Used Aircenter Sm 12 for sale (59,381)

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Hsdpjxw Rdfefx Adwjng Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: used, Year of construction: 2025, lifting height: 4,000 mm, fuel type: diesel, motor manufacturer: Volvo-Diesel, Lifting capacity: 25.000 kg Hnjdpfx Aox If H Esdwjg Please contact Sales Team for more information

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,233 h, load capacity: 15,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,145 mm, fork carriage width: 2,540 mm, empty load weight: 23,300 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,540 mm, Diesel Forklift Load Center of Gravity: 1200 Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Very good Front Tire Type: Pneumatic Front Tire Size: 12.00-20 Rear Tire Type: Pneumatic Rear Tire Size: 12.00-20 Description: In addition to this Konecranes model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire-purchase and financing at favorable conditions are always available. We are also happy to purchase your used forklift, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this SMV15-1200C. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Crane arm Heating, full cab, full free lift, Hnodpfx Aov Uttbedweg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm MACHINE DETAILS Hnodpfxsxwuaqj Adwsg Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling Hodjxqyg Nopfx Adweng 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: used, Year of construction: 2004, lifting height: 2,500 mm, mast type: duplex, battery manufacturer: EMROL, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,200 mm, Empty weight: 773 kg Battery: 225 Ah, 24 V, Year of manufacture 2017, Brand of battery EMROL Hsdpox El Tyefx Adweng Lifting capacity: 1.250 kg CE mark: yes General condition: average Technical condition: average Visual appearance: average Please contact Theo Lelie for more information

Condition: used, Year of construction: 2024, operating hours: 195 h, machine/vehicle number: 825122, mast type: telescopic, fuel type: diesel, Empty weight: 7.550 kg Lifting capacity: 250 kg Hnsdpfxet Ezmys Adwjg Working height: 1.410 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1070 m Transport dimensions (LxWxH): 6.34x2.25x2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, lifting height: 4,400 mm, fuel type: diesel, motor manufacturer: Volvo-Diesel, Lifting capacity: 42.000 kg Hsdpfjx If Dkox Adwjng Please contact Sales Team for more information

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,592 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel forklift Load center: 1200 Fork width: 200 mm Fork thickness: 110 mm Mast type: Standard Gearbox: NEW Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Hnedpfx Aeu Dzq Redweg Front tires size: 12.00-20 Rear tires Type: Air Rear tires Size: 12.00-20 Description: In addition to this Konecranes model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this SMV20-1200B P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, heating, full cab, air conditioning, NEW ENGINE AND GEARBOX

Condition: excellent (used), MANUFACTURER: KAESER MODEL: SM12 SERIAL NUMBER: 1024 YEAR: 2011 POWER (kW): 7.5 CAPACITY (m3/min): 1 PRESSURE (bar): 11 OPERATING HOURS (DOC/TOTAL): FREQUENCY CONVERTER: no Hodpfjxyaq Hsx Adwong BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): air ON TANK: no DOCUMENTATION: no

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F Hedpfx Aou R A Dljdweng - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: used, Year of construction: 2004, operating hours: 2,913 h, lifting height: 2,500 mm, mast type: duplex, battery manufacturer: EMROL, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,200 mm, Empty weight: 773 kg Battery: 225 Ah, 24 V, Year of manufacture 2017, Brand of battery EMROL Lifting capacity: 1.250 kg CE mark: yes Hnjdpfxjx El Tts Adwsg General condition: average Technical condition: average Visual appearance: average Please contact Bas Sindorf for more information

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Speed: 3000 / max: 5000 rpm -Gearbox: Wittenstein SP 140S-MC1-10 -1K1-2K i= 10 -Shaft: Ø 40 x 80 mm -Number: 2x geared motors available Price: per piece Hnsdpfx Adexr A Niowjg -Dimensions: 490/190/H260 mm -Weight: 41.2 kg/pc.

Condition: excellent (used), Year of construction: 2016, operating hours: 6,700 h, Kaeser SM 12 (2016) – Screw Compressor in Excellent Condition For sale: Kaeser SM 12 screw compressor from 2016 in excellent, well-maintained condition. Reliable, quiet, and energy-efficient compressor – ideal for workshops, print shops, or manufacturing facilities. Technical specifications: Manufacturer: Kaeser Kompressoren Model: SM 12 Hnodpfx Adoxprwkoweg Year of manufacture: 2016 Motor power: 7.5 kW Free air delivery: approx. 1.1 – 1.3 m³/min (depending on pressure level) Operating pressure: 8 / 10 bar Voltage: 400 V / 50 Hz Integrated Kaeser Sigma Control Basic Low-noise operation, compact design

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) Hnodjqxandjpfx Adwjg cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: excellent (used), Year of construction: 2006, MANUFACTURER: KAESER MODEL: SM12 T S/N: 1002 YEAR: 2006 POWER (kW): 7.5 CAPACITY (m3/min): 0.8 PRESSURE (bar): 11 HOURS (DOC/TOTAL): 21671/31930 FREQUENCY INVERTER: NO INTEGRATED DRYER: YES Hjdpjxyaqmofx Adwong HEAT EXCHANGER: NO COOLING (AIR/WATER): AIR

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Hnsdevv Ud Rspfx Adwjg Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Max. X stroke mm 520 Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Max. diameter of tools without adjacent tools mm 140

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. Hodpfxer Ak Exj Adwsng There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Hnodorb E Hqjpfx Adwjg -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Year of construction: 2015, condition: used, functionality: limited functionality, machine/vehicle number: (QEV111AHE1VM), "Laser printing technology – monochrome- We have 2 pieces available of this model with similar characteristics: Monthly duty cycle (max.) 200000 images Maximum copy speed Up to 45 pages per minute Maximum print resolution Up to 1200 x 1200 dpi Maximum print speed Up to 45 pages per minute Maximum media capacity 2300 sheets Output trays capacity 500 sheets" Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer if you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Sebes, Romania Hnedpfoxnxrrsx Adwjg The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, bore capacity in steel (diameter) // mm Hsdpfx Ajxn Aqrodwsng throat / mm bore stroke / mm ABARBOGA MASKINER GSMK6012 Drill press WITHOUT VISE

Condition: used, Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Hsdpfx Adsxxlnuewong Thickness: 400 mm Height on feet: 910 mm Class 2 Weight: approx 2 T

Condition: new, functionality: fully functional, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, total length: 13,000 mm, total width: 3,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, GS13030CS MAX Ultra-Large Format Single-Platform Sheet Cutting Machine Smooth and delicate cutting section, burr-free Equipped with bevel cutting head and system High-quality modular drag chain cables Beam safety light curtain Fully automatic grease injection system Hodjv Hnpzspfx Adwong

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 Hjdpfewcyngox Adwsng -Number: 3x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Hnodpfx Adowcyq Ieweg -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece