Used Af 222 for sale (35,208)

Condition: used, maximum load weight: 28,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2025, Equipment: ABS, Legras SBS 2220 Moving Floor Trailer 90 m3 * SAF axles * 90 m3 loading volume * Disc brakes * Lift axle on the 1st axle * Air suspension * Pneumatic control * Load pressure gauge * Sliding tarpaulin * Side protection tarpaulin * Foldable mudguard for lighting system * LED lights * ADR-compliant wiring * Maintenance flap front left * ABS connection * 2 x 7-pin electrical connection * ISO air connections with red and yellow coupling heads * Toolbox * Access ladder and platform at the front wall * Double-wing rear doors * Maintenance flap front left Subject to prior sale and errors excepted! Sale exclusively subject to our General Terms and Conditions. Dsdpfx Adowx Uvwedjwf Important Notice: Despite careful checking of all details in our offer, errors may occasionally occur. In part, these can result from transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is given without guarantee and does not constitute a legal claim. Legal Information: This sales listing does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided is without guarantee and does not constitute warranted characteristics.

Condition: used, Year of construction: 2010, Overview The SE 68 B compressor was manufactured by the Belgian company Ateliers François S.A. in 2010. It was used by a big european contract bottler before it was dismantled. It is now located in our warehouse in Germany. Technical data Free air delivery: 2500 m³/h  (43,3 m³/min) Operating pressure: 40 bar Speed rpm: 498 Power: 450 kW Installation type: Mounted on skid with anti-vibration mounts Scope of Delivery  1 × High-pressure compressor 40 bar | Ateliers François  1 × Refrigeration dryer 1 × Electrical control cabinet (CE) Dwodpfjxrcmzjx Addsf

Condition: used, functionality: fully functional, mileage: 26,500 km, power: 205.94 kW (280.00 HP), first registration: 08/1983, overall weight: 14,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, Equipment: additional headlights, all wheel drive, differential lock, fog lights, trailer coupling, Firefighting water tender TLF 2000 Mercedes Benz 1428 AF Doka. 6 seats, GRP tank with a capacity of 2000 liters, rear pump FP 16/8. All-wheel drive, 8-speed manual gearbox. Rear light mast, siren system, perimeter lighting, camera, rear warning system. Front strobes, front work lights, battery isolator switch, and more. Rotating beacons (RKL) have been removed! Viewing possible by prior appointment. Dsdpsu Dm Insfx Addjwf

Condition: used, Year of construction: 2000, Overview This complete PET bottling line for CSDs, mineral water and other beverages dates mainly from the year 2000, with the exception of the blow molder (KHS, 2016) and some additional conveyor units. Depending on the bottle size, the line achieves an output of up to 22,000 bottles per hour and processes non-returnable PET bottles with a PCO 1810 neck finish. The bottles are packed in 6-packs on Euro pallets (120x80 cm) or DÜDO pallets (80x60 cm). The filler was originally designed as an aseptic filler, but is currently operated as a standard filler. The line is still in production in Germany until October 2025 and can be viewed there under real conditions. Technical details  Output: 13,500 bph - 1.5 l PET 15,000 bph - 1.0 l PET 22,000 bph - 0.5 l PET Neck finish: PCO 1810 Packaging formats: 6 x 1.5 L (six-pack) 6 x 1.0 L (six-pack) 6 x 0.5 L (six-pack) Pallet formats: Euro pallet 120x80 cm DÜDO pallet 80x60 cm Machine list  Blow molder | KHS | InnoPET Blomax 10S | 2016 | incl. Box Tipper BTW CDL 2000, incl. Lifting & Tipping Unit InnoPET F25R (2016), for automatic preform feeding Compressor | Atelier Francois | CE46B | 2000 | - Air conveyor | Krones | AIRCO S | 2000 | - Air conveyor | Krones / Sismatic | - | 2016 | - Mixer | Krones | MS 25/2 | 2000 | - Tribloc (Rinser, (rinser, filler, capper) | Krones | - | 2000 | 100 rinsing points (Variojet), 80 filling valves (volumetric PET), 15-head screw capper (PCO 28 - 1810), Pitch 113 mm Injector | Krones | Varojet 2520-070-113 | 2000 | - Fill level/cap inspection | Krones | Checkmat FM-G | 2000 | - Container/label inspection | Krones | Checkmat FE-G | 2000 | - Labeller | Krones | Canmatic 720-15 | 2000 | - Container transport | Krones | Synco S | 2000 | - Packaging machine | Krones | Variopac TFS-60 | 2000 | One- way packer Container transport | Krones | S | 2000 | - Pack transport (2 pieces) | Krones | Multico S | 2000 | - Carrying handle applicator | Twin- Pack | - | 2000 | - Palletizer & Depalletizer | Krones | ROBOT 3A | 2000 | - Pallet conveyor | Krones | - | 2000 | - Pallet inspection | Krones | LPKD | 2000 | - Layer pad inserter | Krones | Pressant F1M-0467 | 2000 | - Pallet labeler | Logopak | Logomatic 920 PF | 2000 | - Dodpfsw Sux Rex Addswf

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Equipment: rotational speed infinitely variable, General Description and Basic Technical Data The roll forming line consists of the following equipment: 1) Decoiler 2) Roll forming section with entry device, sheet lubrication, and profile length measurement 3) Flying shear 4) Runout conveyor 5) Hydraulic unit 6) Control panel 7) Electrical cabinet Basic technical data of the roll forming line: - Input strip width: max. 220 mm - Input strip thickness: 0.5 – 0.8 mm - Material: galvanized steel sheet ČSN 11321.21 - Inner coil diameter: 500 - 600 mm Dedsxy Ny Ropfx Addowf - Max. outer coil diameter: 1600 mm - Max. coil weight: 1500 kg - Roll forming speed: 30 – 80 m/min - Length of cut profiles: 2 – 6 m - Number of forming stands: 11 - Total line weight: approx. 3800 kg Decoiler Basic technical data: - Inner coil diameter: 500 – 600 mm - Max. outer coil diameter: 1600 mm - Coil width: max. 220 mm - Max. coil weight: 1500 kg Entry Device Basic technical data: - Input strip thickness: max. 2 mm - Material width range: 70 – 220 mm

Condition: used, mileage: 1,31,000 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: mechanical, emission class: euro6, color: yellow, Year of construction: 2021, Year of manufacture: 2021 Cab: double Djdpfx Ajxuggqoddswf VAT/margin: VAT qualifying 6-seater PTO Hydraulic Like new

Condition: used, Camam vertical/horizontal mortising machine, model AF/12-B1, composed of 3 horizontal spindles and 3 vertical spindles per side, 8 oscillations, tilting benches, used, tested. Dsdpfx Adjmf Eh Iedjwf

Condition: used, ILD2200-3(222), optoNCDT 2200, Micro Epsilon Laser Triangulation Sensor System Model: ILD2200-3(222) Condition: Used Dwodpfxjq S Sl Ee Addjf

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, working height: 60 mm, TECHNICAL DETAILS X-axis travel: 6,000 mm Y-axis travel: 1,650 mm Y-axis travel (for milling): 1,750 mm Maximum working height for trimming: 60 mm Maximum applicable edge height: 65 mm Minimum inner radius: 30 mm Tool change positions: 18 Aggregate saw blade diameter: 200 mm (max.) MACHINE DETAILS Vertical electrospindle (C-vector axis, automatic tool change, cone type HSK F63): 11 kW Drilling head output: 4 kW Vertical drilling spindles in X-axis: 11 Vertical drilling spindles in Y-axis: 6 Horizontal drilling spindles in X: 6 Electrical Data Voltage: 400 V Current: 39 A Frequency: 50 Hz Current: 50 A Control voltage: 24 V EQUIPMENT Numerical control with WoodWop software Adjustable panel support rails for suction cup positioning Pneumatic rods for loading/unloading assistance Adjustable Schmalz-type vacuum suction cups Laser positioning system for suction cups Independent edge-banding unit with 360° rotation Glue pot and premelter for granular EVA adhesive Applicable edge materials in rolls: PVC / ABS 0.4 – 3 mm Rubberized pressure roller + panel preheating lamp Edge trimmer Combined trimming/edge unit Edge holder magazine Chip extraction system with motorized conveyor belt Air conditioning unit for cooling and cleaning of machine control Dwedpfx Ajxx Nnxsddef Automatic lubrication system Vacuum pump

Condition: ready for operation (used), Year of construction: 2012, Control Unit Model Series 0iMD Brand FANUC Main Drive Spindle speed range 1000 rpm Number of axis 4 Movement X-Axis Movement 1600 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Table Outer length 1700 mm Outer width 800 mm Table load 2000 kg Additional Equipment Options included: 4th axis This 4-axis AWEA AF-1600 vertical machining centre was manufactured in 2012. It features a large table size of 1700 mm x 800 mm with a load capacity of 2000 kg, and a spindle speed of 1000 rpm. Equipped with a Fanuc Series 0iMD control and a 16-position tool magazine, the AWEA AF-1600 machine we have for sale is ideal for complex machining tasks. Contact us for further details regarding this vertical machining centre. Dwedpfex D S Dtox Addsf Application Types Milling

Condition: good (used), AF/Armafix pipe supports, pipe supports -Manufacturer: Armacell, Armafix AF pipe support FX-2-60/64 AF-2 box with 24 pcs. -Article No.: 38407000 -Tube: Ø 60/64 mm -Quantity: 5x box available Djdpfx Adst Acwhsdjwf -Price: per box -Dimensions box: 390/200/H200 mm -Weight: 1,5/pc.

Condition: ready for operation (used), Siemens 548 222 9101. Machine card 03 841-A, E-version B 00 SN 116, used, good condition, 100% functional, delivery as shown in the photos. Dwedpfox Dw T Hsx Addsf

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: AF25-X, filter area: 200 m², volume flow: 25,000 m³/h, total width: 2,450 mm, total length: 3,600 mm, total height: 7,000 mm, Equipment: documentation/manual, DUSTY AIR FILTER - ATEX Design air flow: 25,000 m³/h Structure: Galvanized, press-formed and bolted sheet metal, thickness 2-3-4 mm Total filter surface area: 200 m² Filter fabric: Antistatic, 500 g/m² Pre-dust separation zone ATEX explosion relief panels - horizontal positioning Discharge: Motorized screw conveyor 1.1 kW, rotary valve 0.75 kW Dwjdpoxu Df Rsfx Addof Access ladder and upper guardrail Electrical control panel Electric suction fan 30 kW

Condition: used, mileage: 37,500 km, power: 177 kW (240.65 HP), first registration: 08/1997, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 5,640 kg, empty load weight: 7,860 kg, gearing type: mechanical, Equipment: all wheel drive, differential lock, hydraulics, trailer coupling, All-wheel drive, 2 differential locks, PTO (power take-off), 6-speed transmission, Special vehicle: fire engine LF16, Water tank, Dwodpfx Adsx Ec Sksdjf Hose reel, Metz fire pump, Rapid intervention hose, Metz aluminium body, Gross weight: 13.5 t, Payload: 5.64 t, Trailer hitch, Good condition, Vehicle drives nicely, Firefighting equipment has not been tested for functionality, German registration There may be markings/inscriptions on the vehicles. Mileage according to the odometer. Vehicle is preferably sold to traders or for export, Private buyers subject to reservation. Sale without guarantee. The above information is non-binding; errors, changes, and prior sale reserved! Telephone: 08026/2188

Condition: excellent (used), Year of construction: 2024, For sale is a Felder AF-22 extraction unit with a maximum air volume flow of 3100 m³/h. The extraction unit is in very good condition and has been checked and serviced by our specialist staff. Technical specifications: - Extraction capacity: 3100 m³/h - Max. negative pressure: 2510 Pa Dsdpfxsxxiy Ue Addjwf - Extraction connection Ø 160 mm - Chip container volume: 2 x 200 liters - Incl. dust filter cartridge + shaker device - Year of manufacture: 2024 - Motor power: 3 kW The extraction unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: extraction unit, dust extraction, filter, cartridge filter Reference: R-E28WO

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2140 mm Measurements depth 3590 mm Measurements height 2630 mm Machine weight 7000 kg Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 4 Movement X-Axis Movement 1020 mm X-Axis Rapid Traverse 36000 mm/min Y-Axis Movement 550 mm Y-Axis Rapid Traverse 36000 mm/min Z-Axis Movement 635 mm Z-Axis Rapid Traverse 30000 mm/min Dwjdpfxex D R Dfo Addof Table Tslots size 18 mm Number of tslots 5 Table load 500 kg Tools Max weight 7 kg Max tool diameter 80 / 150 mm Max tool length 250 mm This 4-axis AWEA AF-1000 vertical machining center was manufactured in 2017. It features a 1020 mm X-axis travel, 550 mm Y-axis travel, and 635 mm Z-axis travel. Equipped with a high-speed 12,000 rpm spindle, ISO 40 taper, and a 24-tool arm changer. Includes a 4-axis continuous table and chip conveyor. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2808, total height: 2,400 mm, total length: 3,300 mm, total width: 2,200 mm, feed length X-axis: 450 mm, feed length Y-axis: 250 mm, feed length Z-axis: 350 mm, overall weight: 7,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, CNC grinding center for external, internal, and profile grinding with three linear axes and a swiveling grinding head. Modularly configurable for various grinding tasks, featuring automated dressing cycles, modern control system, tool management, and options for measurement systems as well as peripherals such as coolant treatment and extraction. Dwodpfx Ajxuicheddef

Condition: ready for operation (used), Suhner AF 100L/6A-11 motor SN 214847801-4, used, minor signs of use, 100% fully functional, scope of delivery as per photos. Djdex Dwfijpfx Addswf

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 50,000 m³/h, total width: 2,400 mm, total length: 9,000 mm, total height: 8,000 mm, compressed air connection: 6 bar, Equipment: documentation/manual, Bag filter - galvanized steel structure - airflow rate: 50,000 m³/h filter cleaning by reverse air jet with control unit (new control unit, new solenoid valves) filtering surface area: 512 m² No. 01 settling chamber dimensions: 9000 x 2450 x h8000 mm Dwjdpfxexfb D Ej Addsf No. 05 ATEX explosion-proof ventilation panels discharge of filtered material: screw conveyor, rotary valve upper safety guardrail ladder electrical control and starter panel (optionally available with inverter) No. 01 electric fan, kW - to be defined with user COMPLETE WITH CE DOCUMENTATION - USER AND MAINTENANCE MANUAL

Condition: used, mileage: 37,500 km, power: 177 kW (240.65 HP), first registration: 08/1997, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 5,640 kg, empty load weight: 7,860 kg, gearing type: mechanical, Equipment: all wheel drive, differential lock, hydraulics, trailer coupling, All-wheel drive, 2 differential locks, Power take-off, 6-speed gearbox, Special vehicle firefighting truck LF16, Water tank, Dwjdpfx Ajx Ec N Noddef Hose reel, Metz fire pump, Rapid intervention hose, Metz aluminum body, Total weight 13.5 t, Payload 5.64 t, Trailer hitch, Good condition, Vehicle drives well, Firefighting equipment has not been tested for functionality, German registration Labels may be present on the vehicles. Mileage according to odometer Vehicle is preferably sold to tradespeople or for export, Private buyers excepted, sale subject to reservation Sold without warranty The above information is non-binding, errors/changes and prior sale reserved!!! Telephone: 08026/2188

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 8200 kg Control Unit Model 0i-MF (Opt. Manual Guide type I) Brand FANUC Dsdpfx Ajx D I Rcsddjwf Movement X-Axis Movement 1400 mm X-Axis Rapid Traverse 48 m/min Y-Axis Movement 620 mm Y-Axis Rapid Traverse 48 m/min Z-Axis Movement 620 mm Z-Axis Rapid Traverse 36 m/min Table Outer length 1500 mm Outer width 620 mm Min distance between vertical spindle and table 100 mm Max distance between vertical spindle and table 720 mm Table load 1000 kg Tools Slots in storage 30 Max weight 7 kg Max tool diameter 75 mm Max tool length 150 mm Media Internal cooling Yes This 4-axis AWEA AF 1460 vertical machining center was manufactured in 2018. It features a FANUC 0i-MF control unit, rapid feeds up to 48 m/min, and a tool magazine with 30 positions. The machine includes a 4th axis rotary table, chip conveyor, and coolant through the spindle at 15 bar. Ideal for complex machining tasks, the AWEA AF 1460 machine we have for sale is robust and versatile. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 8,000 mm, total width: 2,500 mm, total length: 2,400 mm, filter area: 160 m², volume flow: 20,000 m³/h, Self-cleaning bag filter - NEW - Airflow capacity: 20,000 m³/h Dimensions: approx. 2500 x 2400 x H 9000 mm Total filter media surface: 160 m² Dwjdpjxu Dh Sofx Addjf Filter media type: antistatic Filter media cleaning by reverse air jet, control via sequencer unit - Screw conveyor, rotary valve for discharge of filtered material into big bag collection system - Electrical control panel for the machine - Suction fan, power to be defined with end user - Discharge fan for filtered material, power to be defined with end user Machine supplied with CE declaration, operating and maintenance manual.

