Used Air Heater for sale (29,107)

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Application areas: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating in the cold season Fuel: Heating oil EL Djdpfx Ajxwkw Ejp Dowc Rated heat output: 135 kW Rated heat input: 150 kW Oil flow rate: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater, 54.74 kW, Heating Capacity 5830 m³/h UDSA Gas-Fired Warm Air Heater – Efficient, even at peak loads The most well-known product from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install unit is available in 14 sizes, ranging from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room itself. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, including the gas and exhaust connections, must only be carried out by an approved installation company. The gas-fired warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L, with day-night-week program - Exhaust discharge via the roof, version B or C - Exhaust discharge through the outer wall, version C Gas-fired warm air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Dsdewb A Hiopfx Ap Dswc Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m³/h Protection class: IP20 Pin No. 0461BN0677 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), ApenGroup LRP28DE Gas-fired hot air generator Gas type: G20 natural gas Dedpsx Ihlksfx Ap Dowc Connection pressure: 20 mbar Rated heat input QN: 27 kW Rated heat output: 24.63 kW Connection voltage: 230V 1N, 50Hz Airflow rate: 2700 m3/h Protection class: IP20 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2020, Nominal output: 29.8 kW Dedoz A Eapjpfx Ap Dswc Air flow rate: 2400 m³/h Combustion chamber depth: 580 mm Loading door: 330 mm x 330 mm Heatable volume: approx. 600 m³ Heatable area: approx. 120 m² Space requirement: approx. 600 mm x 800 mm x 1900 mm Weight: 230 kg Flue pipe diameter: 160 mm Warm air outlet nozzle: 2 x 200 mm Operating modes: Automatic and manual Chimney diameter (approximate): 200 mm

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Dedpfxox Ihg Ij Ap Dewc Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. Dsdpfx Aex Ihiiep Dowc With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Dwsdpfx Apopn Nyze Djc Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg

Condition: new, Year of construction: 2026, Firing chamber output: 34 kW Working power: 29 kW Dsdjpkwhqepfx Ap Dswc New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Smoke outlet diameter: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Condition: new, Year of construction: 2026, Firebox output: 49 kW Working output: 45 kW New device, original packaging: yes Hot air blower, flue gas blower, control unit with digital display: included Hot air ducting: 2 x 200 mm with freely rotatable, plug-in bends Flue gas outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Airflow: 3500 m³/h Dodpfok Utrdsx Ap Dewc Power consumption: 550 W Designed for room volume: 1000 m³ Area to be heated: 200/250 m² Oven height without hot air ducting: 1750 mm Oven width: 700 mm Oven length without flue gas blower: 1150 mm Weight: 305 kg

Condition: new, Year of construction: 2026, Firebox output: 34 kW Working output: 29 kW New unit: yes, original packaging Warm air blower, flue gas blower, control unit with digital display: included Warm air ducting: 2 x 180 mm with freely rotatable, plug-in 90° bends Diameter of flue gas outlet: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Dsdpfxsk Utraj Ap Dewc Air flow rate: 2200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Area to be heated: 100/150 m² Oven height without warm air ducting: 1560 mm Oven width: 550 mm Oven length without flue gas blower: 920 mm Weight: 190 kg

Condition: new, Year of construction: 2026, Combustion chamber output: 510 kW Working output: 407 kW New, original packaging: Yes Smoke vent diameter: 250 mm Hot air supply ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Combustion chamber height: 900 mm Air supply: 26,000 m³/h Power consumption: 4500 W Designed for room volume: 8000 m³ Dedpek Utrwofx Ap Djwc Area to be heated: 1800 m² Oven height without hot air supply ducts: 3000 mm Oven width: 1220 mm Oven length without flue gas fan: 2700 mm Weight: 1575 kg

Condition: new, Year of construction: 2026, Firebox output: 175 kW Working output: 140 kW Exhaust duct diameter: 200 mm Warm air supply pipes: 3 x 250 mm Firebox length: 950 mm Firebox width: 600 mm Dodpfx Apsk Utrpo Dewc Firebox height: 860 mm Air supply: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air supply pipes: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: new, Year of construction: 2026, Firebox output: 125 kW Working output: 99 kW Diameter of flue outlet: 180 mm Warm air supply pipes: 2 x 250 mm Dwodpfx Aok Utrhsp Doc Firebox length: 750 mm Firebox width: 560 mm Firebox height: 700 mm Air supply: 6300 m³/h Power consumption: 1500 W Designed for room volume: 1500 m³ Area to be heated: 300/350 m² Oven height without warm air supply pipes: 1980 mm Oven width: 800 mm Oven length without flue gas blower: 1280 mm Weight: 415 kg

Condition: new, Year of construction: 2026, Firing chamber output: 350 kW Working output: 279 kW Exhaust duct diameter: 200 mm Warm air supply ducts: 3 x 300 mm Dwodpfx Apok Utrtj Djc Firing chamber length: 1200 mm Firing chamber width: 740 mm Firing chamber height: 1040 mm Air supply: 17800 m³/h Power consumption of warm air blower: 3 kW Power consumption of flue gas blower: 600 W Designed for room volume: 5000 m³ Area to be heated: 1000 m² Oven height without warm air supply ducts: 2500 mm Oven width: 1100 mm Oven length without flue gas blower: 1900 mm Weight: 850 kg

