinder, lathe steel grinder, thread drill grinder, milling grinder, surface grinder, drill grinder, bench grinder -Manufacturer: Strohm Redpfxjfnxw Us Adbjbt -Handover: as is as seen -Protective window: damaged on one side -Binding bench: missing -Motor: AEG 0.22/0.3 kW -Speed: 680/1400 rpm -Coolant device: switchable, adjustable -Dimensions: 590/490/H1370 mm -Weight: 222 kg