Condition: good (used), mileage: 26,000 km, power: 129 kW (175.39 HP), first registration: 01/1994, fuel type: diesel, color: blue, axle configuration: 4x4, gearing type: mechanical, Equipment: all wheel drive, differential lock, parking heater, trailer coupling, downgraded to 7.5 t, Chassis originally 9.5 t, 9 seats, New TÜV (MOT/inspection) upon sale, Historic registration (H-license plate) possible, Dwjdpox Ec Ixsfx Addjf 4x4, Selectable all-wheel drive with crawler gear, Differential locks, Wheelbase 3.60 m, Crew transporter, Box body with roller shutters, Walk-on roof, 5-speed gearbox, Tow hitch (pintle) with air connections, Auxiliary (parking) heater, New batteries, Repairs worth €2,200 carried out by Mercedes specialist, One owner, Unmodified, Sole user/operator: THW (German civil protection), Very low driving noise due to sound-insulated tilting cab. Runs optimally: tight, tracks straight, no play or vibrations under load. Labels/markings may be present on the vehicles. Mileage as per odometer. Vehicle preferably sold to trade or for export, Private buyers subject to approval. No warranty offered with sale. The above information is non-binding; errors, changes and prior sale reserved! Phone: 08026/2188

Condition: good (used), mileage: 26,000 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, first registration: 01/1994, color: blue, Equipment: all wheel drive, differential lock, parking heater, trailer coupling, De-rated to 7.5 t, chassis originally 9.5 t, 9 seats, inspection (HU) will be renewed upon sale, possible historic (H) registration, 4x4, selectable all-wheel drive with reduction gear, differential locks, wheelbase 3.60 m, crew transport vehicle, box body with roller shutters, roof walkable, 5-speed gearbox, trailer coupling (pintle hook) with air connections, auxiliary heating, new batteries, maintenance work amounting to €2,200 carried out by Mercedes specialist workshop. One owner, unmodified, single holder and use by THW (Federal Agency for Technical Relief), very low driving noise due to sound-insulated tilting cab. Drives optimally, firm, tracks straight, with no drivetrain play or vibrations. Dwedpfx Adox Ec H Iedef There may be signage on the vehicles. Mileage according to odometer. Vehicle is preferably sold to commercial traders or for export, private sale subject to reservation. Sold without warranty. The above information is non-binding, errors/changes and prior sale reserved. Tel: 08026/2188

Condition: good (used), mileage: 26,000 km, power: 129 kW (175.39 HP), first registration: 01/1994, fuel type: diesel, color: blue, axle configuration: 4x4, gearing type: mechanical, Equipment: all wheel drive, differential lock, parking heater, trailer coupling, downrated to 7.5 t, chassis originally 9.5 t, 9 seats, new inspection (HU) upon sale, H-license plate possible, 4x4, selectable all-wheel drive with reduction gear, differential locks, wheelbase 3.60 m, crew vehicle, box body with roller shutters, walk-on roof, 5-speed gearbox, tow hitch (jaw-type) with air connections, auxiliary heater, new batteries, repairs worth €2,200 carried out by Mercedes specialist, first owner, unmodified, only owner and user: THW (Federal Agency for Technical Relief), very low driving noise due to sound-insulated tilting cab. Runs optimally, tight, tracks true, no play or vibrations under load. Vehicle may have lettering/markings. Mileage according to odometer. Vehicle is preferably sold to business customers or for export, private sale subject to reservation. Sold without warranty. The above information is non-binding, errors/changes and prior sale reserved! Djdpsx Ec Huofx Addswf Tel: 08026/2188