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm Dwjdpfx Ajyq Ricsp Dec - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: used, Year of construction: 2008, overall weight: 1,250 kg, total width: 1,220 mm, total length: 2,700 mm, total height: 2,245 mm, nominal heat output: 600 kW (815.77 HP), No. 10035 2 units stationary warm air heater / generator Kroll 730 S-300 Dodpszlr Uujfx Ap Dswc Used, year of construction 2008 According to our customer / the previous owner, the machines are fully functional and can be viewed on site Heat output QN: 600 kW Rated heat input QB: 652 kW Warm air flow rate VN: 48,300 m³/h Rated pressure DN: 300 Pa Motor: 15.0 kW / 28.6 A CE-compliant Transport dimensions each approx. 2700 x 1220 x 2245 mm LWH Weight each approx. 1250 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 08C35020538, power: 22 kW (29.91 HP), overall weight: 21 kg, total width: 540 mm, total length: 350 mm, total height: 590 mm, - Universally applicable - Easy to transport Dwodpfx Apsulvnrs Djc - For spot heating of workplaces or for quickly heating small to medium-sized rooms Further information can be found in the data sheet.

Condition: new, Year of construction: 2026, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Dwodpeyffyljfx Ap Doc Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements that are immersed in a steam cylinder filled with water. This can be ordinary tap water or completely demineralized water. The heat generated by the heating elements heats the water to a temperature of 100 °C. Technical data: Dwsdpfx Apeu Eb A Nj Dsc Dimensions (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Voltage supply: 400 V/3 Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G external Steam distribution For optimal humidifier performance, the steam produced must be distributed homogeneously throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with ventilated steam distributors or steam lances. The choice of steam distributor depends on the room in which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), ventilated steam distributors (optional) with a motor fan should be used. If, on the other hand, the steam is to be distributed in a duct or in HVAC systems, steam lances must be used, which utilize the velocity of the air flowing through for humidification. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE Dwsdpfezav Ddsx Ap Dec IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: used, Year of construction: 2006, FIAC CRS20 Soundproof Screw Compressor – Year 2006 Dsdpfx Apjzq Amre Dowc Complete with a 500-litre air receiver and FIAC DS20/AC refrigerated air dryer, ideal for ensuring a continuous supply of compressed air with low noise levels. Technical Specifications Air delivery (F.A.D.): 1,860 l/min Maximum pressure: 10 bar Power consumption: 17.6 kW Motor power: 20 HP Air receiver capacity: 500 litres Weight: 461 kg Availability: Delivery scheduled for September 2026.

Condition: used, Year of construction: 2022, cooling capacity: 241 kW (327.67 HP), type of cooling: water, empty load weight: 2,200 kg, We are offering directly on behalf of the owner: DAIKIN EWAT240B-SLB2016 – air-cooled chiller Manufacturer: DAIKIN Type: EWAT240B-SLB2016 Year of manufacture: 09/2022 Nominal cooling capacity: 241 kW Compressor: 4 × Scroll Refrigerant: R32 Refrigerant charge: 19 kg Temperature range TS: -20 / +150 °C EQUIPMENT / OPTIONS - OPTION-04 Compressor direct start (DOL) - OPTION-10 Second setpoint - OPTION-128 Master/Slave control, max. 4 units - OPTION-57 Evaporator auxiliary heater - OPTION-60 Electronic expansion valve - OPTION-67 Ambient temperature sensor and setpoint adjustment - OPTION-68 Operating hour counter - OPTION-69 Collective fault message - OPTION-70 External alarm contact - OPTION-97 Main switch - OPTION-11 Thermal protection relay for compressor - OPTION-21 Evaporator flange connection kit - OPTION-58 Evaporator flow monitor - OPTION-61 Hot gas shut-off valve - OPTION-62 Suction gas shut-off valve - OPTION-75 Rubber vibration dampers - OPTION-78 Single pump standard ESP - OPTION-91 Safety valves in double design with changeover valve - OPTION-96 Fan protection switch Weatherproof design: Standard housing with roof Dimensions unit (L x H x W): 2,326 x 2,540 x 2,236 mm Weight: 2,206 kg ELECTRICAL DATA Power consumption: 85.2 kW Voltage: 400 V / 3~ / 50 Hz Rated current: 190 A CIRCULATION PUMP Manufacturer: Wilo Type: IP-E 80/115-2.2/2-IE4 Power input P1: 2.6 kW Speed range: 750–2,940 min⁻¹ BUFFER TANK: FlexTherm PS-K Volume: 1,000 l Including insulation Cooling chamber with coil: Design: WK-com S-W B170/B318 supply air Technical data cooling coil: Air inlet T/RH: 35.0 °C / 40 % RH Air outlet T/RH: 20.0 °C / 82 % RH Medium flow rate: 32,140 / 33,563 l/h or kg/h Capacity: 169.4 kW Dodpfx Aez Dx E Ijp Dowc Control: 3-way valve + control manifold IP69 Switch cabinet for pump and control of the regulation

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ Dsdpfx Aexc T Evsp Djwc - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 2,40,000 mm, total height: 9,000 mm, Model: Saxon 5 Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Power: 220V single‑phase, 66 A Dwjdpjz H T Dwjfx Ap Doc Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Dwedpfxsu Nz Dne Ap Doc Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar *